Launch CRP123 Professional Diagnostics Tool User Manual

Launch CRP123 Professional Diagnostics Tool

Product Information

Specifications

• Supported Languages: English, French, Spanish, German, Russian, Japanese, Portuguese, Italian, Traditional Chinese, Polish
• Compatibility: OBD2 cars

Product Usage Instructions

Downloading the LAUNCH CRP123 PLUS lib file
To download the LAUNCH CRP123 PLUS lib file, follow these steps:

1. Visit the following link: https://eninfo.x431.com/prod_view.aspx?TypeId=68&Id=191
2. Click on the download link provided on the page.

Registering & Updating LAUNCH CRP123 PLUS
To register and update the LAUNCH CRP123 PLUS, follow these steps

1. Copy the register password of the machine from the product Help – tool information section.
2. Go to http://www.x431.com/CRP123PLUS and click on the update icon.
3. Remove the TF card from the machine after installing the client.
4. Insert the TF card into a card reader and connect it to the computer.
5. Open the installed client and enter the product serial number (located on the back of the tool) and select Device upgrade.
6. Enter the Serial Number and click update. Fill in your email and the register password copied before, then submit it.
7. The upgrade screen will be displayed. Select the software and language to be upgraded and click Download to start the upgrade.
8. After downloading, install the card back into the machine. Upon startup, it will prompt you to upgrade.

Restoring the Factory Settings
To restore the factory settings of the LAUNCH CRP123 PLUS, follow these steps

1. Open the installed client and select Restore System.
2. Select the corresponding product model CRP123 PLUS to start the restore.
3. After the restore, put the TF card back into the machine for initialization. Note that the machine cannot be used during initialization.
4. After initialization, put the TF card back on the computer to complete the Device upgrade process before it can be used normally.

FAQs

Where to download the LAUNCH CRP123 PLUS lib file?
You can download the LAUNCH CRP123 PLUS lib file from this link:https://eninfo.x431.com/prod_view.aspx?TypeId=68&Id=191

How to Register & Update LAUNCH CRP123 PLUS?
To register and update the LAUNCH CRP123 PLUS, follow these steps:

1. Copy the register password of the machine from the product Help – tool information section.
2. Go to http://www.x431.com/CRP123 PLUS and click on the update icon.
3. Remove the TF card from the machine after installing the client.
4. Insert the TF card into a card reader and connect it to the computer.
5. Open the installed client and enter the product serial number (located on the back of the tool) and select Device upgrade.
6. Enter the Serial Number and click update. Fill in your email and the register password copied before, then submit it.
7. The upgrade screen will be displayed. Select the software and language to be upgraded and click Download to start the upgrade.
8. After downloading, install the card back into the machine. Upon startup, it will prompt you to upgrade.

What should I do if there are some problems with the product software?
If there are problems with the product software such as stalling, failure to start, or missing LIB files, you can restore the factory settings to solve these problems. Follow these steps:

1. Open the installed client and select Restore System.
2. Select the corresponding product model CRP123 PLUS to start the restore.
3. After the restore, put the TF card back into the machine for initialization. Note that the machine cannot be used during initialization.
4. After initialization, put the TF card back on the computer to complete the Device upgrade process before it can be used normally

• How many languages does CRP123 PLUS support?
  The LAUNCH CRP123 PLUS supports 10 languages including English, French, Spanish, German, Russian, Japanese, Portuguese, Italian, Traditional Chinese, Polish. You can choose whichever language is best for you.

• What if LAUNCH CRP123 PLUS can’t read ABS code?
  If the LAUNCH CRP123 PLUS cannot read ABS codes, please send the order and product serial number, along with your car model and year or VIN number to us. We will assist you in solving the problem. Please contact us at [email protected].

• What if the LAUNCH CRP123 PLUS screen is damaged or does not work properly?
  If the LAUNCH CRP123 PLUS screen is damaged or does not work properly, please send a picture or video to us. We will assist you in solving the problem. Please contact us at [email protected].

• Does LAUNCH CRP123 PLUS support old car diagnosis?
  The LAUNCH CRP123 PLUS supports OBD2 cars. If your car supports OBD2, then the CRP123 PLUS should work for it. However, it is better to send us the VIN of the car to confirm compatibility. Please contact us at [email protected] for any other questions.

FAQS for LAUNCH CRP123 PLUS

• Q:Where to download the LAUNCH CRP123 PLUS lib file?
  A:This is the download link below: https://eninfo.x431.com/prod_view.aspx?TypeId=68&Id=191 You can down load with below:

Q:How to Register & Update LAUNCH CRP123 PLUS?
A: Follow the steps described as below to proceed register and update:

1. If you need to upgrade or restore the machine, you need to copy the register password of the machine first, in the product “Help – tool information”.
2. Go to http://www.x431.com/CRP123 PLUS and click update icon.
3. Take out the TF card of the machine after installing the client.
4. Put the TF card into the card reader and connect it to the computer.
5. Then open the installed client, enter the product serial number (located on the back of the tool) and select “Device upgrade”.
6. After the Serial Number is entered, click update and enter the following information. Click “Submit.”
7. If you use it for the first time, the register interface will pop up. You need to fill in your email and the register password you copied before, and then submit it.
8. After submission, the upgrade screen is displayed. Select the software and language to be upgraded and click “Download” to start the upgrade.
9. After downloading, install the card back to the machine. When starting up, it will prompt you to upgrade.

