Retech Labs RT001 CCTV Camera User Manual
- June 5, 2024
- Retech Labs
Table of Contents
Retech
Labs RT001 CCTV Camera
User Manual
RT001 CCTV Camera
a) Camera initiation
- Press the turn on/off button, camera yellow light flashes indicating the camera is turned on.
- Generate a QR code containing WiFi SSID and password information, and use the camera sensor to scan the QR code; when the network is configured, the camera will beep to confirm (sensor shall be around 10 to 15 centimeters away from the QR code when scanning)
- Wait for a few seconds to see if images are captured and reflected on the “Robotics” app
b) Camera routine work
- The server will send capture schedules to the camera, indicating when to take a scan automatically in the retail store. When images are received by the server, they will be processed and reflected on the Robotics application. For example, to capture every day at 8 am and 4 pm.
c) Camera capabilities to deal with disruption
- Change Wi-Fi password before camera capture schedule, camera should turn itself off (red light flashing) after 3 times trial. The feature is used to save battery power and prevent the camera from trying to upload images without an internet connection endlessly. 3 times trial will take the camera a few minutes to do.
FCC WARNINGS
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>