Wenhui WHM06 Wireless Doorbell User Manual

Wenhui WHM06 Wireless Doorbell

Product Information

Specifications

• Product Description: Wireless Doorbell
• Product Features: Wireless signal transmission, no wiring required. Simple installation. Green and environmental protection. Minimalist design, simple and elegant appearance. Suitable for doorbells, switches, pagers, etc.
• Transmitter A Parameters:
  • Working Voltage: DC 3V
  • Transmit Power: <10mW
  • Battery Model: CR2032 3V
  • Dimensions: 41x70x16mm
• Transmitter B Parameters:
  • Working Voltage: DC 12V
  • Transmit Power: <10mW
  • Battery Model: 23A 12V
• Receiver A Parameters:
  • Working Voltage: AC 100-250V 50Hz/60Hz
  • Operating Frequency: 433.92MHz
  • Power Consumption: 0.5W
  • Volume: 25-105dB
  • Music: 38 Music options
  • Receiver Size: 67x101x(50~70)mm
• Receiver B Size: 80x54x(50~70)mm
• Receiver C Size: 66x55x(50~70)mm

Product Usage Instructions

Pairing
The packaged products are paired before leaving the factory and do not need to be paired again. To replace transmitters or add transmitters, follow these steps:

1. Plug the receiver socket into a regular household socket.
2. In the power-on state, if you need different transmitters to correspond to different ringtones, first press the music button to select music.
3. Long press the receiver pairing button for about 5 seconds until the indicator light flashes, entering the pairing mode.
4. Press the transmitter, and the receiver will ring to indicate successful pairing.

Clearing Pairing Codes
To clear all pairing codes, press and hold the receiver pairing button for about 10-13 seconds until the indicator light rapidly flashes and then stops flashing.

Installation
The transmitter can be placed or moved at will and can also be fixed to your preferred location. Follow these steps to fix it:

1. Tear off the double-sided tape and stick it on the back of the transmitter, press firmly.
2. Tear off the double-sided tape on the other side, choose the installation location of the transmitter, and wipe it clean (avoid getting close to iron and metal objects as they may affect the wireless signal).
3. Press it on the wall for more than 30 seconds and fix it firmly.
4. Plug the receiver into a common household socket.
5. Press the music button of the receiver to select the appropriate music.

Note:
Please remove the battery insulation sheet before performing the installation steps.

Special Note:
Please avoid installing the transmitter on metal objects (iron doors, iron windows, etc.) as it may affect the transmission distance. Test it before fixing it.

Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

FAQ (Frequently Asked Questions)

• Q: What is the wireless transmission range of the doorbell?
• A: The outdoor open space range is between 100-300 meters. Please note that the actual distance may vary depending on the use environment and the presence of obstacles.
• Q: How many music options are available?
• A: There are 38 songs to choose from.
• Q: Is the transmitter waterproof?
• A: Transmitter A has an IP44 waterproof rating.
• Q: Can I adjust the volume of the receiver?
• A: Yes, the receiver has a 3-level volume adjustment ranging from 25-105 dB.

Product Description:

Product features: wireless doorbell, drive wireless signal by pressing, no wiring, simple installation, green and environmental protection. The appearance adopts a minimalist design, simple and elegant, round and beautiful in appearance. It is not only used for doorbells, but also for switches, pagers, etc. various fields.

1. Wireless transmission, no wiring required

2. Outdoor open space is between 100-300 meters
   Note : This is the test distance, the actual distance varies depending on the use environment, the more obstacles, the shorter the distance

3. 3-level volume adjustable

4. 38 songs to choose from

5. Transmitter IP44 waterproof rating

6. Learning code function

Technical parameter

(Please correspond to the specific model)

Receiver A parameters
Receiver parameters

• Working voltage: AC 100-250V 50Hz/ 60Hz
• Operating frequency: 433.92MHz
• Power consumption: <0.5W
• Volume: 25-105dB
• Music: 38 Music
• Receiver A size: 67x101x50~70)mm
• Receiver B size: 80×54(50~70)mm
• Receiver C size: 66x55x(50~70)mm

Transmitter A parameters

• Working voltage: DC 3V
• Transmit power: < 10mW
• Battery model: CR2032 3V
• Dimensions: 41x70x16mm

Transmitter B parameters

• Working voltage: DC 12V
• Transmit power: <10mW
• Battery model: 23A 12V

Instructions
The packaged products are paired before leaving the factory and do not need to be paired again. To replace transmitters or add transmitters,  do the following:

Pairing method
The receiver socket is plugged into a regular household socket. In the power- on state, (if you need different transmitters to correspond to different ringtones, first press the music button to select music) and then long press the receiver pairing button for about 5 seconds until the indicator light flashes, enter the pairing mode, at this time, press the transmitter, the receiver rings, and the pairing is successful.

Clear code
Press and hold the receiver pairing button for about 10-13 seconds until the indicator light flashes rapidly and then stops flashing, that is, all pairing codes are cleared.

Installation method

The transmitter can be placed or moved at will, and can also be fixed to your preferred location. Before fixing, please put it in the required fixing position to try it out, it will not affect normal use, and then fix it. Fixed as follows:

Note : Please remove the battery insulation sheet before performing the following steps

1. Tear off the double-sided tape and stick it on the back of the transmitter, press firmly
2. Tear off the double-sided tape on the other side, choose the installation location of the transmitter and wipe it clean (try not to get close to iron and metal objects, metal objects will affect the wireless signal), press it on the wall for more than 30 seconds and fix it firmly
3. Plug the receiver into a common household socket
4. Press the music button of the receiver to select the appropriate music

Special Note:
Please avoid installing it on metal objects (iron doors, iron windows, etc.), so as not to affect the launch distance. Please try it out before fixing it.

Troubleshooting

1. The doorbell does not ring: Check whether the receiver is plugged in and the socket is powered.
2. Short transmission distance: metal objects such as iron gates, iron gates, and iron frames will affect the effective transmission distance. Avoid placing the transmitter and receiver near metal objects, walls, and ceilings also affects the transmission distance. Interference from other wireless devices, etc.
3. Please check the battery level in time to replace the battery when the indicator light of the transmitter type A is dark. so as not to affect the launch distance.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>