ReTech RT-DC-CAM 2.1 Intelligence Camera User Manual
- June 10, 2024
- ReTech
Table of Contents
RT-DC-CAM 2.1
User Manual
RT-DC-CAM 2.1 Intelligence Camera
a) Camera initiation
-
Press the turn on/off button, camera LED light flashes indicating the camera is turned on.
-
Press the button again to turn camera into AP mode, and connect to camera to change its Wi-Fi settings
-
Wait for a few seconds to see if images captured and reflected on “Rebotics” app
b) Camera routine work
- Server will send capture schedules to the camera, indicating when to take a scan automatically in the retailing store. When images received by the server, it will be processed and reflected on Rebotics application. For example, to capture everyday at 8 am and 4 pm.
c) Camera capabilities to deal with disruption
- Change Wi-Fi password before camera capture schedule, camera should turn itself off (red light flashing) after 3 times of trial. The feature is used to save battery power and prevent camera from trying to upload image without internet connection endlessly. 3 times of trial will take the camera a few minutes to do.
FCC WARNINGS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE 3: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>