G3 FERRARI G50044 Table Fan User Manual
- June 15, 2024
- G3 FERRARI
Table of Contents
G50044 Table Fan
User Manual
G50044 Table Fan
PROTECTION CLASSES
WARNING
ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE
This symbol warns the user that un-insulated dangerous voltage inside the
system may causean electrical shock. Do not open the case.
Class II Appliance symbol. The double insulated electrical appliance is
one which has been designed in such a way that it does not require a safety
connection to electrical earth/ground.
Caution: this symbol reminds the user to read carefully the important
operations and maintenance instructions in this owner’s guide.
SAFETY INSTRUCTIONS
The following are important notes on the installation, use and maintenance;
save this instruction manual for future reference; use the equipment only as
specified in this guide; any other use is considered improper and dangerous;
therefore, the manufacturer cannot be held responsible in the event of damages
caused by improper, incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in doubt, do not attempt to
use it and contact the authorized service center; do not leave packing
materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within
the reach of children as they are potential sources of danger; always remember
that they must be separately collected. Make sure that the rating information
given on the technical label are compatible with those of the electricity
grid; the installation must be performed according to the manufacturer’s
instructions considering the maximum power of the appliance as shown on the
label; an incorrect installation may cause damage to people, animals or
things, for which the manufacturer cannot be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions,
use only those that comply with current safety standards; in any case do not
exceed the power consumption limits indicated on the electrical adapter and /
or extensions, as well as the maximum power shown on multiple adaptor.
Do not leave the unit plugged; better to remove the plug from the mains when
the device is not in use. Always disconnect from power supply if you leave it
unattended.
Cleaning operations should be carried out after unplugging the unit.
If the unit is out of order and you do not want to fix it, it must be made
inoperable by cutting power cord.
- Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
- Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.
- Always store it in a dry place.
- Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc..
- This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of the appliance in a safe way and understand hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.
- Children must not play with the appliance.
- Keep the appliance and its cord out of reach of children less than 8 years.
If the power cord is damaged, or in case of failure and / or malfunction do not tamper with the unit. The reparation must be done by manufacturer or by service center authorized by the manufacturer in order to prevent any risk. Failure to comply with the above may compromise the unit safety and invalidate the warranty.
- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.
- The appliance is not intended to be operated by means of an external timer or separate remote-control system.
- Before every use, unroll the power cord.
- Use original spare parts and accessories only.
- Do not subject the product to strong impacts, serious damages may result.
GENERAL INFORMATION
Do not connect the electric plug since the installation is not complete. Do
not leave the appliance unattended while it is running. Unplug after each use.
Unplug the unit by pulling the plug and not the power cord. Do not immerse
product in water or other liquids and avoid splashing liquids reach the unit.
Before carrying out any cleaning, disconnect the unit from the electrical
outlet.
Before each use, unroll the power cord. Do not insert anything through the
protection grids.
Do not obstruct in any way the protection grids. Place on solid and stable
surfaces and away from windows or drafts.
DESCRIPTION G50044
- Front protection grid
- Fan stopper
- Fan
- Rear fan stopper
- Rear protection grid
- Drive shaft
- Oscillation pin
- Main body
- Inclination pin
- Control panel
- Detachable base
- Motor protection
- Front grid fixing screw
ASSEMBLING
The fan motor can work even if the protective grids have not yet been assembled and fixed. To ensure the maximum safety, perform the installation completely before operating.
- Insert the power cord in the hole of the detachable base.
- Insert the lower part of the housing in the hole of the base (1). Rotate clockwise until lock.
- Place the rear grid (5) near the plastic motor protection (12) with the metal handle facing upwards. Fit the holes present in the central part of the grid with the pins in the plastic protection (12) and lock the two parts with the stopper Insert the fan (3) into the shaft (6) and screw the cover of the fan (2) to the threaded end of the drive shaft. Remove the fixing screw (13).
- Place the front grid (1) in front of the rear grid (5) matching the holes on the grids.
- Close the locking pins and fasten the two grids tightening the securing screw (13) previously removed.
OPERATING
Once finished assembling the unit, place the fan following the safety instructions, then plug it to the electrical outlet. By using the control panel (10) the rotation power can be adjusted on different speeds. 0: fan is OFF
- low speed
- medium speed
- high speed
OSCILLATION
The oscillation of the head is only possible when the fan is turned on and it
can be activated by pressing the pin (7) downwards until it locks. Lifting the
pin (7) until the locking function is disabled. It is recommended to enable or
disable oscillation of the fan only when the unit is off.
CLEANING
Disconnect the plug from the electrical outlet before attempting any cleaning
operation. Do not immerse the unit in water. In any case prevent splashes of
water or other liquids reaching the motor body. Do not clean the unit with
metallic sponges or abrasive cleaners, only use neutral detergents and a soft
cloth moistened with water to clean the outer parts. Dry the product
completely before operating the unit.
TECHNICAL FEATURES
- Power supply: AC 230V~50Hz. Power 45W
- Fan diameter: 40cm
- 3 operation speeds – Oscillation
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances
if not properly disposed of; other parts can be recycled. It’s our duty to
contribute to the ecological health of the environment following the correct
procedures for disposal. The crossed out wheelie bin symbol indicates the
product complies with the requirements of the new directives introduced to
protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and
must be properly disposed at the end of its lifetime. If you need further
information, ask for the dedicated waste disposal areas at your place of
residence. Who does not dispose of the product as specified in this section
shall be liable according to the law.
To find the nearest service center, please call the telephone number 0541
694246, fax number 0541 756430 or contact us at
assistenzatecnica@trevidea.it asking
for the service centers supervisor.
Appliance is conform to the pertinent European regulation andis therefore
marked with the CE mark.
www.g3ferrari.it
TREVIDEA S.r.l.
TREVIDEA S.R.L. – Strada Consolare Rimini – San Marino n. 62 – 47924 – RIMINI
(RN) – ITALY
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>