Q:What should I do if there are some problems with the product software, such as stalling, failure to start, or missing LIB files?
A:You need to restore the factory to solve these problems with the step below:

1. Open the installed client, select “Restore System”
2. Then select the corresponding product model CRP123 PLUS to start the restore.
3. After the restore, TF needs to be put back into the machine for initialization. After the initialization, the machine cannot be used.
4. After the initialization, TF should be put back on the computer to complete the “Device upgrade” process again before it can be used normally.

• Q: Does CRP123 PLUS support the full system diagnostic?
  A: YES, the launch CRP123 PLUS scanner automatize gives you the ability to troubleshoot entire car systems including engion system, transmission system ,body system, brake ,chassis, powertrain, fuel, light system, etc. Built-in full OBDII special services including Read/Clear codes, Freeze frame, O2 Sensor, I/M Readiness, Smog Test, EVAP system, on board monitor test, Retrieve ECU Information, vehicle info etc .If you have any other questions, please feel free to contact the mail [email protected].

• Q: How many languages CRP123 PLUS support?
  A: LAUNCH CRP123E PLUS supports 10 languages including English, French, Spanish, German, Russian, Japanese, Portuguese, Italian, Traditional Chinese, Polish. You can choose whatever language is best for you. If you have any other questions, please feel free to contact the mail [email protected].

• Q: What if LAUNCH CRP123 PLUS can’t read ABS code?
  A:Please send the order and product serial number and your car model and year or vin number to us. We can solve your problem to let you satisfied,please be reassured. If you have any other question, please email to [email protected], thank you!

• Q: What if the LAUNCH CRP123 PLUS screen is damaged or does not work properly?
  A:Please send the picture or video to us.We can solve your problem to let you satisfied,please be reassured. If you have any other question, please email to [email protected], thank you!

• Q: Does LAUNCH CRP123 PLUS not support old car diagnosis?
  A:LAUNCH CRP123 PLUS can support obd2 cars. If your car support obd2,then CRP123 PLUS should work for it .But it is better to send us the vin of the car to confirm if it is compatible .If you have any other question, please email to [email protected], thank you!

• Q:What if LAUNCH CRP123 PLUS is not compatible with your computer system?
  A:Hello,I am sorry our CRP123 PLUS obd2 scanner only support android system and can not support Apple so system and also can not support windows 11 system temporarily .It can work on other windows system such as windows 7, windows 8 and windows 10 system. But the CRP123 PLUS keeps updating in the future. If you still have another question ,please contact [email protected].Thanks!

• Q:What if I receive a used LAUNCH CRP123 PLUS?
  A:Please send the product serial number and picture or video to us.We can solve your problem to let you satisfied, please be reassured. If you have any other question, please email to [email protected].

• Q:What if the lib file of LAUNCH CRP123 PLUS does not exist?
  A:

1. The first step is to restore factory Settings;
2. If you still can’t find the document, please contact [[email protected]](mailto:[email protected]). We will resend it for you for free.

• Q:System halts when reading data stream. What is the reason?
  A: It may be caused by a slackened connector. Please turn off the CRP123 PLUS, firmly connect the connector, and switch on it again.

• Q: Screen of main unit flashes at engine ignition start?
  A:Caused by electromagnetic disturbing, and this is normal phenomenon.

• Q:There is no response when communicating with on-board computer?
  A: Please confirm the proper voltage of power supply and check if the throttle has been closed, the transmission is in the neutral position, and the water is in proper temperature.

• Q: Why are there so many fault codes?
  A: Usually, it’s caused by poor connection or fault circuit grounding.

• Q:Does LAUNCH CRP123 PLUS work on trucks?
  A:I am sorry the LAUNCH CRP123 PLUS can not work on trucks .And it need to more advanced diagnostic tool to meet your need .If you need to recommend suitable products ,please contact [email protected].

• Q: What’s in the package?
  A: Package included: 1Launch CRP123 PLUS Main unit,1OBDII Cable & 1Charging Cable,1TF card &1TF card reader,1User Manual & 1*Quick Start.If you have any other questions, please feel free to contact the mail [email protected].

• Q:Does LAUNCH CRP123 PLUS support bi-directional control?
  A:I am sorry the LAUNCH CRP123 PLUS can not support bi-directional control. And it need to more advanced diagnostic tool to meet your need. If you need to recommend suitable products ,please feel free to contact [email protected].

• Q:Is LAUNCH CRP123 PLUS scan tool an American model unit?Can I use it outside America?
  A:Yes, LAUNCH CRP123 PLUS is an American model unit and no IP limited. And if you encounter problems, you can contact the merchant kingbolen directly by mail [email protected] or access order to find us to contact us.

• Q:Why didn’t I get any reply from the American LAUNCH service?
  A:As I learn, Launch Tech USA is an offline distributor of Launch in the USA, not a headquarter factory, they won’t provide online after-sales service for Amazon distributor’s products, but we can offer better technical support .If you have any other question, Please contact [email protected] anytime, we will definitely help you. Thanks!

References

• X431
• X431

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>