SUNNY HEALTH FITNESS SF-E320047 Elite Interactive Series Exercise Elliptical User Manual

ELITE INTERACTIVE SERIES
EXERCISE ELLIPTICAL
SF-E320047
USER MANUAL

SF-E320047 Elite Interactive Series Exercise Elliptical

IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).

![SUNNY HEALTH FITNESS SF-E320047 Elite Interactive Series Exercise Elliptical

• icon1](https://manuals.plus/wp-content/uploads/2023/12/SUNNY-HEALTH-FITNESS- SF-E320047-Elite-Interactive-Series-Exercise-Elliptical- icon1.jpg)WWW.SUNNYHEALTHFITNESS.COM

IMPORTANT SAFETY INFORMATION

We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 275 pounds (125 KG).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required.
12. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot, or damp areas as this may lead to corrosion and other related problems.
13. This equipment is designed for indoor and home use only; it is not intended for commercial use.

PRE-ASSEMBLY CHECK LIST

Before you start to assemble, please make sure all parts are included

HARDWARE PACKAGE

![SUNNY HEALTH FITNESS SF-E320047 Elite Interactive Series Exercise Elliptical

• parts1](https://manuals.plus/wp-content/uploads/2023/12/SUNNY-HEALTH- FITNESS-SF-E320047-Elite-Interactive-Series-Exercise-Elliptical- parts1.jpg)Ordering Replacement Parts (U.S. and Canadian Customers only)
  Please provide the following information in order for us to accurately identify the part(s) needed:
  The model number (found on cover of manual)
  The product name (found on cover of manual)
  ****The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near on the page17-21)

Please contact us at support@sunnyhealthfitness.com or 1- 877 – 90SUNNY (877-907-8669)

