KSADBOSSBO CS09 Body Camera Instruction Manual

KSADBOSSBO CS09 Body Camera

Specifications

• HD lens: 1
• Fill light: 2
• Display screen: 3
• Upturn: 4
• Back: 5
• Album: 6
• Confirm: 7
• Downturn: 8
• Loudspeaker: 9
• Charge lamp: 10
• Microphone hole: 11
• Video: 12
• Back splint: 13
• Photo/fill light: 14/15
• Power/screen sleep: 16
• Turn/WiFi switch: 17
• TF card groove: 18
• Reset : 19

INSTRUCTION MANUAL

Please read the user manual carefully before using the product and keep it properly

Product illustrations

1. HD lens
2. Fill light
3. Display screen
4. Upturn
5. Back
6. Album
7. Confirm
8. Downturn
9. Loudspeaker
10. Charge lamp
11. Microphone hole
12. Video
13. Back splint
14. Photo/fill light
15. Power/screen sleep
16. Turn/WiFi switch
17. TF card groove
18. Reset
19. Data interface

Introduction to interface icons

1. RECORD MODE
2. Recording is turned on
3. Time
4. Battery capacity
5. Resolution ratio
6. WiFi on
7. TF hint
8. Date
9. Turn on time-lapse recording

Use-pattern

The lens of this product can be rotated for 180 ° and the angle can be adjusted according to requirements during use, as shown in the figure:

Install TF card

• Insert the TF card as shown in the figure.
• Please use a genuine TF card.
• Support 4-256G, C10 high-speed card.

Tip: When inserting the TF card into this product, it will prompt  formatting. If there are important files in the card, firstly please back up them to another device before using them.

Application tutorial

Introduction by function

2.Basic operating instructions

1. Power on
   In the shutdown state, long press ON OF to power on and the display screen will light up and a prompt sound will be heard.

2. Shutdown
   In any mode, long press ON OF for shutdown and the display screen will be off (Wi-Fi mode shutdown requires exiting the app).

3. Recording
   In the RECORD MODE, short press ” ” to start recording. Ire cording mode, short press ” to stop recording and save the current recording file Contraction recording of the Time-lapse recording is GAP）.

4. Photo
   In the RECORD MODE or recording mode, short press “ to take one photo at a time and save the current photo file.

5. LED fill light on/off
   Long press in video mode to turn on LED light. Long press  again to turn off LED light.

6. (6) Rotating shot:
   The default orientation of the image is the back clip. Please adjust the lens firstly if you need rotating shot and then short press ” to adjust the photo.

7. Screen sleep
   In any mode of power-on, short press ON OF ” to quickly turn off the screen; short press any button in the off state to light up the display screen.

8. Video playing
   In standby mode, short press **to enter into album and select a video directory in the album. Short press to select the required video file. Short press OK to play video. During video playback, long press to volume up. Short press  to quickly switch video files. Short press “ ” to return to the previous step or exit.
   **

9. View picture:
   In standby mode, short press ” **to enter into album to select a picture directory in the album. Short press to select the required picture file. Short press OK** to view pictures. Short press to quickly switch picture files. Short press to return to the previous step or exit.

10. Delete file
    Selecting files to be deleted when browsing videos or pictures in the album directory Long press the  key to enter the deletion the Confirm deletion by briefly pressing the  OK key

11. Setting
    In standby mode, short press OK to enter into setting  In the setup menu, short press  to choose. Short press OK to set and modify various parameters. Short press to return to the previous step or exit.

12. Time setting
    In standby mode, short press OK to enter into setting. In the setup menu, select ‘Time Settings’ and enter to set the time.

If the machine crashes and cannot be used normally, press to reset the machine and it can be used normally after resetting.

Tip : The functions such as shrink recording, delay recording, and delay photography need to be turned on in the settings. After turning on, return to standby mode and use the button operation function

APP download

Scan the QR code below to download and install “Verdure”, or search for “Verdure” in Google Play or App Store to download and install.

Hotspot Wi- Fi

1. Wi-Fi switch: In standby mode, long press   to turn on WIFI. Long press  again to turn off  can not be closed in the real-time preview state of the app. To close Wi-Fi, please exit the app firstly and then manually close Wi-Fi. )

2. Wi-Fi connection: Search for a network with a connection name starting with CS (such as CS09_88AB) in the Wi-Fi settings of phone or flat computer and the password is 12345678.After successful connection open the “6 frame recording App” to enter the main interface point enter the real-time preview interface.

3.  APP operation, photo and recording: Preview the interface and click to start recording. In recording mode, click to stop recording and save the current recording file. Click to take a photo and save the current one

4. Recorder file download: Preview the interface and select “. Click “Loop video” (download and select images; captured events will be automatically downloaded). Open the video file that needs to be downloaded and click at the bottom left to enter into the
   download state (High resolution, long video segments, slow download speed).

5. Recorder settings: Preview the interface and click to set the recorder. Some functions and parameters of the machine can be set through the APP.

Connect computer

Directly connect to the computer in any mode and use it as a USB flash disk. You can freely copy, clip, delete, and format files.

Charging instructions
Please refer to the diagram for battery capacity:

Charging: This device is equipped with a built-in rechargeable lithium battery. When using this device for the first time, please charge it in advance. The indicator light remains on during charging, and it turns off when fully charged. You can charge it through the following methods:

• Connect the computer to charge it and use USB to connect it to the computer.
• Use a power adapter or mobile power source to charge it.
• Recharging it after each use of the battery. It should be recharged for approximately 3 hours (the charging time depends on the adapter). After it is fully charged, please charge it for another 20 minutes to ensure that the battery is fully charged.

Suggestion : Try not to use the function during charging as it may cause damage to the battery and TF card!

Relevant parameters

Common questions of customers and answers

• Problem: The display screen of the product shows a stop screen and any operation pressed is invalid or has no response.
• Answer: The product does not respond due to possible operational errors in daily operation. You need to Short press ” ” to reset the machine so that it can be used normally
• Question: How can I enter the menu screen and set parameters?
• Answer: After the machine is turned on, it is under the video standby mode. Long press to enter the setup menu.
• Question: Why does the display suddenly turn black under the work state?
• Answer: By default, if the machine does not operate for 1 minute, the screen will automatically sleep and you can short press ” enter the screen sleep mode at any time.
• Question: A lag appears when App previews the image in real time and the video is jammed and intermittent when the App plays back.
  Answer: The Wi-Fi distance between machine hotspots is 5 meters. There will be a phenomenon of stuttering and disconnection beyond 10 this distance. When playing back TF card videos, please download the files firstly and then play it back. When downloading, try to keep the machine and phone as close as possible.

Note

Usage scene
Please strictly abide by relevant laws of the country where the product is used, and do not use this product for any illegal purpose, otherwise, you should bear the consequences.

Operating temperature
Please use the product at the natural temperature and do not use it in temperature where human body can not adapt to.

Working humidity
Please use it in the suitable humidity of human environment and do not put the product in a humid working environment. This product does not have waterproof function, so please avoid water or exposure to rain.

Shooting requirements
Please use the product in an environment with sufficient light sources and do not direct the camera at the sun and other strong light sources so as to avoid damage to optical devices.

Cleaning requirements
Do not use the product in an environment with too large dust density so as to avoid the lens and other components contaminated with dust, which will affect the camera effect. (If the lens has fingerprints or dust, please use clean soft material dust-free cloth to wipe it).

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions

1. this de vice may not cause harmful interference.
2.  this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer nce to radio comm. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>