Wenhui WGH-001 Voice Feedback Headset User Manual
- June 15, 2024
- Wenhui
Table of Contents
Wenhui WGH-001 Voice Feedback Headset
Product Information
- Specifications
- Earphone model: YYLX-WHS08
- Paired Name: WGH-01
- Bluetooth version: 5.3
- Supported protocols: A2DP, AVRCP, HSP, HFP
- Effective distance: 10 meters
- Audio encoding: SBC, AAC
- Sound channel system: Stereo sound
- Frequency response: 20Hz-20KHz
- Horn diameter: 40mm
- Horn resistance: 32
- Charging time: 1.5-2 hours
- Charging interface: Type-C
- Charging input: 5V1A
Product Usage Instructions
- Power On:
- To power on the earphones, press and hold the play/pause button for 2 seconds.
- Pairing and Connecting:
- When the headphones are turned on, they automatically enter pairing mode and the indicator light flashes alternately red and blue. To pair and connect the headphones:
- Open the Bluetooth settings on your phone.
- Search for “WGH-01” and click to connect.
- The indicator light will turn off, and you will hear a prompt tone “Phone connected”.
- Music Playback:
- To control music playback, use the following buttons:
- Play/Pause: Click the play/pause button.
- Next Track: Long press and hold the volume + button.
- Previous Track: Long press and hold the volume – button.
- Volume Up: Click on the volume + button.
- Volume Decrease: Click on the volume – button.
- Call Function:
- To answer a call, short press the play/pause button. To hang up the phone, short press the play/pause button. To reject a call, long press the play/pause button.
- Ear Return Function:
- Note: To use the ear return function, an external microphone must be plugged in first.
- To open ear return: Press and hold the ear return switch, and you will hear a prompt sound “Ear return open”.
- To close ear return: Press and hold the ear return switch, and you will hear a prompt sound “Ear return closed”.
- To adjust ear return volume: Click the ear return button once to cycle through three levels of volume: high, medium, and low.
- Wired Mode:
- To use the earphones in wired mode, simply plug in a 3.5mm audio cable to connect to the device, using the same method as wired headphones.
- Charging:
- To charge the earphones, insert the charging cable directly into the Type-C socket.
- FAQ:
- Q: How do I connect the earphones to two devices simultaneously?
- A: Follow these steps:
- After the headphones are successfully connected to the first device, turn off the Bluetooth function of the first device.
- The headphones will automatically enter pairing mode.
- Turn on the Bluetooth function of the second device and search for the Bluetooth name of the earphones.
- Select the Bluetooth name, click pairing, and connect to the second device.
- Open the first device and click on the Bluetooth name to connect.
- Q: How do I turn on/off the ear return function?
- A: To open the ear return function, press and hold the ear return switch. You will hear a prompt sound “Ear return open”. To close the ear return function, press and hold the ear return switch. You will hear a prompt sound “Ear return closed”.
Technical parameter
- Earphone model: YYLX-WHS08
- Paired Name: WGH-01
- Bluetooth version: 5.3
- Supported protocols: A2DP, AVRCP, HSP, HFP
- Effective distance: ≥ 10 meters
- Audio encoding: SBC, AAC
- Sound channel system: stereo sound
- Frequency response: 20Hz-20KHz
- Horn diameter: 40mm
- Horn resistance: 32 Ω
- Charging time: 1.5-2 hours
- Charging interface: Type-c
- Charging input: 5V1A
INSTALLATION
- Power on
- Play/pause/long press for 2 seconds to turn on, long press for 3 seconds to turn off.
- Pairing and connecting
- When the headphones are turned on, they automatically enter pairing mode, and the indicator light flashes alternately red and blue.
- Open the Bluetooth of the phone to search for “WGH-01” and click to connect.
- After successful connection, the indicator light turns off. Prompt tone ‘Phone connected’.
- Pairing and connecting
- Music playback: Click the play button
- Music pause: Click the play button
- Next track: Long press and hold the volume“ +”
- Previous song: Long press and hold the volume “-“
- Volume up: Click on the volume ‘+’
- Volume decrease: Click on volume ‘-‘
- Call function
- Answer a call: Short press the play button
- Hang up the phone: Short press the play button
- Reject call: Long press the play button
- Ear return function
- Note: To use the ear return function, an external microphone must be plugged in first;
- Open ear return: Press and hold the ear return switch, and the prompt sound “ear return open”;
- Close ear return: Press and hold the ear return switch, and the prompt will sound “ear return closed”.
- Ear return volume adjustment: Click the ear return button once to adjust the volume level. There are three levels of ear return volume: high, medium, and low
- Wired mode
- Just plug in a 3.5mm audio cable to connect to the device, using the same method as wired headphones.
- Charging
- Insert the charging cable directly into the Type-C socket for charging.
Function List
Function List Basic Functions
Function List · Link Back
Function List · Charging
FCC
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.