OREI UHD-IPC230-WPE 4K HDMI Extender Wall Plate Transmitter User Manual
- June 14, 2024
- OREI
Table of Contents
OREI UHD-IPC230-WPE 4K HDMI Extender Wall Plate Transmitter
Follow us on YouTube and Facebook
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive UHD-IPC230-WPE components that may be damaged
by electrical spikes, surges, electric shocks, lightning strikes, etc. Use of
surge protection systems is highly recommended to protect and extend the life
of your equipment.
Please Activate your warranty by registering our product through the link below – www.orei.com/register
Technical Support Need Help?
Our experienced Technical Support Team is here for you to answer your
questions, give technical advice or help troubleshoot your project to get you
installed on time and on budget. Call, email or chat with us now.
OREi Live Technical Support Hours
US team (US/Canada/Mexico): Monday-Friday, 9 a.m. – 6 p.m. Central Time
Support Email – info@orei.com I Support Number –
877-290-5530 Or Chat Live on
www.orei.com Send us an instant message now. Our
Technical Support Team will respond momentarily. Available during live support
hours.
- The extender needs to follow the direct interconnection method CAT cable.
- The extender will go into protection mode automatically and no video out when using the cross interconnection method CAT cable.
Introduction
UHD-IPC230-WPE is a 4K@60Hz 78Gbps 4:4:4 HDR HDMI Wall Plate Extender Over 70M Cat6, with zero latency and visually lossless compression transmission. It supports PoC, IR control, 3.5mm audio output, etc. This kit is a reliable, ultra-high-definition video transmission solution, which is widely used in security monitoring, home theatre, broadcasting and other fields.
Features
- Zero-latency transmission.
- The transmitter is a wall socket design and can be embedded in the wall.
- Extend 4K@60Hz HDMI signal up to 70m/230ft over Cat6/6A/7 cable.
- Support HDRl0.
- Support EDID passthrough and auto downscaling.
- Support IR control (20~60KHz) of equipment at TX end from RX end.
- Support Power-over-Cable (PoC), the receiver can be powered by the transmitter.
- The receiver supports 3.5mm stereo output.
- Lightning protection, surge protection, ESD protection.
Package Contents
- l x Transmitter
- l x Receiver
- l x User Manual
- l x IR receiver cable
- l x IR blaster cable
- 2 x Mounting ear
- 6 xScrew
- 1 x US Standard 4*2 (inch) concealed box
- 2 x Screw TM3#*74
Specifications
| Items | Transmitter | Receiver |
|---|
Video
Input interface| lx HDMI Type A Female| lx RJ45 Female
Output interface| lx RJ45 Female| lx HDMI Type A Female
HDMI cable| s: Sm| s: Sm
Maximum transfer
rate
| ****
l8Gbps
Maximum transmission bandwidth| ****
600MHz
EDID passthrough| Support
Compatibility
| HDMI 2.0 ( Deep color, 4K, HOR, YUV4A4)
HDCP 2.2, HDCPl.4
Resolutions
| 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz,
720p@50/60Hz, l 080i@50/60H,z l080p@50/60Hz,
3840×2160@24/25/30/50/60Hz, 4096×2160@24/25Hz, l280x960, l280x800, l280x768, l680xl050, l360x768, l366x768, l600x900, l024x768, 800×600,
l920xl200
Transmission
distance
| ****
CAT6/6A(7s70m
Audio
Input interface| lx HDMI Type A Female| N/A
Output interface| | lx HDMI Type A Female lx 3.5mm L/R Female
Audio formats| LPCM/DTS -HD/DTS -Audio/Dolby Digital 5.lCH/Dolby Atmos
Command Signal
IR interface| lx 3.5mm IR OUT Female| lx 3.5mm IR IN Female
---|---|---
Receiving range| s: Sm
Infrared frequency| 20KHz-60KHz
Power
Power Supply| ACll0-240V| Poe (Powerd by TX)
Power Consumption| ****
Tx + Rx < **7W**
Operating Environment
Working
temperature
| ****
O ‘C -60 ‘C
Storage temperature| ****
-30 ‘C- 70 C
Humidity| 0-90 %RH ( No condensation)
Physical Properties
Housing| Aluminium al l oy + Iron
Weight| 270g| 140g
Colour| Black
Dimensions
| TX: 70.0(L)’ll4.0(W)’5l.O(H) mm
RX: 85.5(L)’75.5(W)’l6.5(H)mm
Protection
| ESD protection
la Contact discharge level 2 (±4KV)
lb Air discharge level 3 (±SKV) Implementation of the standard: IEC61000-4-2
Lightning protection, Surge protection
Certifications| FCC/CE/Ro HS
Operation Controls and Functions
Transmitter
- IROut: Connect with IR blaster extension cable
- HDMI Input: Connect with HDMI source device with HDMI cable
- Power Indicator: When there is power, the indicator will light solid blue
- Reset Button : Press to restart the device
- HDMI Indicator: When there is no HDMI signal, the indicator will flash, when there is an HDMI signal, the indicator will light solid blue
- Power: Connect AC ll0-240V power supply
- RJ45 Output: Connect with CAT6/6A/7 network cable
Receiver
- Reset button: Press to restart the device
- RJ45 input: Connect with CAT6/6A/7 network cable
- IR in: Connect with IR receiver extension cable
- Power indicator: When there is power and no HDMI signal, the indicator will flash, when there is an HDMI signal, the indicator will light up solid
- DCSV: Connect with DC SV/IA power adapter
- HDMI output: Connect with HDMI display device with HDMI cable
- 3.5mm stereo output: Connect with earphones or speaker
Connection Diagram
Description
Connection Diagrams
Documents / Resources
| OREI
UHD-IPC230-WPE 4K HDMI Extender Wall Plate
Transmitter
[pdf] User Manual
UHD-IPC230-WPE 4K HDMI Extender Wall Plate Transmitter, UHD-IPC230-WPE, 4K
HDMI Extender Wall Plate Transmitter, HDMI Extender Wall Plate Transmitter,
Extender Wall Plate Transmitter, Wall Plate Transmitter, Plate Transmitter,
Transmitter, Transmitter UHD-IPC230-WPE
---|---