tuya 52 Inch Smart WiFi Walnut Finish Wave Ceiling Fans User Guide

tuya 52 Inch Smart WiFi Walnut Finish Wave Ceiling Fans

Product Information

Specifications:

• Connectivity: Bluetooth, WLAN

Product Usage Instructions

Step 1: Download and Install the App

1. Search and download the Tuya Smart app from the App Store, or Google Play, or scan the provided QR code.
2. Install the app on your device.

Step 2: App Setup

1. Open the Tuya Smart app.
2. If you already have an account, log in. Otherwise, create a new account by following the prompts.

Step 3: Device Setup

1. Ensure your device is powered on and in pairing mode.
2. In the Tuya Smart app, click on “Add Device”.
3. Wait for the app to search for available devices. This may take a few moments.
4. Once your device is found, click on it to start the pairing process.

Step 4: Pairing Process

1. Follow the on-screen instructions to complete the pairing process.
2. Enter any required user information, such as username and password.
3. Wait for the pairing process to complete. This may take a few seconds.
4. Once the pairing is successful, you will receive a confirmation message.

Step 5: Device Control

1. Once your device is paired and connected, you can use the Tuya Smart app to control its features and settings.
2. Explore the app interface to access all available controls and functionalities.

FAQ:

• Q: How do I download the Tuya Smart app?
  A: You can download the Tuya Smart app from the App Store for iOS devices or Google Play for Android devices. Alternatively, you can scan the provided QR code to directly access the app download page.

• Q: Do I need an account to use the app?
  A: Yes, you need to create an account in the Tuya Smart app to fully utilize its features and connect your device.

• Q: How long does the pairing process take?
  A: The pairing process usually takes a few seconds. However, it may vary depending on the device and network conditions.

Download The Application

1. Search and download “Tuya Smart” in the App Store, Google Play, or scan QR.

Install and open the app

Open your App account.

Create a new account:

• input your mobile number or email address.
• click to get the verification code (check your mailbox).
• input the verification code.
• set login password.
• accept the permissions.
• you have your account created.

Turn on Bluetooth and WiFi, and connect WiFi (Note: WiFi can only use a 2.4G router)

Link the ceiling fan

Open the App, then turn on the power supply of the fan controller and press and hold the “6h” button of the remote control handle for about 5 seconds within 10 seconds after the fan is powered on. At this time, click Add device in the App main interface, the light will flash and the connection icon of the fan will appear on the App interface. Next, click the “Add device” button. Then you can enter the mobile phone control interface to control the fan (Note: When Bluetooth matches, the fan motor cannot work).

NOTES

1. Please check whether the WIFI account and password information are correct.
2. Reducing the distance between mobile phones, routers, and fan receivers can connect faster, otherwise, it may cause connection failure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>