ELECOM CR50804 Gaming Mouse User Manual

: June 15, 2024
: ELECOM

Table of Contents

ELECOM CR50804 Gaming Mouse
Product Information
Product Usage Instructions
Precautions
How to use
Specifications
Compliance status
FCC STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELECOM CR50804 Gaming Mouse

Product Information

Model: CR50804
Product Name: Gaming Mouse
Description: This user manual provides important information on the safe operation and usage of the gaming mouse.

Precautions This manual describes the important precautions you should take for safe operation of this product. Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.

Product Usage Instructions

Charging the Mouse

To charge the gaming mouse, follow these steps:

Use the charging cable included with the product.
Connect one end of the cable to the mouse and the other end to a power source.
Observe the specified charging conditions to avoid overheating, leaking, or rupturing of the battery.

Using the Mouse To use the gaming mouse, follow these steps:

Make sure the mouse is charged and turned on.
Connect the receiver unit to your PC using the USB cable provided.
Ensure that the mouse is within the range of the receiver for optimal performance.
Use the buttons and scroll wheel on the mouse for navigation and interaction with your computer.

Specifications

Model: CR50804
Product Name: Gaming Mouse
User Manual: M-VM610, EG01A

Frequently Asked Questions

Q: Can I use a different charging cable for the gaming mouse?
- A: No, it is recommended to use the charging cable included with the product to avoid overheating, leaking, or rupturing of the battery.
Q: What should I do if I notice any abnormalities with the mouse?
- A: If you notice any leaking, discoloration, deformation, or any other abnormalities from past usage, stop using the mouse immediately. Continued use may lead to overheating and rupturing. Contact your dealer for further assistance.
Q: What should I do if liquid from the built-in rechargeable battery comes into contact with my skin?
- A: Wash the affected area with clean water immediately. Liquid from the battery can cause skin damage. If any symptoms persist, seek medical attention.
Q: Can I use the gaming mouse with a different voltage?
- A: No, it is important to use the mouse at the set voltage range specified. Usage outside the set voltage range can cause overheating, ignition, electric shock, or personal injury.
Q: What should I do if a foreign object enters the mouse?
- A: If a foreign object (such as water or metal chips) enters the mouse, immediately stop using it and remove the battery. Continuing to use the mouse may cause a fire or electric shock. Contact your dealer for further assistance.

Thank you very much for purchasing this product.
*“VM610” is referred to as “this product” in many parts of this manual.

Precautions

This manual describes the important precautions you should take for safe operation of this product.
Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.

Meaning of symbols

DANGER: Failure to adhere to the precautions listed here carries the high risk of severe injury or death due to fire, electric shock, or other causes.
WARNING: Failure to observe precautions carries the possibility of serious personal injury or death due to fire, electric shock, or other causes.
CAUTION: Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.

Prohibited action
Mandatory action
Situation that needs attention
Notes and reference information

DANGER

Please use the charging cable included with this product and observe our specified charging conditions.
- Usage of other charging cables or failure to observe our charging conditions may cause the battery to overheat, leak, or rupture.
Do not attempt to disassemble, modify or repair this product.
- Doing so may cause a fire, electric shock, or product damage.
- Malfunctioning is not covered under warranty.
Do not use if there is any leaking.
- If the built-in rechargeable battery leaks, do not use it. It may heat up or rupture.
If you notice any abnormalities with this product, stop usage immediately.
- If you notice any leaking, discoloration, deformation, or any other abnormalities from past usage, stop usage immediately. Continued use may lead to overheating and rupturing.
If you or your clothes come into contact with any liquid from this product, wash with clean water.
- If liquid from the built-in rechargeable battery comes into contact with the skin, it can lead to skin damage.
Liquid from the built-in rechargeable battery can cause blindness if it enters the eye. If the liquid enters the eye, do not rubit. Wash thoroughly with clean water and seek immediate medical attention.
Please use at the set voltage.
- Usage outside the set voltage range can cause overheating, ignition, electric shock, or personal injury.

