niko 353-601121 Motion Detector Installation Guide
- June 15, 2024
- niko
Table of Contents
niko 353-601121 Motion Detector
Product Information
Specifications
- Article number: 353-601121
- Configuration: 230 V Master
- Input voltage: Not specified
- Maximum power consumption: 0.2 W
- Circuit breaker: Maximum MCB rating 16 A*
Product Usage Instructions
Mounting
The presence detector can be mounted using the SnapFit mounting system. It
supports various mounting options including:
- Mounting on a fixed ceiling
- Suspended ceiling installation (requires removal)
Wiring
The presence detector requires correct wiring for proper operation. Follow
the wiring scheme provided to ensure correct installation. If you want to use
the contact as a dry contact (potential-free), remove the * marked component.
It is important to secure this product with a miniature circuit breaker (MCB)
of maximum 16 A in the electrical cabinet. Please note that the MCB rating is
limited by national installation rules.
Dimensions
- Height: 44 m
- Width: 56.9 mm
- Depth: 9.5 mm
App Settings
The presence detector can be configured using the accompanying app. The
following settings are available:
- Factory settings
- Switch ON/OFF
- 500 lux sensitivity
- 15-minute switch-off delay
- Detector tool for configuration
- LED behavior (varies by language)
Detection Area
The presence detector has a detection area represented by the letters H, A,
B, C, D. These letters indicate the walking direction and the corresponding
coverage area.
Troubleshooting
Problem: Load does not turn on
- Possible Cause : The wiring is not correct
- Proposed Solution : Check the wiring scheme to ensure correct installation.
Problem: Load does not turn off
Possible Cause: The ambient light is too strong or the switch-off delay
is too long
Proposed Solution: Check the response value of luminosity and adjust it
if necessary. Also, check the switch-off delay and shorten it if needed.
Problem: App cannot connect to the detector
Possible Cause: The detector receives false triggers Proposed Solution:
Check for any objects that may cause false triggering and remove them from the
detection range or lower the sensitivity.
FAQ
Q: What is the maximum power consumption of the presence detector?
A: The maximum power consumption is 0.2 W.
Q: What is the circuit breaker rating for the presence detector?
A: The maximum MCB rating is 16 A*
Presence detector P42MR, 230 V, master, 12-13 m, 360°, SnapFit, for flush mounting
Wiring 230 V – OFF
* Remove if you
want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16
A in the electrical cabinet. The MCB rating is limited by national
installation rules.
Dimensions
Installation 230 V – OFF
App settings
230 V – ON
LED behaviour
Specifications
-
Article number 353-601121
-
Configuration 230 V Master
-
Input voltage 230 Vac ± 10 %, 50 Hz
-
Maximum power consumption 0.2 W
-
Circuit breaker maximum MCB rating 16 A*
-
Relay contact NO (max. μ10 A), potential-free
-
Maximum load incandescent and halogen lamps (cosφ = 1) 2300 W
-
Maximum load fluorescent lamps (cosφ ≥ 0.5) 1200 VA
-
Maximum load economy lamps (CFLi) 350 W
-
Maximum load LED lamps 230 V 350 W
-
Maximum load LED driver 500 VA
-
Maximum load electronic transformer 500 VA
-
Maximum capacitive load 140 μF
-
Maximum switching current 165 A/20 ms or 800 A/200 μs
-
Light intensity range 20 – 2000 lux, ∞
-
Number of channels 1 channel
-
Maximum number of secondary detectors 10
-
Switch-off delay pulse, 15 s – 120 min, ∞
-
Hysteresis on light intensity + 10%
-
Detection angle 360°
-
Detection range (PIR) Ø 12 m from a height of 3 m
-
Ambient temperature -25 – +40 °C
-
Mounting method flush mounting with SnapFit mounting bracket
-
Mounting height 2 – 3.5 m
-
Drill diameter 76 mm
-
Minimum flush mounting depth 56.9 mm
-
Colour white (RAL 9010)
-
Dimensions visible (HxWxD) 100 x 100 x 9.5 mm
-
Dimensions (HxWxD) 120 x 120 x 66.4 mm
-
Wire capacity 1.5/2.5 mm²
-
Maximum range Bluetooth® (free field, depending on the device) 50 m
-
Operating frequency 2.4 GHz
-
Maximum radio frequency power -2 dBm
-
Protection degree IP20
-
Impact resistance IK02
-
Modification of settings app (iOS/Android) and 2-way Bluetooth communication
-
Halogen-free yes
-
Marking CE
-
The MCB rating is limited by national installation rules.
Detection area
Troubleshooting
Support & contact
- nv Niko sa
- Industriepark West 40 9100 Sint-Niklaas, Belgium
- www.niko.eu
+32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>