ASSEMBLY INSTRUCTIONS

We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
STEP 1:
Unscrew 4 Screws (No. 70) from Main Frame (No. 1) with Allen Wrench (No. 121). Remove 4 Plastic Washers (No. 119) and 2 Shipping Tubes (No. 120) from Main Frame (No. 1).
You may save these parts Screws (No. 70), Plastic Washers (No. 119),Shipping Tubes (No. 120)in case you would like to repackage and transport this equipment in the future. STEP 2:
Attach the Front Stabilizer (No. 2) and Rear Stabilizer (No. 3) to the Main Frame (No. 1) with 4 Bolts (No. 67) and 4 Washers (No. 45). Tighten and secure with Allen Wrench (No. 121). STEP 3:
Remove 6 Screws (No. 70), 4 Washers (No. 45), 2 Big Arc Washers (No. 25) and 6 Spring Washers (No. 17) from the Main Frame (No. 1) with Allen Wrench (No.121).
CAUTION: Please make sure the Tension Control Knob (No. 75) is at the lowest resistance level (level 1, all the way to the left) before you connect any wires together.
Attach the Tension Control Wire (No. 75a) into the metal bracket of Tension Wire (No. 71) as shown in drawing A. Then, pull Tension Control Wire (No. 75a) upward and insert it into the slot of metal bracket of Tension Wire (No. 71) as shown in drawing B. Make sure the metal fitting on Tension Control Wire (No. 75a) is secured in the metal bracket.
Connect the Extension Sensor Wire (No. 73) with Sensor Wire (No. 72). Insert the connecting wires into Front Post (No. 4).
Attach the Front Post (No. 4) to the Main Frame (No. 1) with 6 Screws (No. 70), 4 Washers (No. 45), 2 Big Arc Washers (No. 25) and 6 Spring Washers (No. 17) that were removed. Tighten and secure with Allen Wrench (No. 121).
NOTE: Be careful not to pinch any wires when attaching Front Post (No. 4) to Main Frame (No. 1). STEP 4:
Attach the Left Decorative Cover (No. 63) and Right Decorative Cover (No. 64) to the Main Frame (No. 1) with 4 Screws (No. 42). Tighten and secure with Spanner (No. 123). STEP 5:
Remove 2 Bolts (No. 31), 2 Spring Washers (No. 17), 2 Big Washers (No. 32) and 2 Wave Washers (No. 34) from the Front Post (No. 4) with Spanner (No. 123).
Attach the Left Swing Rod (No. 5) onto the left horizontal axis of the Front Post (No. 4) with 1 Bolt (No. 31), 1 Spring Washer (No. 17), 1 Big Washer (No. 32) and 1 Wave Washer (No. 34) that were removed. Tighten and secure with Spanner (No. 123).
Attach the U Bracket (No. 54) on the Left Foot Bar (No. 7) to the Left Crank (No. 89) with 1 Left Pedal Bolt (No. 57), 1 Wave Washer (No. 58). Turn the Left Pedal Bolt (No. 57) counter-clockwise as tightly as you can with your hand. Secure by tightening 1 Spring Washer (No. 59) and 1 Left Nylon Nut (No. 60) clockwise. Then use Allen Wrench (No. 122) and Spanner (No. 124) to tighten securely.
Attach the Right Swing Rod (No. 6) onto the right horizontal axis of the Front Post (No. 4) with 1 Bolt (No. 31), 1 Spring Washer (No. 17), 1 Big Washer (No. 32) and 1 Wave Washer (No. 34) that were removed. Tighten and secure with Spanner (No. 123).
Attach the U Bracket (No. 54) on the Right Foot Bar (No. 8) to the Right Crank (No. 90) with 1 Right Pedal Bolt (No. 61), 1 Wave Washer (No. 58). Turn the Right Pedal Bolt (No. 61) clockwise as tightly as you can with your hand. Secure by tightening 1 Spring Washer (No. 59) and 1 Right Nylon Nut (No. 62) counter-clockwise. Then use Allen Wrench (No. 122) and Spanner (No. 124) to tighten securely. STEP 6:
Attach the Left Pedal (No. 48) to the Left Foot Bar (No. 7) with 2 Bolts (No. 47), 2 Washers (No. 45) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123).
Attach the Right Pedal (No. 49) to the Right Foot Bar (No. 8) with 2 Bolts (No. 47), 2 Washers (No. 45) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123).
Attach the Left Foot Bar Cover-A (No. 38) and Left Foot Bar Cover-B (No. 39) to the Left Foot Bar (No. 7) with 3 Screws (No. 42). Tighten and secure with Spanner (No. 123).
Attach the Right Foot Bar Cover-A (No. 40) and Right Foot Bar Cover-B (No. 41) to the Right Foot Bar (No. 8) with 3 Screws (No. 42). Tighten and secure with Spanner (No. 123). STEP 7:
Attach the Left Handlebar (No. 9) to the Left Swing Rod (No. 5) with 2 Bolts (No. 24), 2 Big Arc Washers (No. 25) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123).
Attach the Right Handlebar (No. 10) to the Right Swing Rod (No. 6) with 2 Bolts (No. 24), 2 Big Arc Washers (No. 25) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123). STEP 8:
Attach the Left Swing Rod Cover-A (No. 27) and Left Swing Rod Cover-B (No. 28) to the Left Swing Rod (No. 5) by hand.
Attach the Right Swing Rod Cover-A (No. 29) and Right Swing Rod Cover-B (No. 30) to the Right Swing Rod (No. 6) by hand. STEP 9:
Attach the Middle Handlebar (No. 11) to the Front Post (No. 4) with 2 Bolts (No. 18) and 2 Spring Washers (No. 17). Tighten and secure with Allen Wrench (No. 121).
Attach Clamp Cover (No. 19) to the Middle Handlebar (No. 11) by hand. STEP 10:
Remove 4 Screws (No. 21) from the back of the Computer (No. 20) with the Spanner (No. 123).
Connect the Extension Sensor Wire (No. 73) with Computer Wire (No. 20a). Then insert them into the Front Post (No. 4).
Insert the Handle Pulse Wire (No. 14a) into the Pulse Input jack on the back of Computer (No. 20).
Attach Computer (No. 20) to the top end of the Front Post (No. 4) with 4 Screws (No. 21) that were removed. Tighten and secure with Spanner (No. 123). STEP 11:
Attach Bottle Holder (No. 74) to the Front Post (No. 4) with 2 Screws (No. 21).
Tighten and secure with Spanner (No. 123).
The assembly is complete!

