ASUS RT-AX86U Pro Wireless-AX5700 Dual-Band Gigabit Router User Guide
- June 4, 2024
- Asus
Table of Contents
RT-AX86U Pro Wireless-AX5700 Dual-Band Gigabit Router
User Guide
Hardware Explanations
Specifications:
DC Power adapter| DC Output: +12V with 3.0A current /DC Output: +19.5V with
2.31A current
---|---
Operating Temperature| 0~40oC| Storage| 0~70ºC
Operating Humidity| 50~90%| Storage| 20~90%
One Router Setup Steps
Prepare your Modem
-
Unplug the power of the cable / DSL modem. If it has a battery backup, remove the battery.
-
Connect your modem to the WAN port at the back side of the router with the network cable provided.
-
Power on the modem. Plug the modem into the power outlet and power it on.
-
Check the modem LED lights to ensure the connection is active.
If you are using DSL for the
internet, you will need your username/password from your Internet service
provider (ISP) to properly configure your router.
Install your Router
-
Plug the adapter into the DCIN port, and press the Power switch.
-
The power LED will light up when the hardware is ready. – Via app
-
[App] On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app.
https://play.google.com/store/apps/details?id=com.asus.aihome&hl=enC
http://itunes.apple.com/app/asus-router/id1033794044 -
[App] On your iOS or Android mobile device, tap Settings > Wi-Fi, and connect to the default network SSID shown on the product label on the back side of the router. Or scan the QR code on the product label to connect the default network SSID.
* XX refers to the last two
digits of the MAC address. You can find it on the label on the back of your
router -
[App] Launch ASUS Router App and follow the instructions to complete the setup.
Or via a web browse
[Wired] Connect your PC to the LAN port at the back side of the router
using an additional network cable.
[Wireless] Connect to the network with the default SSID shown on the product label on the back side of your router “ASUS_XX”.
4 [Wired / Wireless] Open a web browser.
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com. Follow the instructions to
complete the setup.
2.5G Port WAN Type Setup Steps
01 Prepare your Router
Connect the modem to the 2.5G port with a network cable.
02 Login and Connect – Setting to 2.5G WAN under factory default settings
-
[ASUS Setup Wizard] Select “manual setting”.
-
[ASUS Setup Wizard] Select “2.5G Ethernet”, then follow the instructions to complete the setup of SSID and login information.
– Switching from 1G WAN to 2.5G WAN
- [Dashboard] Go to Dashboard and open the “WAN” setting.
- [Dashboard] Choose “2.5G WAN” as the primary WAN, then apply the setting.
03 Start to Use
- After following the setup steps, the router will reboot for a second and start to connect to the Internet with a 2.5G port.
FAQ FREQUENTLY ASKED QUESTIONS
Q1: Where can I find more information about the wireless router?
Technical support site: https://www.asus.com/support
Service and Support
Video Tutorials
https://qr.asus.com/wl_videotutorials
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for detailed recycling information
in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products on the ASUS REACH website at
http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirements,
please follow operation instructions as documented in this manual. This device
is restricted to indoor use.
WARNING! This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 51cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter
This device is restricted for indoor use.
Compliance Statement of Innovation, Science and Economic Development Canada
(ISED)
This device complies with the Innovation, Science and Economic Development
Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the
potential for harmful interference to co-channel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)
Radio Frequency (RF) Exposure Information
The radiated output power of the ASUS Wireless Device is below the Innovation,
Science, and Economic Development Canada radio frequency exposure limits. The
ASUS Wireless Device should be used in such a manner that the potential for
human contact during normal operation is minimized.
This equipment should be installed and operated with a minimum distance of
31cm between the radiator and any part of your body.
This device has been certified for use in Canada. Status of the listing in the
Innovation, Science, and Economic
Development Canada’s REL (Radio Equipment List) can be found at the following
web address:
http://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the
following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
This radio transmitter [3568A-RTAXI600] has been approved by Innovation,
Science and Economic Development Canada to operate with the antenna types
listed below, with the maximum permissible gain indicated. Antenna types not
included in this list that have a gain greater than the maximum gain indicated
for any type listed are strictly prohibited for use with this device.
| Ant. | Brand | P/N | Type | Antenna Gain (dBi) |
|---|---|---|---|---|
| 1 | WHA YU | C660-510490-A | Dipole | 2.4GHz |
5GHz Band 4
2| 1.66| 1.86| 1.86| 1.9| 1.84
3
4| WHA YU| C660-510579-A| PCB| –| 2.9| 2.9| 3| 2.52
The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek to service if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazards, disconnect the power cable from the electrical outlet before relocating the system.
- DO NOT mount this equipment higher than 2 meters.