Huaying SK27 Smart Watch User Manual

**Huaying SK27 Smart Watch User Manual

**

Thank you for choosing our smartwatch. By reading this manual, you can fully understand the use of the equipment, appreciate its practical functions and simple operation methods.

The company reserves the right to modify the contents of this manual without prior notice.

Product configuration: one box, one manual, one host, one charging stand. Please read this manual carefully before using the product and keep it properly.

This product supports life waterproof wear. Special attention should be paid not to wear in hot showers or saunas, as it cannot prevent water vapor; when soaking in sea water, wipe it clean and dry in time. If water enters due to not used according to the instructions, our company will not provide free warranty. After soaking in water, the speaker hole will accumulate water, please shake the water out, and the sound will return to normal.

If the power of the watch is exhausted when using the watch for the first time, please take out the charging stand, the watch will be automatically adsorbed on the charging stand, and the USB will be inserted into the adapter for charging. The input voltage of the adapter is required to be 5V1A/2A.

Product overview:

touch operation:

Connection Tutorial:

1. Download the “RDFit’ APP to your mobile phone and install it. You can directly search for “RDFit” in the APP store (Android App Store) To download, you can also scan the following QR code to jump to the link to download (you can scan the code in browsers, WeChat, etc.);

2. Connect the watch

3. Scan code connection: After the watch is turned on for the first time after leaving the factory, there will be a QR code after selecting the language. You can scan and download the APP, and use the APP to scan the connection. Connect the QR code in “Settings” “Connect Mobile Phone”; use the Android terminal APP scan code can realize one-key connection;
   

4. Manual connection: After the mobile phone turns on the BT, enter the APP to search for the device directly, find the corresponding device BT MAC address for manual connection.

5. Connect the call BT
   Slide down to open the shortcut menu, make sure that the BT switch for calls is turned on (the icon with BT on the headset in the middle of the status bar is blue), you can set it on the phone. Find the call BT in the BT (when the mobile phone BT is turned on), find the device name call to be used, and click connect. After the connection is successful, the call function and music function can be used. (Android APP scan code can be connected with one key, IOS scan code can be directly transferred to the mobile phone setting interface, and then click BT to connect manually).
   

RDFit QR code:

Android 5.0 and above and IOS9.0 and above

1. Health function introduction:
2. Heart rate:
3. Click to enter to measure the current heart rate value, it will remind you when you are in the
   air wear correctly; The heart rate data can be detected in real time on the APP on the hour, and the corresponding record is recorded in the column in the shape chart;

Connect to APP to record heart rate data synchronously;

1. Blood pressure:

blood oxygen:

1. Click to enter to test blood pressure and blood oxygen;

2. The test data will be synchronized to the APP in real time

Multi-sport mode:

1. Provide multiple sports modes for free selection;
2. Heart rate, calories and other data will be recorded during exercise;
   

Features:

1. Phone dial: After connecting the mobile phone to talk, you can call on the watch,
2. Call record: phone call record can be synchronized,
3. Contact: synchronize the contact to the watch through the address book function in the APP:
4. Compass: The compass function can be used after it is turned on.
5. Altitude: When connecting to APP, you can use the altitude function to provide the current altitude data (the GPS function of the phone must be turned on),
6. SIRI: After connecting the APP and call audio, wake up the mobile phone voice assistant through the voice assistant function of the watch.
7. Information: This function needs to be connected to the mobile phone APP “RDFit application to query the third-party program messages of the set message notification。
8. Sleep monitoring: From 1:00 every night to 8:00 the next morning, your sleep time and quality will be recorded, helping you to better adjust your work and rest time and improve sleep quality. On the sleep function interface, swipe up to enter the options to inquire about the options of the sleep function.
9. Step count: You can view the number of steps taken for the day, calorie consumption and distance traveled. At 12:00 every night, the data of the day will be saved and reset to zero. Swipe up to enter the options, set your own options.
10. Music: Can control the music of the mobile phone.
11. Calculator Simple calculations are possible.
12. Stopwatch: Turn this function on to time it.
13. Set up: Perform various local settings of the machine, including brightness settings, screen time, do not disturb mode, sound settings, language switching, mobile phone connection, watch about, shutdown, restart, factory reset, etc..
14. Weather: After connecting to the APP, the weather information of the day provided by RDFIT can be synchronized in real time:
15. Timer: Supports selecting minutes and custom time countdown.
16. Wallet: The payment code of the third-party program can be pushed through the APP;
17. ID card: The personal business card QR code of the third-party program can be pushed through the APP;
18. Female Health: women users can set their own women’s health information through the APP, and will provide health reminders according to different settings;
19. Motion track: After the motion initiated by APP is completed, the motion track and data can be synchronized to the watch.
    Functions such as long sitting reminder, water drinking reminder, address book, remote photo taking, hand raising and screen lighting can be set in the APP。

How to set up message notifications:

On the phone, go to Settings Application Management, find “RDFit” – Permission Management, and open all of them. Then enter the notification management find “RDFit” and open all permissions. Permission to run in the background, enter, select unlimited. return. It will prompt to open automatically, enter open. Go back, select the APP message notification you want, and click Open. On the IOS side, you can turn on the shared system notification in
the mobile phone settings BT connected BT settings; Note: If the computer version of the selected APP is online, the mobile phone will not receive information notifications, and the watch will not remind.

Common Troubleshooting:

1. The watch cannot be turned on: the duration of pressing the power button is too short, it takes more than 3 seconds; the battery power is too low, please use the charging cable to charge;
2. The watch cannot be charged normally: whether the charging contacts are in normal contact with the watch, and whether the charger is normal; when the battery is too low, it takes a while to charge before the charging interface is displayed;
3. Software problems can be solved by restoring the factory function;

Warranty Description:

1. During normal use of this product, if there are product quality problems caused by manufacturing, materials, design, etc., from the date of purchase, the motherboard will be guaranteed for one year free of charge, and the battery and charger will be guaranteed for half a year.
2. The failure caused by the user’s personal reasons does not provide free warranty, as follows:
3. Damage caused by unauthorized disassembly, modification of watches, etc.;
4. Injury caused by accidental falling during use;
5. All man-made damage or third-party negligence, misuse (such as: water in the host,
6. external force cracking, scratch damage to peripheral components, etc.), are not covered by the warranty.
7. When requesting a free warranty, please provide a warranty card with the date of purchase and the stamp of the place of purchase.
8. All the functions of the product are based on the physical object.

Date of purchase: Customer signature:
MAC code: Clerk signature:
Buy store: Shop stamp:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirement in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>