TRIM-TEX IL 60712 Hideaway Expansion Installation Guide
- June 15, 2024
- TRIM-TEX
Table of Contents
TRIM-TEX IL 60712 Hideaway Expansion
Product Information
Hideaway Expansion
The Hideaway Expansion bead is designed to provide a seamless and stealthy
control joint for building movement. It features a shallow profile and is
constructed using both rigid and flexible PVC materials, allowing it to
accommodate up to [insert maximum building movement measurement] without
compromising its structural integrity. The bead is equipped with tear-off
strips for easy finishing.
Product Usage Instructions
Before Installation
- Snap chalk lines on the wall as a guide for installation.
- Measure the required length of the bead and cut it accordingly.
- Dry fit the bead in place to ensure proper alignment.
-
Step 1: Prepare the Surface
Coat both the Hideaway Expansion bead and the drywall surface with Trim-Tex 847 Spray Adhesive. This adhesive will help ensure a strong bond between the bead and the wall. -
Step 2: Install the Bead
Press the Hideaway Expansion bead firmly in place, making sure to apply pressure on the mud legs. This will securely attach the bead to the wall surface. -
Step 3: Apply Drywall Compound
Using a trowel or putty knife, apply drywall compound over the Hideaway Expansion bead. Make sure to cover the entire surface of the bead and feather out the edges for a smooth finish. -
Step 4: Finishing
Allow the drywall compound to dry completely. Once dry, use sandpaper or a sanding block to smooth out any imperfections and create a seamless finish. -
Step 5: Removing Tear-Off Strips
Prior to sanding, carefully remove the tear-off strips from the Hideaway Expansion bead. These strips are designed to facilitate easy finishing and should be removed to achieve the desired result.
Specifications
- Material : Rigid and flexible PVC
- Maximum Building Movement Accommodation : [insert maximum building movement measurement]
Frequently Asked Questions (FAQ)
-
Q: Can I paint over the Hideaway Expansion bead?
A: Yes, the bead can be painted to match the surrounding wall or trim. Make sure to use a paint suitable for PVC materials. -
Q: How do I clean the Hideaway Expansion bead?
A: Use a damp cloth or sponge to gently wipe down the bead. Avoid using abrasive cleaners or scrubbing brushes that could damage the surface. -
Q: Can the Hideaway Expansion bead be used for exterior applications?
A: No, the Hideaway Expansion bead is designed for interior use only.
Hideaway Expansion
This expansion bead features a shallow profile while still accommodating up to
⅜” in building movement thanks to its rigid and flexible PVC construction.
Finish is a breeze with its tear off strips. The finished result produces a
very stealthy control joint.
Installation Guide
Before Installation
Snap chalk lines as a guide. Measure, cut and dry fit the bead.
-
Step 1
Coat both the bead and drywall with Trim-Tex 847 Spray Adhesive. -
Step 2
Press the bead in place, applying pressure to the mud legs. -
Step 3
Staple every 6”-8” using ½” staples. -
Step 4
Finish with drywall compound. -
Step 5
Remove tear-off strips prior to sanding.
3700 W Pratt Avenue, Lincolnwood, IL 60712 • 800-874-2333 • trim-tex.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>