BATTERY INSTALLATION & REPLACEMENT

BATTERY INSTALLATION

1. Take out 2 AA batteries from computer box.
2. Press the buckle of battery cover on the Computer (No. 20), then remove battery cover.
3. Install 2 AA batteries into the battery case on the back of the Computer (No. 20). Pay attention to the battery + and – poles before installing.
4. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 20).

The installation is complete!
BATTERY REPLACEMENT

1. Press the buckle of battery cover on the back of the Computer (No. 20), then remove battery cover.
2. Remove the 2 old AA batteries in the battery case and install 2 new AA batteries into the battery case on the back of the Computer (No. 20). Pay attention to the battery + and – poles before installing.
3. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 20).

The replacement is complete!
BATTERY DISPOSAL
Dispose the batteries according to the laws and regulations of your local region. Some batteries may be recycled. When disposing or recycling, do not mix battery types.

ADJUSTMENTS GUIDE

| MOVING THE ELLIPTICAL BIKE
Press the Middle Handlebar (No. 11) and tilt the elliptical bike until the Transportation Wheels (No. 69) touch the ground. Now you can transport the elliptical bike to the desired location with ease.
---|---
| ADJUSTING THE BALANCE
In order to achieve a smooth and comfortable ride, you must ensure that the elliptical bike is stabled and secured. If you notice that the elliptical bike is  unbalanced during use, you should adjust the Adjustable End Caps (No. 65) located  on the front and rear stabilizers until the elliptical bike becomes levelled with the  floor surface.
| ADJUSTING THE TENSION
Adjust the tension by rotating the Tension Control Knob (No. 75) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 75) counter-clockwise to decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level 12 being the highest.

CLEANING
The elliptical bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical bike after each use. Be careful not to get excessive moisture on the computer display panel as this might cause electrical hazard or electronics to fail. Please keep the elliptical bike, especially the computer, out of direct sunlight to prevent screen damage. Please inspect all assembly bolts and pedals on the elliptical bike for proper tightness every week.

STORAGE
Store the elliptical bike in a clean and dry environment, away from children.

EXERCISE COMPUTER

FUNCTION BUTTONS

MODE

1. Press the button to select hour, minute, year, month and date for setting.
2. Press the button to select TIME, DISTANCE, CALORIES and PULSE to preset.
3. Press the button for selection function display on main LCD, or enter after setting.
4. Press the button to confirm setting value of gender, age, height and weight.
5. Press the button and hold for 2 seconds to reset all value to zero.
   (When the user replace batteries, all the values will reset to ZERO automatically.)

SET

1. To set up the hour, minute, year, month and date.
2. To set up the target value of Time, Distance, Calories and Pulse. You can hold the button to increase the value fast. (The computer has to be in stop condition.)
3. To set up the personal data of gender, age, height and weight for Body fat test.

RESET
Press the button to reset function value when setting.
(When the user replace batteries, all the values will reset to ZERO automatically.)

BODY FAT
Press this button to enter Body Fat measure function, then press MODE key to enter the setting Mode of your personal data of Gender, Age, Height and Weight. After finished setting, press it again to measure your Body fat ration (FAT%) and BMI.

RECOVERY
To act the heart rate recovery function after pulse signal in. Press any button to return to the main display.

FUNCTIONS
SCAN
Automatically scan through each mode in sequence every 6 seconds. The display loop is RPM
Speed – Time – Distance – Calorie – Pulse on the main screen.

TIME
Accumulates total time from 00:00 up to 99:59. The user may preset target time by pressing SET &MODE button. Each increase is 1 minute.

RPM
Displays the Rotation per Minute (RPM). The RPM and SPEED will switch to another display in every 6 seconds after exercise starts.

SPEED
Displays current training speed. Maximum speed is 99.9 km/h or mile/h.

DISTANCE
Accumulates total distance from 0.00 up to 99.99 km or mile. The user may preset target Distance data by pressing SET & MODE button. Each increase setting is 0.5 km or mile.

CALORIES
Accumulates calories consumption during training from 0 to max. 999 calories. The user may also preset the target calorie before training by press SET & MODE button. Each setting  increase is10 cal.
Note : This data is a rough guide for comparison of different exercise sessions which can not be used in medical treatment.

PULSE
The monitor will display the user’s heart rate in beats per minute during training. You may set the target heart rate by press the SET & MODE button.

CALENDAR
The monitor will display date, month, and year when the monitor is in sleep mode.

CLOCK
The monitor will display current clock time when the monitor is in sleep mode.

TEMPERATURE
Displays current room temperature from 10 ℃ to 60 ℃when the monitor is in sleep mode.

OPERATION ORDER:

1. Power on – Installs 2 pieces of 1.5V UM-3 or AA batteries. The monitor start to segment test with a long beep sound. (Whenever batteries are removed, all the functions values will be reset to zero or default value.)
2. Set current data – Press the SET and MODE buttons to set up current clock time, year, month, and date. After the first setting till batteries be replaced next time, those preset data will be updated automatically.
3. Select and preset target value – Get access to the setting function of Time, Distance, Calories and Target Pulse. When you are in each setting mode. For instance the Time setting, when the time value is glitter, you can press the SET button to adjust the value. Press the MODE button for confirmation and skip to next setting. The setting of Distance & Calories is the same as Time setting.
4. After entering speed signal, each function of SPEED-RPMTIME-DISTANCE-CALORIES-PULSE will skip to display in every 6 seconds.
5. You can also press the MODE button to select single function display on the main screen except RPM & SPEED. The RPM & SPEED function will switch display in 6 seconds.
6. If you have preset any function target before, the function starts to count down from the target when the training starts. Once the target is achieved, the monitor will beep and the function will count up from zero automatically if the training is still going.
7. Pulse measurement – After you hold on two handgrip sensors in a few seconds, the monitor will show up your current heart rate in beats per minute. To ensure the heart rate readout precisely, please do not hold one hand only. You may preset target pulse before training starts. Once your current heart rate is achieved to the target, the value of pulse will beep to remind you.
8. Recovery –When the PULSE is working, you can press “RECOVERY” button to start the recovery test function. The monitor will count down from 0:60 second to 0:00 and the heart beat symbol will be glitter till counting down to “0:00”. During 60 seconds counting period, please keep heart rate sensor is attached. Then the screen will display “F1 to F6” to show your recovery status. F1 is the best, and the F6 is the worst. You may keep exercising to improve your heart rate recovery status, and check it by using Recovery function.
9. Body Fat –
   a) Press BODY FAT key to enter body fat measurement.
   b) Press MODE and SET buttons to input your personal data. Each personal data available setting area is described as the following:
   c) AGE: 10 ~ 99 years HEIGHT: 100 ~ 250 cm (or 3’03” ~ 8’02“)
   WEIGHT: 10 ~ 200 kg (or 22 ~ 440 lb)
   d) After all personal data have been input, you can press BODY FAT button and hold on grip conductors to start the body fat testing.
   e) It takes few seconds to test the body fat. If you did not hold on the conductor during the testing procedure, the LCD will show the error sign Err after 10 seconds period.
   f) After the testing is finished, you will see fat advice in percentage and BMI figure (body mass Index) display on the main LCD in sequence by scan mode.
   g) BODY FAT % : Calculate from your personal data to show the value from 5%~50%.
   h) BMI : Calculate from your personal data to show the value from 1.0~99.99.
   i) Press any key to return to the main display.

