Shenzhen Wenhui Technology Development WHD02 Smart Switch Socket User Guide
- June 6, 2024
- Shenzhen Wenhui Technology Development
Table of Contents
Wenhui Technology Development WHD02 Smart Switch Socket
User Guide
Smart switch socket
Model: WHD02
Parameter:
- Input: AC 100-240V 50/60Hz 16A Max
- Output: AC 100-240V 50/60Hz 16A Max
- Wi-Fi: IEEE 802.11 b/g/n 2.4GHz
- Material: PC V0
- Size: 41x20x41mm
Checklist before using the device
- Your smartphone or tablet has connected to a 2.4G WiFi with the internet.
- You have the correct WiFi password.
- Your smartphone or tablet must have access to APP Store, Google Play.
- Make sure that your router is MAC-open.
User Guide
-
Start with the “Smart Life” APP.
-
Register a Smart Life account.
-
If you have a Smart Life account, just log in.
Please wire the device according to the marking on the cover.
ON/OFF operating principle:
The connected appliances work/stop through live wire power on/off. The device
must be powered by L and N
Warning: S1 and S2 can only be connected to the two ends of the wall, and
cannot be connected to strong power such as a zero-fire line.
4.1 The wiring diagram to connect the electrical appliance.
4.2 The wiring diagram to connect the light.
Power on after completion of wiring and the device is turned on by default,
press and hold the button for about 5s seconds until the WiFil blue LED blinks
fast.
Enter the App, tap “+” in the upper right of the page to enter network
connection page.
Please make sure the device’s indicator light rapidly flashes (2 times per
second) tap to go on to the next step.
Input your WiFi & password.
Name your device.
When the WiFi LED is on , the device is online. Start to control now!
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.