SIGNATURE HARDWARE 485304 Lighted Mirror Oval Instruction Manual

SIGNATURE HARDWARE 485304 Lighted Mirror Oval

Specifications

• Product Codes : SH66224040, SH66218040
• Phone Number : 1.855.715.1800

Product Usage Instructions:

Tools and Materials

• Level (Nivelador, Niveau)
• Drill (Taladro, Perceuse)
• Hammer (Martillo, Marteau)
• Phillips Screwdriver (Destornillador Phillips, Tournevis cruciforme)

Installation

1. Hold the mounting bar in place and use a level to ensure it is horizontal. Mark the mounting bar holes with a pen.
2. Using a drill, drill mounting holes at the marked= locations.
3. Put expansion plugs into the mounting holes and align the wall holes with the mounting bar holes. Attach the mounting bar using a screwdriver.
4. Repeat steps 1-3 to install the bottom bracket.
5. Measure the distance of A (±1/2) between the two brackets.
6. Hang the mirror and slightly shake it left and right to ensure stability.

Usage
To use the mirror

1. Push the sensor on the mirror.
2. Let your finger leave the sensor for 1 second.
3. Press and hold the sensor to adjust the light intensity from 100% to 10%. Repeat this step to adjust the light intensity from 10% to 100%.
4. Touch the sensor twice quickly to change the color temperature.
5. The mirror is equipped with a memory feature to preserve the previous state when turning the light back on.

Warnings

• Do not use the product if it is damaged or broken.
• Do not put any hard or sharp materials directly against the mirror’s surface during use to avoid current leakage or personal injury.
• Turn off the power switch during heavy thunderstorms.
• Do not unplug the mirror to turn it off, as it may damage the electric elements of the product.
• Unplug the mirror if it will not be used for long periods of time.

FAQ

• Q: Where can I find additional product and warranty information?
  A: You can check out our Help Center at www.signaturehardware.com or contact us through live chat or by emailing support@signaturehardware.com.

BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing plumbing FIxtures. Signature Hardware accepts no liability for any damage to the product, wall, electrical components or for personal injury during installation.
Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehard-ware.com or by emailing support@signaturehard-ware.com.

GETTING STARTED
Ensure that you have gathered all the required materials that are needed for the installation.

TOOLS AND MATERIALS

INSTALLATION

1. Hold mounting bar in place, use level to ensure the mounting bar is horizontal level. Mark the mounting bar holes with a pen.
2. Using a drill, drill mounting holes at marked locations.
3. Put expansion plug into the mounting holes. Align the wall holes and the mounting bar holes and a?x the mounting bar using a screwdriver.
4. Measure the distance of A ( 1/2”) between the two brackets.
5. Repeat steps 1-3 to install the bottom bracket
6. Hang the mirror, slightly shake left and right to ensure the mirror is stable.
7. Connect wiring as shown below.
8. Turn on the power.

USAGE

1.  Push the sensor on the mirror

2.  Let your finger leave the sensor for 1 second

3.  Press and hold the sensor.
   Then the light will turn from 100%to 10%, after that you can repeat 2nd and 3rd procedure, the light will turn from 10% to 100%

4. Touch Twice Quickly : Change color temperature

5.  The mirror is equipped with a memory feature to preserve the previous state, when turning the light back on

WARNING

1. Do not use if the product is damaged or broken.
2. Do not put any hard or sharp materials directly against the mirrors surface during use. This may result in current leakage or personal injury.
3. Turn off the power switch during heavy thunderstorms.
4. Do not unplug the mirror to turn o?, electric elements of the product may be damaged.
5. Unplug the mirror if not in use for long periods of time.

• 1.855.715.1800
• signaturehardware.com
• REVISED 05/09/2023
• CODES : SH66224040, SH66218040

References

• ware
• Signature Hardware - Shop Unique, Quality Decor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>