Begode 134V Extreme Bull Commander Mini Instruction Manual
- June 15, 2024
- BEGODE
Table of Contents
Begode 134V Extreme Bull Commander Mini
Product Information
- Specifications:
- Client: EWHEELS LLC
- Supplier: Begode Factory: Begode
- Product: Unicycles
- P.O. No.: P.O.
- Quantity: 30+15 sets
- Item No.: Commander mini, Commander Pro 50s
- Inspection Date: 2023/12/18
- Location: Dongguan, Guangdong, China
- Inspector: Henry Xiao
Product Usage Instructions
- Step 1: Charging the Battery
- Connect the charger to the power outlet.
- Plug the charger into the charging port of the unicycle.
- Wait for the battery to charge fully. The battery voltage should reach (134.4V)+/-0.5V.
- Step 2: Assembling the Unicycle
- Note: The assembling instruction manual is not included in the packaging. Please follow the instructions below:
- Take out all the components from the packaging.
- Attach the pedals to the unicycle frame using the provided screws.
- Tighten the screws securely using a screwdriver.
- Step 3: Checking Motor Functionality
- Note: It is important to check for any scraping noises from the motor.
- Turn on the unicycle.
- Listen for any scraping noises coming from the motor.
- If scraping noises are present, contact customer support for further assistance.
- FAQ:
- Q: What should I do if the battery voltage does not reach the required level?
- A: If the battery voltage does not reach (134.4V)+/-0.5V after fully charging, don’t hesitate to get in touch with customer support for troubleshooting steps or a replacement.
- Q: What should I do if I hear scraping noises from the motor?
- A: If you hear scraping noises from the motor, please get in touch with customer support for further assistance. Do not attempt to use the unicycle with a faulty motor.
INSPECTION REPORT
1. INSPECTION INFORMATION|
---|---
Client:| EWHEELS LLC|
Supplier:| Begode
Factory:| Begode
Product:| Unicycles
P.O. No.:| –
P.O. Quantity:| 30+15sets
Item No.:| Commander mini, Commander Pro 50s
Inspection Date:| 2023/12/18
Location:| Dongguan, Guangdong, China
Inspector:| Henry Xiao
2. INSPECTION RESULT|
---|---
Category| Confirm| Not Conform| Pending| Check Points
Workmanship/Function| Ö| | |
OVERALL CONCLUSION| CONFIRM
---|---
Approved by: Sunny Cai
REMARK POINT
This reflects our findings at the time and place of inspection. This inspection has been carried out to the best of our knowledge and ability and our responsibility is limited to the exercise of reasonable one. This report does not relieve the sellers from their contractual obligations nor prejudice the buyer’s right to compensation for any apparent and hidden defects not detected during our random inspection or occurring thereafter. This report does not evidence of shipment.
- Service Pre-shipment Inspection
- Report No. V-2312119
- Date Issued 2023-12-19 P 1 / 31