ReTech RTDCCAM21 Store Intelligence Camera User Manual
- June 15, 2024
- ReTech
Table of Contents
ReTech RTDCCAM21 Store Intelligence Camera
Specifications
- Product Name: RT-DC-CAM 2.1
- Camera Type: Wireless
- Camera LED Light: Indicates power status and mode
- Wi-Fi Connectivity: Yes
- Server Integration: Yes
- Capture Schedule: Configurable
- Battery Power Saving: Yes
- FCC Compliance: Yes
- Radiation Exposure Limits: Compliant with FCC guidelines
- Minimum Distance Requirement: 20cm between radiator and body
Product Usage Instructions
Camera Initiation
- Press the turn on/off button on the camera.
- The camera LED light will flash, indicating that the camera is turned on.
- To enter AP mode, press the button again.
- Connect your device to the camera’s Wi-Fi to change its settings.
- Wait for a few seconds to see if images captured by the camera are reflected on the Rebotics app.
Camera Routine Work
The server will send capture schedules to the camera, specifying when it
should automatically take a scan in the retail store. When the camera captures
images, they are received by the server for processing and reflection on the
Rebotics application. For example, you can set the camera to capture images
every day at 8 am and 4 pm.
Camera Capabilities to Deal with Disruption
Prior to the camera’s capture schedule, it is recommended to change the Wi-Fi
password. If the camera fails to connect to the new Wi-Fi network after three
attempts, it will automatically turn itself off (red light flashing). This
feature helps save battery power and prevents the camera from endlessly trying
to upload images without an internet connection. The camera will take a few
minutes for each trial.
FCC WARNINGS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, under part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used by the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2
Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
NOTE 3
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>