Instant DTH-186 Digital Meat Thermometer Instruction Manual

June 15, 2024
Instant

Instant DTH-186 Digital Meat Thermometer

Instant DTH-186 Digital Meat Thermometer

SPECIFICATION

  • Range: -50 to 300°C(-58 to 572°F)
  • Resolution: 0.1°C / 0.1°F
  • Accuracy: ±0.8°C (0 to 150°C/32°F to 302°F); ±2~3°C in other ranges
  • Waterproof Level: IP X 6
  • Reaction time: below 95°C/203°F, ≤3 seconds
  • Positive LCD display with backlight.
  • About 10 minutes no operation, automatic shutdown
  • Power: 1 X CR 2032 3.0 V
  • Auto-rotating display

OPERATION GUIDE

  • POWER ON
    When the probe is opened about 60 degrees from folded state, the thermometer will turn on automatically. When the thermometer is in power off state, Press the “①” button to turn on.

  • MEASUREMENT
    Insert the probe head into the object, with a depth of more than 10 mm, Then you can get the value when it is stable. Wipe the probe with wet cloth after measurement.

  • °C/°F
    When the thermometer is in power on state, Press the “①” button to switch between Celsius and Fahrenheit.

  • HOLD
    During the measurement, Press the “②” button once, the “ ” icon will display on the LCD screen, the measurement value will be locked for 5 seconds.

  • BACKLIGHT
    Press “③” button to turn on the backlight for 10 seconds.

  • POWER OFF
    After the measurement, Turn the probe about 30 degrees from the horizontal state the thermometer will turn off.
    To save power, The thermometer will power off automatically when it has been lain idle about 10 minutes. Press “①” button for 3 seconds, the thermometer will turn off.

  • CALIBRATION
    When the thermometer is in power on state, Insert probe into a mixture of ice and water, Press “②” button for 3 seconds, the thermometer will be calibrated to 0°C.
    Operation Guide
    Operation Guide

WARNING!

  • The probe cannot continuously test the temperature higher than 120°C for more than 30 minutes.
  • Do not touch the hot probe by bare hand.
  • Try to avoid directly immersing the thermometer in water for cleaning.
  • Probe disinfection: Put the metal probe into boiling water for 3 minutes to disinfect.
  • Power off it and put it away from children after use.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals