AX WABER AX05TB02 Dual Monitor Stand Vertical Stack Screen Instructions

AX05TB02 Dual Monitor Stand Vertical Stack Screen

Specifications

• Product Name: Computer Monitor Stand
• Model : AX05TB02
• VESA Compatibility : 50mm/75mm/100mm

Parts Included

The following parts are included in the package

• 1 x Part 1
• 2 x Part 2
• 1 x Part 3
• 4 x Part C1
• 2 x Part D
• 4 x Part E1
• 2 x Part A
• 3 x Part C2
• 1 x Part E2

**Assembly Instructions

**

Please follow these steps to assemble the computer monitor stand:

1. Step 1: Attaching Part E1 and Part 6
   As shown in the pictures, insert Part E1 into Part 6. Ensure that the direction of these spare parts is correct.

2. Step 2: Attaching Part 2 and Part 3
   Once Part E1 and Part 6 are connected, you can put Part 2 and Part 3 together. Make sure they are aligned properly.

3. Step 3: Attaching Part 5 to the Bottom Post
   As shown in the figure, slip Part 5 into the interface of the bottom post. Use screws (M8*25) to secure it in place.

4. Step 4: Installing the TV
   Choose the right screws for your TV from the included TV installation bag. Refer to the TV’s user manual for the appropriate screw size. Use the provided plastic parts and washers as needed for proper installation.

5. Step 5: Adjusting the Monitor Angle
   Use the height adjustable gear and tilt tube to adjust the monitor angle according to your preference.

CUSTOMER SERVICE CENTER : Aa20220905@outlook.com

COMPUTER MONITOR STAND

AX05TB02

PART LIST

Instructions

1. 

2. 

3. 4. We try my best to offer the gratis TV installation bag which is suitable for the whole of TV model in USA, in fact as you know there are so many kinds of TV catalog please accept my apology in case your TV can’t match it successfully.

4. See the picture ,first put into the groove of part no post then fasten down.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>