Note

1. Stop training for 4 minutes, the screen will show up room temperature, clock, and calendar display automatically.
2. If the computer displays abnormally, please re-install the battery and try again.
3. Battery Spec: 1.5V UM-3 or AA (2PCS).

APP CONNECTION:

1. Scan the QR code below to download the SunnyFit app onto your mobile device.
   ![SUNNY HEALTH FITNESS SF-E320047 Elite Interactive Series Exercise Elliptical

• QR code](https://manuals.plus/wp-content/uploads/2023/12/SUNNY-HEALTH- FITNESS-SF-E320047-Elite-Interactive-Series-Exercise-Elliptical-QR- code.jpg)https://sunnyhealthfitness.com/app/

  2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in.

  3. Ensure that the Bluetooth function is turned on from your mobile device.

  4. To connect the equipment to the SunnyFit app:
     a. From the “Workout” tab, press on the “Search” button to search for your equipment.
     b. Once your equipment appears on the list, tap the “Select” button to confirm.
     c. Note: If your equipment does not appear on the “Searching for Equipment” list, check the EXERCISE COMPUTER on your equipment to ensure that it is not in sleep mode and your phone’s Bluetooth function is on, then tap “Retry” to search again.
     d. Once your equipment shows up on the “Workout” tab as “Currently Selected”, your equipment is now ready to display, track, and record your equipment’s workout stats on the app!

  5. If you are unable to replicate these steps, or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com, or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”).

TROUBLESHOOTING

the wire from the computer is properly connected to the wire that comes from the front post.
2. Check if the batteries are correctly positioned and battery springs are in proper contact with batteries.
3. The batteries in the computer may be unresponsive. Change to new batteries.
The elliptical bike wobbles when in use.| Tum the adjustable end caps on the front and rear stabilizers as needed to level the elliptical bike.
The elliptical bike makes squeaking noise when in use.| Some bolts on the elliptical bike might have become loose. Please inspect all the bolts and tighten any loosened bolts.

EXPLODED DIAGRAM

EXPLODED DIAGRAM 1

![SUNNY HEALTH FITNESS SF-E320047 Elite Interactive Series Exercise Elliptical

• parts19](https://manuals.plus/wp-content/uploads/2023/12/SUNNY-HEALTH- FITNESS-SF-E320047-Elite-Interactive-Series-Exercise-Elliptical-parts19.jpg)

