ZZSTAR Upgraded Toilet Plunger Instruction Manual

ZZSTAR Upgraded Toilet Plunger

Instruction Manual

Upgraded Toilet Plunger

One-click to dredge, ease your life

Use Pressure Value Reference

Assembly Method

Please read the following installation steps carefully before use, helps to use the product correctly.

1. Make sure the sealing ring fits tightly with the groove
2. Make sure the hollow side of the position faces inward
3. Connect the upper and lower parts of the product and tighten
4. Install the inflatable base
5. Pull the handle up and down to inflate until reach required air pressure
6. Unscrew the nut of toilet unclog head
7. Put the nut over the air outlet of product, insert the unclogging head and then tighten the nut
8. Insert the plunger into the toilet, and place it in the direction of sewer
9. Press the release button, one-click to dredge

Precautions
Please observe the following precautions during use

1. While dredging the toilet, the product needs to maintain a 45 degrees with the toilet wall.
2. Can not be used to clear the blockages caused by hard plastics or construction waste.
3. Do not aim the nozzle at the mouth, nose, ears and eyes.
4. If the pipeline is semi-blocked, it is recommended to put some toilet paper sundries to make the pipeline near to full blockage, so the product will have a better use effect.
5. While using for unclog toilet, it is recommended to add little more water and cover it with film to avoid splashing on yourself.
6. Continuous use should not exceed 5 times to avoid excessive temperature and damage the machine. Let it dry for more than 30 minutes before use.

Problems May Occurs During Use

• Q: Why it did not hold the pressure?
  A: check if the sealing ring fit tightly into groovy check if the hollow side of position face inward

• Q: What problem if barometer did not change while inflating?
  A: The action of inflation should be continuous and fast.

• Q: Not enough pressure? Did not clear the blockage in the pipe.
  A: The maximum pressure value is 120 psi. If the blockage does not clear, increase the pressure and try again.

Warm Tips

Make sure the sealing ring & position fit tightly into the slot

Note : Be quick and continuous while inflating!

• Zeal Service, Zoom Your STAR
• Thanks for your purchasing, we are pursing to offer you 100% satisfactory products and services.
• If any questions, Please directly contact ZZSTAR-US@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>