PXN V10 3 In 1 Steering Wheel User Manual

PXN V10 3 In 1 Steering Wheel

INTRODUCTION

Thank you for choosing PXN products and your support for our brand, please read this manual carefully before starting to enjoy your gaming experience.

APPEARANCE

PRODUCT CONTENT

| | |
---|---|---|---
Steering wheel fixed bracket *2*| Steering wheel power adapter 1
Steering wheel power cable 1| Foot pedal cable with registered jack 1
Foot pedal USB cable 1| Allen screw 4**
Allen key *1

SYSTEM REQUIREMENTS

Supported platforms : PC / PS4 / X-ONE / X-Series X|S Compatible computer operating systems : Windows 7 / 8 / 10 / 11
Note: Original controller should be used for guidance while playing on PS4 and X-ONE / X-Series X|S platforms.

BACK INTERFACE OF THE STEERING WHEEL

Back Interface Connection Diagram

STEERING WHEEL INSTALLATION INSTRUCTION

• Assembling of Panel and Base
  Step 1 Align the panel with the panel mounting position of the base, hold the steering wheel dial, and tighten the locking ring.

• Steering Wheel Fixed Instruction
  Step 1 Put the steering wheel base in a proper position and install the clamp.
  
  Step 2 Use an Allen key to tighten the screws on the clamp to lock the clamp.
  

• Steering Wheel Tilt Adjustment Instruction
  When in use, you can set the inclination of the steering wheel base with 4 gears.
  Step 1 Use an Allen key to remove the screws shown in the figure.
  
  Step 2 Adjust the inclination of the base to the corresponding hole position and tighten the screws.
  

FOOT PEDALS INSTALLATION INSTRUCTION

• Panel Angle Adjustment of Foot Pedal
  Step 1 Use an Allen key to loosen and remove the 2 Allen screws.
  
  Step 2 Adjust the pedal to the desired angle, install and tighten the 2 Allen screws.
  
  

• Pedal Strength Adjustment Instruction
  Step 1 Rotate the parts shown in the figure to adjust the pedal strength.
  Note: Please adjust the parts within the thread range.
  
  

• Foot Pedal Fixed Instruction
  Step 1 There are 4 screw holes reserved at the bottom of the foot pedal to fix the pedal to the bracket by combining the corresponding screws.
  

INSTRUCTION FOR PLAYING ON PC

Step 1 Connect the gear shift and foot pedals to the steering wheel.
Step 2 Fix the steering wheel and connect it to the power adapter.
Step 3 Plug the USB main cable of the steering wheel to the PC.
Step 4 The steering wheel will be in D-input mode by default if successfully connected, and the red indicator on the steering wheel will be always on.

Mode Switch While Playing on PC
The steering wheel is in D-input mode by default. Press the button for 3 seconds to switch to X-input mode and a purple indicator will be always on if successfully switched.

D-input mode supports force feedback function (requires the game to support force feedback) Recommended games: Euro Truck Simulator 2, Forza Horizon 5, Assetto Corsa: Racing, Dirt Rally 2.0, F1 2020.
No forceback feedback function in X-input mode Recommended games: Forza Horizon 4 (Steam version), Spintires: Snowrunner,
Need for Speed: Heat Pursuit.

INSTRUCTION FOR PLAYING ON PS4

Step 1 Connect the gear shift and foot pedals to the steering wheel.
Step 2 Securely install the steering wheel and connect to the power adapter.
Step 3 Turn off the PS4 original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.
Step 4 Plug the USB main cable of the steering wheel into the USB port of the PS4 host, cand turn on the PS4 host.
Step 5 Press the button of the steering wheel and the blue indicator of the steering wheel will be always on if connected successfully.

INSTRUCTION FOR PLAYING ON X-ONE/ X-SERIES X S

Step 1 Connect the gear shift and foot pedal to the steering wheel.
Step 2 Fix the steering wheel and connect it to the power adapter.
Step 3 Turn off the X-ONE / X-Series X|S original controller and use the USB data cable to connect the controller to the controller interface of the steering wheel.
Step 4 Plug the steering wheel USB main cable into the USB port of the X-ONE / X-Series X|S host and power on the X-ONE/ X-Series X|S host.
Step 5 Press the button of the steering wheel and the green indicator will be always on.

STEERING WHEEL ADVANCED SETTINGS

Download the [PXN Wheel] APP on your mobile phone to get the advanced settings of the steering wheel.
Main Functions of the APP:

• Steering effective rotation degree setting
• Force feedback setting
• Button mapping setting
• Game preset button configuration
• Steering wheel button test
  Scan the QR code to download the APP
  

PRECAUTIONS

• Please read the manual carefully before using.
• Avoid strong vibration and gravity drop.
• Do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from getting into the product to avoid damage.
• Avoid storing products in some places with humid, high temperature,oily smoke, etc.
• Please use proper power while connecting and removing devices to avoid damage.
• Children can only use this product under the supervision of an adult.

PRODUCT SPECIFICATIONS

(while using the original controller for guidance)
Package Size| About 435 355 370 mm
Product Size| About 270 280 249 mm (Steering wheel) About 410 * 340

• 220 mm (3 Foot pedals) About 180 105 200 mm (Gear shift)
  Product Weight| About 2940 g (Steering wheel) About 3180 g (3 Foot pedals) About 577g (Gear shift)
  Operating Temperature| 10-40 ℃
  Operating Humidity| 20～80 %

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>