EXPLODED DIAGRAM 2

PARTS LIST

No.| Description| Spec.| Qty| No.| Description| Spec.| Qty
---|---|---|---|---|---|---|---
1| Main Frame| | 1| 63| Left Decorative Cover| | 1
2| Front Stabilizer| | 1| 64| Right Decorative Cover| | 1
3| Rear Stabilizer| | 1| 65| Adjustable End Cap| | 4
4| Front Post| | 1| 66| Screw| ST4.220| 8
5| Left Swing Rod| | 1| 67| Bolt| M855| 4
6| Right Swing Rod| | 1| 68| Bolt| M840| 2
7| Left Foot Bar| | 1| 69| Transportation Wheel| | 2
8| Right Foot Bar| | 1| 70| Screw| M820| 10
9| Left Handlebar| | 1| 71| Tension Wire| L=500mm| 1
10| Right Handlebar| | 1| 72| Sensor Wire| L=1600mm| 1
11| Middle Handlebar| | 1| 73| Extension Sensor Wire| L=1100mm| 1
12| Foam Grip| Ф24Ф30500| 2| 74| Bottle Holder| | 1
13| Handrail End Cap| | 2| 75| Tension Control Knob| | 1
14| Handle Pulse Sensor| | 2| 75a| Tension Control Wire| L=760mm| 1
14a| Handle Pulse Wire| L=750mm| 1| 76| Big Arc Washer| Ф5Ф181.0| 1
15| Plug| Ф12.1| 1| 77| Bolt| M555| 1
16| Screw| ST4.220| 2| 78| C-clip| Φ201| 2
17| Spring Washer| Ф8| 10| 79| Bearing| 6004ZZ| 2
18| Bolt| M830| 2| 80| Wave Washer| Φ20Φ240.3| 1
19| Clamp Cover| | 1| 81| Belt| PJ400| 1
20| Computer| | 1| 82| Nut| M6 S10| 4
20a| Computer Wire| | 1| 83| Spring Washer| Ф6| 4
21| Screw| M510| 6| 84| Screw| M615| 4
22| Cap| Ф321.5| 2| 85| Belt Pulley| Φ260| 1
23| Foam Grip| Ф31Ф41675| 2| 86| Left Belt Cover| | 1
24| Bolt| M843| 4| 87| Right Belt Cover| | 1
25| Big Arc Washer| Ф8Ф202.0| 6| 88| Crank Cover| | 2
26| Nut| M8| 15| 89| Left Crank| 6.5″| 1
27| Left Swing Rod Cover-A| | 1| 90| Right Crank| 6.5″| 1
28| Left Swing Rod Cover-B| | 1| 91| Nut| M121.25| 2
29| Right Swing Rod Cover-A| | 1| 92| Crank Cap| | 2
30| Right Swing Rod Cover-B| | 1| 93| Screw| ST4.225| 8
31| Bolt| M816| 2| 94| Screw| M615| 2
32| Big Washer| Ф32Ф82.0| 2| 95| Washer| Ф6Ф161.2| 4
33| Shaft Sleeve| Φ323.5| 4| 96| Shaft Snap Ring| Ф121.0| 2
34| Wave Washer| Ф19Ф260.3| 2| 97| Magnetic Plate Axle| | 1
35| Bushing| Φ31.8Φ19.2| 2| 98| Magnetic Bracket| | 1
36| Shaft Sleeve| Φ323| 4| 99| Magnet Seat| | 1
37| Insulation Casing| Ф14Ф8.258| 2| 100| Magnet| | 4
38| Left Foot Bar Cover| | 1| 101| Screw| ST2.99| 5
39| Left Foot Bar Cover| | 1| 102| Spring| | 1
40| Right Foot Bar Cover| | 1| 103| Bolt| M645| 1
41| Right Foot Bar Cover| | 1| 104| Nut| M6| 2
42| Screw| ST4.216| 10| 105| Bolt| M612| 6
43| Square Cap| 6030| 2| 106| Washer| Ф6Ф121.0| 7
44| Bolt| M875| 2| 107| Bearing End Cover| | 2
45| Washer| Ф8Ф161.5| 17| 108| Bearing Seat| | 2
46| Bolt| M610| 1| 109| Screw| M612| 2
47| Bolt| M850| 4| 110| Bearing| 6001| 2
48| Left Pedal| | 1| 111| Flywheel| Ф240| 1
49| Right Pedal| | 1| 112| Idler Wheel Shaft| | 1
50| Bolt| M1055| 2| 113| PC Pad| | 1
51| Small Alloy| Ф14Ф1010| 4| 114| Screw| M8| 1
52| Washer| Ф10Ф202.0| 2| 115| Idler Wheel| | 1
53| Nut| M10| 2| 116| Bolt| M885| 1
54| U Bracket| | 2| 117| Screw| ST4.215| 1
55| Plastic Bushing| Ф3220| 4| 118| Cover Limit Column| | 2
56| Shaft Sleeve| | 4| 119| Plastic Washer| Ф8Ф202.0| 4
57| Left Pedal Bolt| Ф1689L23| 1| 120| Shipping Tube| | 2
58| Wave Washer| Ф28Ф170.3| 2| 121| Allen Wrench| S6| 1
59| Spring Washer| Ф20Ф13B2| 2| 122| Allen Wrench| S8| 1
60| Left Nylon Nut| 1/2”| 1| 123| Spanner| S10,13,14,15| 1
61| Right Pedal Bolt| Ф1689*L23| 1| 124| Spanner| S10,13,17,19| 1
62| Right Nylon Nut| 1/2”| 1| 125| End Cap| | 1

