V-TAC VT-035 T5 Intergrated Fitting Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
V-TAC VT-035 T5 Intergrated Fitting
TECHNICAL DATA
Model
| Watts| Lumens| CRI| Beam Angle| Body Type| Long
Life| On/Off Cycles| Dimension| Input Power
---|---|---|---|---|---|---|---|---|---
VT-035
| 4W| 360| >80| 120| PC| 30,000 Hours| >15000| 320×22.8x30mm|
AC:220-240V,50Hz
VT-065
| 7W| 630| >80| 120| PC| 30,000 Hours| >15000| 580×22.8x30mm|
AC:220-240V,50Hz
VT-125
| 16W| 1440| >80| 120| PC| 30,000 Hours| >15000| 1180×22.8x30mm|
AC:220-240V,50Hz
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard
- Install only by certified Electrician.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24
Hours a day would void the warranty. This product is warranted for
manufacturing defects only.
INSTALLATION REQUIREMENTS
- Installation only by certified electrician
- Operation environment temperature: from -20°C to +45°C
- Do NOT use DC electricity
INSTALLATION INSTRUCTIONS
A. Turn OFF electricity before starting!
B. Follow diagram below:
PACKING
- T5 Integrated Fixture (1PC)
- Mounting Clips
- Quick connecting double head wire
- Screws
MOUNTING INSTALLATION DIAGRAM
-
Quick Connecting wire with double head.
-
Using wire clipper cut off one end of the connecting wire. Ensure to strip the wire upto 5mm
-
Plug the connecting wire into the fixture as shown below
-
Power the end of connecting wire which was cut to input power source.
-
Linkable T5 tube allows you to connect two lights together.
-
Easy Connecting wire allows flexibility of installing the T5 fixture for corner installation as well as linear installation.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE,
INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE
LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Documents / Resources
|
V-TAC VT-035 T5 Intergrated
Fitting
[pdf] Instruction Manual
VT-035 T5 Intergrated Fitting, VT-035, T5 Intergrated Fitting, Intergrated
Fitting, Fitting
---|---