WARNING

If a foreign object (water, metal chips) enters this product, stop using immediately and remove the battery.
- Continuing to use the product as it is may cause a fire or electric shock.
If this product is behaving abnormally, such as generating heat or smoke or strange smells, stop usage immediately. Shut off any connected device(s), and confirm that the product is safe to touch before removing the receiver unit or the USB cablefrom your PC. Afterwards, please contact your dealer.
- Continuing to use the product as it is may cause a fire or electric shock.
Please do not drop or hit this product.
- If the product is damaged, stop usage immediately, shut off power to this product and remove the receiver unit or USB cable from your PC. Afterwards, please contact your dealer.
- Fires or electric shocks may occur if this product is used when damaged.
Do not put this product in fire.
- Ruptures may cause fire or injury.
Please do not remove or connect the USB connector with wet hands. In addition, do not modify or forcibly bend theproduct.
- It can cause a fire or electric shock.

CAUTION

Do not place this product in any of the following environments:
- In a car exposed to sunlight or a place exposed to direct sunlight.
- In a place that becomes hot, such as around a heater.
- In a moist place or a place where condensation may occur.
- In an uneven place or a place exposed to vibration.
- In a place where a magnetic field is generated (such as near a magnet.)
- In a dusty place.
This product does not have a waterproof structure. Use or store in a place not exposed to liquids such as water.
- Any liquid such as rain, water spray, juice, coffee, steam, and sweat, may cause this product to breakdown.
Attention: Please do not use this product for anything other than as a mouse for PCs.
- Do not use this product with any device that may significantly be affected in the case of this product malfunctioning.
- If this product is used on a transparent surface such as glass or a highly reflective surface such as a mirror, the optical sensor will not function correctly and the mouse cursor movement will become unstable.
- Although the sensor light is not visible, please note that looking directly into the sensor may hurt your eyes.
- When you wish to dispose of this product, be sure do so in accordance with the local ordinances and laws of your area.

Cleaning this product

If the body of this product becomes dirty, wipe with a soft, dry cloth.
- Using a volatile liquid such as paint thinner, benzene or alcohol may affect the material quality and/or discolour this product.
Please note the following for disinfection.
- Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets andgently wipe the product using the cloth.
- After wiping, dry thoroughly and wipe off any residual liquid.
- *Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.

IMPORTANT

Do not spray any liquid onto the product directly.
- Doing so can cause electric malfunctions.
Do not use organic solvents or ultraviolet lights.
- Usage can result in deterioration of the housing components or paints, which can cause damage to the exterior.

Note

We recommend the usage of disposable gloves.
Please unplug the USB connector from this product and the PC.
When using any alcohol-based products, please check that it is appropriate for the specific purpose and that it is used properly.
Please note that in the event that damage or abnormal operation to the product is caused by the cleaning process, the customer will be fully responsible for the cost of repair.
We recommend that you disinfect your hands before and after using PCs and peripheral devices that are used by multiple people in order to prevent the spread of infection through the equipment.
Please turn off any connected devices.
- When in sleep or hibernation mode, turn off connected devices.
- Please unplug the AC adapter and power cable from the outlet.

Cautions for Wireless Equipment

This product is a wireless device that can use the entire 2.4 GHz band, and is able to avoid the mobile entity identification devicerange. The GFSK method is adopted as the radio wave method, and the interference distance is 10 m. The 2.4 GHz band is also usedin medical devices, Bluetooth, and wireless LAN devices of the IEEE 802.11b/11g/11n standards.

Before using this product, check that there are no other “radio stations”* operating nearby.
If electromagnetic interference occurs between this product and other “radio stations”*, move this product to another location orstop using this product.
Other “radio stations” refer to industrial, scientific and medical devices using the 2.4 GHz band, the same as this product, otherradio stations of this type, licensed radio station premises for a mobile object identification system that is used in factoryproduction lines, certain non-licensed low power radio stations, and amateur radio stations.

WARNING

Do not use in equipment which may cause serious effects due to it malfunctioning. There are rare cases in which an external radiowave at the same frequency, or the radio wave emitted from a mobile phone, causes this product to malfunction, slow down, or failto operate.
Do not use this product in places where radio wave usage is prohibited, such as hospitals. Radio waves of this product may affectelectronic devices and medical devices (for example pacemakers).
Due to the possibility of hindering safe navigation of aircraft, use of wireless mouse in aircraft is prohibited by the Civil AeronauticsAct. Turn off the power of the wireless mouse before boarding and do not use after boarding.
ELECOM is not liable for any accidents or any indirect or consequential damage incurred due to the failure of this product.

How to use

Items included in this package

The following are included in this package. Verify the package to ensure all items are accounted for prior to using this product. Whileevery effort has been made to ensure proper packaging, in the event that any shortage or damage is discovered, please contact theretailer where the product was purchased.

VM610 Main unit x 1
Receiver unit x 1
- Attention: At the time of shipment, it is stored in the receiver unit storage part of the mouse body.
- Please remove before use.
USB Type-C® to USB-A paracord charging cable (approx. 1.5 m / 5 ft) x1
Receiver extension adapter x 1
Additional mouse feet for 2-Mode system x 1
Replacement spare mouse feet x 1
Cleaning cloth x 1
V custom logo sticker x 1

Name and function of each part

Mouse

① Left button
- To left click on your PC.
② Right button
- To right click on your PC.
③ Wheel
- Rotate forward and backward or click like a button to operate your PC.
④ “Back” button
- Performs the “Back” function on the Web browser.
⑤ “Forward” button
- Performs the “Forward” function on the Web browser.
⑥・⑦ Additional buttons
⑧ DPI stage switch button
Count number (pointer movement speed) can be changed between 5 levels.
- DPI1: 400dpi
- DPI2: 800dpi (default)
- DPI3: 1600dpi
- DPI4: 2400dpi
- DPI5: 3200dpi
- The count number for each stage can be adjusted. To adjust it, please install the EG Tool from our website.
- For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” – ” Setting the DPI Stage”.
- You can assign the function for all the buttons in ① ~ ⑧. To configure the button assignment, please install the EG Tool from our website.
- For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” – ” Setting the function of the buttons”.
⑨ Notification LED
- When the power is turned ON, the LED will light up for 3 seconds in the color corresponding to the current DPI stage. (The default is DPI2: purple.)
- When the remaining charge is low, the LED will blink quickly in the color corresponding to the current DPI stage. (The default is DPI2: purple.)
- During charging, the LED will blink continuously in the color corresponding to the current DPI stage. (The default is DPI2:purple.)
- When the device is fully charged, the LED will light up in the color corresponding to the current DPI stage. (The default is DPI2: purple.)
- When you press the DPI stage switching button, it will light up for 3 seconds with the color corresponding to the DPI stage currently being set.
- DPI 1： Red
- DPI 2： Purple
- DPI 3： Indigo
- DPI 4： Green
- DPI 5： Yellow
  - To adjust the DPI stage, please install the EG Tool from our website.
  - For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” – ” Setting the DPI Stage “.
⑩ USB Type-C port
- Port to connect the supplied charging cable.
⑪ Lift cut-off distance sensor
- When you lift the mouse, the sensor detects the LoD (Lift off Distance).
- The LoD (Lift off Distance) can be changed. To adjust it, please install the EG Tool from our website.
- For more information, see “Setting up the ELECOM GAMING Tool (EG Tool)” – “ Optimize the lift-off distance for the mousepad”.
⑫ Optical sensor
- This sensor will detect the mouse movements when you move the mouse.
- *The sensor uses invisible (transparent) light. Please note that direct viewing of the light source may hurt the eyes.
⑬ Power switch
- When using it with wireless connection, turn the power on / off on the mouse body.
⑭ Receiver unit storage part
- The receiver unit can be stowed here when it is not being used with the mouse or it is being wirelessly connected.
- Receiver unit
⑮ USB connector
- Connects to the PC USB-A port

Connecting and setting up the mouse

Using in wireless mode

Charging the battery

Connect the USB Type-C connector of the charging cable supplied to the USB Type-C port of this product.
Connect the USB-A connector on the included charging cable to the USB-A port on your PC.
- Ensure that the connector is correctly oriented to the port.
- If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury.
- Do not touch the terminal portion of the USB connector.
Turn on the power of the PC, if it has not been already switched on.
- The RGB LED light flashes in the color corresponding to the DPI stage currently set (the default is DPI2: purple) and starts charging. When the device is fully charged, the LED will light up in the color corresponding to the current DPI stage (the defaults DPI2: purple).

Attention

It takes about 5 hours for the product to be fully charged.
If the RGB LED light continues to be lit up in the color corresponding to the current DPI stage (the default is DPI2:purple) even after the stipulated charging time, remove the charging cable and stop charging for a moment. Otherwise,this can cause overheating, rupturing or fires.

Turn the power ON

Slide the power switch on the underside of this product to the ON position.
- The RGB LED light will light up for 3 seconds in the color corresponding to the current DPI stage (the default is DPI2: purple).
- When the battery level is low, the LED light will blink quickly in the color corresponding to the current DPI stage (the default is DPI2: purple). (The default is DPI 2: purple)

Power-saving mode

When the mouse is left untouched for a fixed period while the power is ON, it automatically shifts to power-saving mode.
The mouse returns from power-saving mode when it is moved.
Mouse operation may be unstable for 2-3 seconds after returning from the power-saving mode.

Connect to a PC

Start up your PC.
- Please wait until your PC has started up and can be operated.
Connect the receiver unit and charging cable to the receiver extension adapter and insert them into the USB-A port of your PC.
- You may use any USB-A port.
- You can also connect the receiver unit directly to your PC.
- Ensure that the connector is correctly oriented to the port.
- If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury.
- Do not touch the terminal portion of the USB connector.
- Note: When removing the receiver unit
- This product supports hot plugging. You can remove the receiver unit even when the PC is running.
The driver will be automatically installed, and you will then be able to use the mouse.
- You can now use the mouse.

Using in wired mode

Connect to a PC
- Connect the USB Type-C connector of the charging cable supplied to the USB Type-C port of this product.
Start up your PC.
- Please wait until your PC has started up and can be operated.
Connect the USB-A connector on the included charging cable to the USB-A port on your PC.
- Attention: Ensure that the connector is correctly oriented to the port.
- If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury.
- Do not touch the terminal portion of the USB connector.
The driver will be automatically installed, and you will then be able to use the mouse.
- You can now use the mouse.

You will be able to assign functions to all the buttons and setup the DPI count by installing the settings software “EG Tool”. Please continue to “ Setting up the ELECOM GAMING Tool (EG Tool)”.

Fitting the mouse feet

There are 2 mouse feet products that can be attached to the bottom of this product. (For use with the 2-Mode system, and spares for replacement).
The glide of the mouse can be adjusted to your liking by changing the area of the mouse feet.
Please peel off the blue protective film before attaching the mouse feet.
If you are concerned about wear and tear or scratches on the mouse feet resulting from the use of this product, you can maintain optimal gliding performance by replacing them with replacement feet.
Peel off the mouse feet from the groove as shown in yellow in the figure below.
ELECOM also has a lineup of replacement mouse feet that are sold separately.
Click here for the product page

Specifications

Connector type	USB Type-A plug
Connection method	Supports USB 2.4 GHz wireless or wired
---	---
Compatible models	USB port-equipped Windows PC
Radio frequency	2.4 GHz
Supported OS	Windows 10/11

Update for each new version of the OS or the installation of a service pack might be required.
Compatibility information was retrieved during operation confirmation in our verification environment. There is no guarantee of full compatibility with all devices, OS versions and applications.

Communication method| GFSK
Radio frequency| 2.4 GHz
Radio wave range| Maximum distance approximately 10 m

*May vary depending on the environment.

including wheel button

Number of wheels| 1
Receiver unit storage compartment| Supported
Power Supply (Mouse)| Built-in lithium-ion battery (rechargeable)
Battery life| Maximum duration approximately XX months (estimated operating time when using alkaline batteries)

May vary depending on the usage conditions.

Cable length| Approximately 1.5 m / 5 ft
Size category| L size
External dimensions (main unit)| Width approx. 61.2 mm × Depth approx. 121.3 mm × Height approx. 37.2 mm / W 2.4

× D 4.8 × H 1.5 in.

External dimensions (receiver)| Width approx. 13.3 mm × Depth approx. 24.0 mm × Height approx. 5.7 mm / W 0.5 × D 0.9 × H 0.2 in.
Weight (main unit)| Approximately 54 g / 1.9 oz

excluding batteries

---|---
Mass (receiver unit)| Approximately 2 g / 0.07 oz
Mass (receiver unit)| Approximately 2 g / 0.07 oz
Operating environment conditions| Temperature: 5 ℃ to 40 ℃ / 41 ℉ to 104 ℉, humidity: 90 % RH (without condensation)
Storage environment conditions| Temperature: -10 ℃ to 60 ℃ / 14 ℉ to 140 ℉, humidity: 90 % RH (without condensation)
Accessories| Charging cable (1.5 m), receiver extension adapter, mouse feet x 2 types, sticker

Compliance status

Model: M-VM610, EG01A
China
RoHS Compliance: https://www.elecom.co.jp/global/certification/pdf/RoHS_China.pdf

EU

CE Declaration of Conformity
- https://www.elecom.co.jp/global/certification/pdf/CE_DoC.pdf
RoHS Compliance
- https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf

CE Authorised representative

Amazon Services Europe S.à r.I| 38 avenue John F. Kennedy, L-1855 Luxembourg

WEEE Disposal and Recycling Information

This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE should be treated separately to prevent possible harm to the environment or human health.Consult your retailer or local municipal office for collection, return, recycle or reuse of WEEE.

CONSUMER INFORMATION ON THE SORTING RULE

https://www.elecom.co.jp/global/certification/pdf/FR-Info-Tri.pdf

Singapore

Operating Frequencies: XXXX-XXXX MHz
Maximum field intensity / RF Output power: X.XX dBm / X.XX mW

Taiwan

BSMI RoHS Compliance
- https://www.elecom.co.jp/global/certification/pdf/RoHS_Taiwan.pdf
model M-VM610: XXXXXXXXXXXXXX
model E01A: CCAH23LP5360T8

For low-power radio frequency equipment that has obtained certification, no company, firm or user may change the frequency, increase the power, or change the characteristics and functions of the original design without approval. The use of low-power radio frequency equipment must not affect flight safety or interfere with legitimate communications; if interference is found, it should be stopped immediately and improved until there is no interference before continued use. The aforementioned legal communications refer to radio communications operated in accordance with the provisions of the Telecommunications Management Act. Low-power radio frequency equipment must endure interference from electromagnetic equipment that radiates electromagnetic waves for legitimate communications or industrial, scientific and medical purposes.

UK

UK Declaration of Conformity
- https://www.elecom.co.jp/global/certification/pdf/UK_DoC.pdf
RoHS Compliance
- https://www.elecom.co.jp/global/certification/pdf/RoHS_EU_UK_Vietnam.pdf

WEEE Disposal and Recycling Information

This symbol means that waste of electrical and electronic equipment (WEEE) should not be disposed as general household waste.WEEE should be treated separately to prevent possible harm to the environment or human health. Consult your retailer or local municipal office for collection, return, recycling or reuse of WEEE.

FCC STATEMENT

US

FCC ID: YWO-M-VM610
FCC ID: YWO-E01A

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

NOTICE: The manufacture is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.

To make improvements to this product, the design and specifications are subject to change without prior notice.

FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example – use only shielded interface cables when connecting to computer or peripheral devices).

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Responsible party