Sunnydaze Decor DTA-287 30 Inch H 3 Drawer Classic Hall Console Table User Guide
- June 15, 2024
- Sunnydaze DECOR
Table of Contents
ENTRYWAY TABLE WITH DRAWERS
DTA-287
DTA-287 30 Inch H 3 Drawer Classic Hall Console Table
Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year
warranty period. Proof of purchase, with the date of purchase as well as
photos of the merchandise defect, must be provided. Photos are used to
determine the cause of defects and for future quality control. Register your
warranty at https://tiny.cc/SunnydazeWarranty If you have any questions,
comments or concerns, feel free to contact us by phone at
833-982-1977, by email:
customerservice@sunnydazedecor.com,
or via our contact us page at https://tiny.cc/SunnydazeContact
Carefully review assembly and care instructions before using this product.
Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging
the finish.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit
soon after purchase.
Check that all parts are accounted for and familiarize yourself with the
assembly before beginning.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INTRODUCTION
Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information.
| Read this manual carefully and follow the assembly instructions in the order
listed. Pay close attention to assembly drawings.
---|---
| Regularly clean with a clean microfiber cloth to prevent dust accumulation.
| Do not paint the unit.
Do not use abrasive materials or cleaners to clean the furniture; only use a
slightly moistened cloth.
| Indoor use only.
Do not expose the furniture to heat or humidity.
| When cleaning nearby the furniture, do not allow contact with water or
cleaners as it may deteriorate the furniture.
| Do not allow metal components to come in contact with water or cleaners as
it may cause rust and staining.
| Assemble on a soft, flat, clean, and dry surface.
Use a soft, protective barrier when assembling the furniture.
TIP: Use the box carton as a protective layer to separate and protect the
parts from scratches and other damage during assembly.
| Do not push or drag furniture as doing so may damage the unit.
Only move furniture when it is empty. Always ask for help when moving
furniture.
| Avoid Accidents – Do not climb, sit or stand on the furniture.
Do not allow children to play on or inside the furniture.
| Keep sharp objects away as they may scratch or damage the unit.
Do not use the furniture as a writing surface without a padded barrier.
IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
COMPONENTS
Tools Required (not included)
| |
---|---|---
Phillips Screwdriver| Rubber Mallet| Power Drill with 6mm Bit
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children and pets away during assembly.
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
| No. | Part Name | Qty. |
|---|---|---|
| 1 | Right Side Panel | 1 |
| 2 | Left Side Panel | 1 |
| 3 | Tabletop | 1 |
| 4 | Top Back Panel | 1 |
| 5 | Drawer Front | 3 |
| 6 | Drawer Side Panel (L/R) | 6 |
| 7 | Drawer Back | 3 |
| 8 | Drawer Bottom | 3 |
| 9 | Left Back Leg | 1 |
| 10 | Right Back Leg | 1 |
| 11 | Front Leg | 2 |
| 12 | Shelf | 1 |
| 13 | Divider | 2 |
| 14 | Traverse | 1 |
| 15 | Bottom Back Panel | 1 |
| No. | Hardware | |
| --- | --- | --- |
| A | Wood Dowel | |
| AZ | Hex Key | |
| B | Cam Screw | |
| BX | M3x12mm Flat Screw | |
| C | Cam Lock | |
| CZ | M4x25mm Wood Screw | |
| D | M3.5x14mm Flat Screw | |
| DE | M5x50mm Screw | |
| DF | M4x25mm Bolt | |
| DZ | M5x50mm Confirmat Screw | |
| FM | Screw Cap | |
| HE | Angle Bracket | |
| L | Wall Anchor | |
| L1 | Left Drawer Slide Track | |
| L2 | Left Drawer Slide | |
| P | M6x8mm Set Screw | |
| PX | Knob | |
| R1 | Right Drawer Slide Track | |
| R2 | Right Drawer Slide | |
| X | Plastic Foot | |
| Y | Sticker |
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are
installed correctly.
See drawings and tips below for proper installation.
Wood Dowel
Install wood dowels by gently tapping them into the designated hole using a rubber mallet.
Cam Screw Use a screwdriver to tighten the cam screw until the shoulder is flush with the panel. Do not over-tighten or under-tighten.
Cam Lock Align the cam lock opening (arrow) with the pre-drilled hole on the side of the panel. Use a screwdriver to adjust alignment as needed.
ASSEMBLY
WARNING: Check for pipes and electrical wiring before drilling.
IMPORTANT: The included wall anchor is suitable for drywall and masonry
walls. Select a drill bit that is suited for your wall material and is smaller
than the wall anchor; if the drill bit is too large, the tipover restraint
system will be faulty. If in doubt about installing the tipover restraint,
consult a certified professional.
Carefully measure and mark the location of pilot hole before drilling.
- Place the unit against the wall and mark the position for drilling the pilot hole.
- Move the unit away from the wall.
- Drill a pilot hole to the depth of the wall anchor.
- Insert the wall anchor, ensuring the opening is flush with the wall.
- Align the unit with the wall anchor and secure the unit to the wall using the included 50mm Screw.
SAFETY STATEMENTS & WARNINGS
- For residential use only. Not for commercial or industrial use.
- For indoor use only.
- Ensure all fittings are tight before use. Periodically check fittings to ensure they are tight.
- Only use this unit on a flat, level surface.
- Do not sit, stand or climb on the unit.
- Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
- Do not place liquids or hot items directly on the furniture.
- Never put a television on this product.
- Never use chemical cleaning products or polishes as doing so may damage the finish.
- Do not exceed the weight capacity of the furniture.
- Do not overload the shelf as doing so may cause it to sag.
- Do not overload the drawers as doing so may cause permanent damage.
- Do not place the unit in direct sunlight.
- Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
- Do not write on furniture without a padded barrier to protect the surface.
Any modification to the product or failure to follow recommended care will
void the product warranty.
If you experience issues with assembly or the product was damaged during
shipping, please contact our customer service team directly through one of the
methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response
time.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.
SunnydazeDecor.com
DM-222-IC
08/2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>