LEDone LOC-EMDR-25WHV LED LOC-EMDR Emergency Driver Series User Guide

LEDone LOC-EMDR-25WHV LED LOC-EMDR Emergency Driver Series

FEATURES

1. Listed to UL924
2. Test to CSA C22.2 NO. 141 Field or factory installation
3. High output voltage
4. Low energy consumption CEC Title 20 compliant
5. Constant output power
6. Self-testing
7. Battery: Li-ion
8. Battery: over temperature protection
9. Ambient Temp: Li-ion: 0°-50°C (32°F-122°F)
10. 5-year warranty

SELF-TESTING

The emergency LED driver contains a control/monit or circuit which will perform a 30-second discharge test once a month and a full di scharge test once a year. At this time, the unit will simulate an AC power failure and autom atically switch to emergency mode. During routine testing, the unit will monitor the opera tion of the LED load, battery voltage and emergency duration. If the unit detect s any problems, the indicator will flash quickly.

CAUTION

• During AC operation, remember not to touch or remove and wires in case of electrical shock.
• During emergency operation, before touching and disconnecting the wires, remember to press the test button again to make the LED lamp and indicator light turn off to avoid electric shock.
•  The voltage input to the dimmable wires (DIM+, DIM-) of emergency LED driver must be less than 20Vdc.
• Maximum suggested LED fixture wattage is

FUNCTION

• AC operation, indicator light will keep on.
• Emergency operation, indicator light will flash slowly (light on for 2 seconds, light off for 2 seconds).
• In a failure, indicator light will flash quickly (light on for 0.2 seconds, light off for 0.2 seconds).

TEST SWITCH

• In AC operation, press the test switch once to run the emergency power for 30 seconds.
• In AC operation, press the test twice within 3 seconds to make the battery full discharge.
• In emergency operation, press the test switch once. This will turn off both the emergency as well as the lamp and indicator light at the same time.

MODEL NUMBER| INPUT VOLTAGE| INPUT

CURRENT

| INPUT POWER

RATING

| OUTPUT VOLTAGE| EMERGENCY

POWER

| RECHARGE

TIME

| DISCHARGE

TIME

---|---|---|---|---|---|---|---
LOC-EMDR-25WHV| 100-347Vac, 50/60Hz| 200mA max.| 12W max.| 170Vdc| 25W max.| 24Hrs.| 90 mins.
LOC-EMDR-40WHV| 100-347Vac, 50/60Hz| 200mA max.| 12W max.| 170Vdc| 40W max.| 24Hrs.| 90 mins.

Series

| ****

Type

| ****

Wattage

---|---|---
LOC-EMDR| Emergency Driver| 25W

40W

MEASUREMENTS

• Date: ___
• Location: _____
• Product: ___
• Project: ____
• Quantity: _____
• Catalog #: ____

Documents / Resources

| LEDone LOC-EMDR-25WHV LED LOC-EMDR Emergency Driver Series [pdf] User Guide
LOC-EMDR-25WHV, LED LOC-EMDR Emergency Driver Series, Emergency Driver Series, LED LOC-EMDR Driver Series, Driver Series
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>