ECO-WORTHY 7HO86 Single Circuit ON OFF Battery Disconnect Switch Instruction Manual

June 15, 2024
ECO-WORTHY

**ECO-WORTHY 7HO86 Single Circuit ON OFF Battery Disconnect Switch Instruction Manual


**

Features

  • Switches a single battery to a single load group
  • Tin-plated copper studs for maximum conductivity and corrosion resistance
  • Studs accept 3/8M (M10) ring terminals
  • One-piece terminal stud design never loosens over time
  • Isolating cover with three snap-off side pieces protects rear contacts and allows wire access in any direction

Specifications

Cranking Rating: 30 sec.: 900ADC
Intermittent Rating: 5 mm.: 500ADC
Continuous Rating: 300A
DC Terminal Stud, Tin-Plated Copper: 318″-16 (M10)
*Torque 120 in-Ib (13.56 Nm) Cable Size to Meet Ratings: 4/OAWG (120 mm2)
Maximum Voltage Rating:** 48 Volts DC

Ignition Protected

Regulatory

  • CE, RoHS, ISO 8846
  • Meets all American Boat and Yacht Council (ABYC) requirements for battery switches
  • Meets UL 1500 and SAE J1171 external ignition protection requirements
  • IP66 — protected against powerful water jets
    Regulatory Instruction

Caution

  • Disconnect positive battery terminal before installing.
  • Consult electrical professional for proper wiring appli- cation.

Installation

  • Refer to the latest edition of NFPA 302 andlorABYC Eli Standard for installation information.
  • Attach one 410 AWG cable per terminal to meet ratings.
  • Battery cable terminals must be attached under nut and lock washer.
    Torque 120 in-lb (13.56 Nm).

Operation

  • Turn all appliances off before turning the battery switch to OFF.
  • Do not switch to OFF while engine is running.

Battery Switch Dimensions

Battery Switch Dimensions

Tel: +44 20 7570 0328(EU) 1-866-939-8222(US)

E-mail: customer.service@eco-worthy.com
Web: www.eco-worthy.com

ECO-WORTHY Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals