FONENG BL500 TWS Bluetooth Earphone Instruction Manual
- June 15, 2024
- FONENG
Table of Contents
BL500 TWS Bluetooth Earphone
Instruction Manual
Thanks for your purchase and use for our goods for better experience. please read the instrument carefuly.
Specification
model: | BL 500 |
---|---|
chipset: | JL6973D |
Bluetooth version: | 5. 1 |
combination name: | BL500 |
connection distance: | 10M/33 inch |
RF injection rate: | CLASS2 SdBm |
music time: | 4.5 hour |
dial time: | 4 hour |
single earphone weight: | 3.1 g |
earphone charging time: | 1 hour |
battery box charging time: | 2 hour |
battery box life: | 12 hour |
earphone rate: | Li-on battery 3.7V/25mAh |
battery box rate: | Li-on battery 3.7V/230mAh |
charging port: | Lightning |
speaker diameter: | speaker diameter=Φ13mm |
speaker impedance: | 32Ω±15% |
Acceptance sensitivity: | – 90dBm |
IPhone operation
- open the hat, poweron.
- put earphone into battery box to power off or auto off when 3 minutes no connection.
- left and right earphone inside the boss, close hat, auto combination after 15 to 30 seconds, immediate combination by pressing the box button till the red lights on.
- open the Bluetooth, iPhone will show window pop-up, combine it by the tips.
- press two times on left or right earphone part to answer.
- press two times to hang off.
- long press 1 seconds to refuse dialing.
- hands operation to cancel combination with mobile.
- power off automatically when its no connection for 3 minutes.
- music pause/play , press left or right earphone 2 times.
- switch to last song : press left earphone 3 times.
- switch to next song: press right earphone 3 times.
- choose Bluetooth connection setup, press 2 seconds to activate SIRI.
- charging: orange lights on for 8 seconds then off.
- in-ear detection: put earphone out of ear and music pause, putitineara, then music play automatically.
- wireless charge: put battery box in wireless charger center, auto detection and charging, red lights on.
Android operating system mobile phone
- open the hat, power on.
- put earphone into battery box to power off or auto off when 5 minutes no connection.
- left and right earphone inside the boss, close hat, auto combination after 15 to 30 seconds, immediate combination by pressing the box button till the red lights on.
- open the Bluetooth, search device”BL500″, hands operation at first time.
- press two times on left or right earphone part to answer.
- press two times to hang off7.long press 1 seconds to refuse dialing.
- hands operation to cancel combination with mobile.
- power off automatically when its no connection for 3 minutes.
- music pause/play , press left or right earphone 2 times.
- switch to last song : press left earphone 3 times.
- switch to next song: press right earphone 3 times.
- charging: orange lights on for 8 seconds then off.
- in-ear detection: put earphone out of ear and music pause, put itineara, then music play automatically.
- wireless charge: put battery box in wireless charger center, auto detection and charging, red lights ontips: for the compatibility problem of Android system Bluetooth parts, few functions above is not available in some model.
Warranty Card
Purchase date: | Warranty time: |
---|---|
Name: | Tel: |
Email:
Address:
Warranty range:
Warranty date:
If the damage reason like below,sorry for no warranty service
- the warranty effective period is over;
- improper use to cause surface damage;
- outside package and gift damage;
- ignore the construction,wrong use and refit to cause damage.
Shenzhen Be-Fund Technology Co., Ltd.
Add: Room 2305 Jia‘’anda Building, 110 Huafan Road,
Dalang Street, Longhua District, Shenzhen, Guangdong, China
Web:szfoneng.com
Tel: 0755-36947220 http://weixin.qq.com/r/AHVEXKTEzPmzreA-9yAS
Documents / Resources
|
FONENG BL500 TWS Bluetooth
Earphone
[pdf] Instruction Manual
BL500 TWS Bluetooth Earphone, BL500, TWS Bluetooth Earphone, Bluetooth
Earphone, Earphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>