CONNECT WITH US
**FOR FITNESS ARTICLES, VIDEOS & WORKOUTS

**https://vqr.vc/vKdFNv2Kf

877-907-8669). WWW.SUNNYHEALTHFITNESS.COM IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. Keep children and pets away from the equipment. The equipment is designed for adult use only. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (60 CM) of free space all around it. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. Do not place fingers or objects into the moving parts of the equipment. The maximum weight capacity of this unit is 275 pounds (125 KG). The equipment is not suitable for therapeutic use. To avoid bodily injury and/or damage to the product or property, proper lifting and moving are required. Your product is intended for use in cool, dry conditions. You should avoid storage in extreme cold, hot, or damp areas as this may lead to corrosion and other related problems. This equipment is designed for indoor and home use only; it is not intended for commercial use. PRE-ASSEMBLY CHECK LIST Before you start to assemble, please make sure all parts are included No. Description Spec. Qty. 1 Main Frame 1 3 Rear Stabilizer 1 5/7/1954 Left Swing Rod/ Left Foot Bar/  U Bracket 1SET 9 Left Handlebar 1 11 Middle Handlebar 1 27/28 Left Swing Rod Cover-A/B 1SET 38/39 Left Foot Bar Cover-A/B 1SET 63/64 Left / Right Decorative Cover 1SET 48/49 Left / Right Pedal 1SET 20 Computer 1 74 Bottle Holder 1 2 Front Stabilizer 1 4 Front Post 1 6/8/1954 Right Swing Rod/ Right Foot Bar/ U Bracket 1SET 10 Right Handlebar 1 19 Clamp Cover 1 29/30 Right Swing Rod Cover-A/B 1SET 40/41 Right Foot Bar Cover-A/B 1SET A Hardware Package 1 B Thank You Card 1 C Manual 1 D AA Battery 2 HARDWARE PACKAGE Ordering Replacement Parts (U.S. and Canadian Customers only) Please provide the following information in order for us to accurately identify the part(s) needed: The model number (found on cover of manual) The product name (found on cover of manual) The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST” (found near on the page17-21) Please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-907-8669) ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). STEP 1: Unscrew 4 Screws (No. 70) from Main Frame (No. 1) with Allen Wrench (No. 121). Remove 4 Plastic Washers (No. 119) and 2 Shipping Tubes (No. 120) from Main Frame (No. 1). You may save these parts Screws (No. 70), Plastic Washers (No. 119),Shipping Tubes (No. 120)in case you would like to repackage and transport this equipment in the future. STEP 2: Attach the Front Stabilizer (No. 2) and Rear Stabilizer (No. 3) to the Main Frame (No. 1) with 4 Bolts (No. 67) and 4 Washers (No. 45). Tighten and secure with Allen Wrench (No. 121). STEP 3: Remove 6 Screws (No. 70), 4 Washers (No. 45), 2 Big Arc Washers (No. 25) and 6 Spring Washers (No. 17) from the Main Frame (No. 1) with Allen Wrench (No.121). CAUTION: Please make sure the Tension Control Knob (No. 75) is at the lowest resistance level (level 1, all the way to the left) before you connect any wires together. Attach the Tension Control Wire (No. 75a) into the metal bracket of Tension Wire (No. 71) as shown in drawing A. Then, pull Tension Control Wire (No. 75a) upward and insert it into the slot of metal bracket of Tension Wire (No. 71) as shown in drawing B. Make sure the metal fitting on Tension Control Wire (No. 75a) is secured in the metal bracket. Connect the Extension Sensor Wire (No. 73) with Sensor Wire (No. 72). Insert the connecting wires into Front Post (No. 4). Attach the Front Post (No. 4) to the Main Frame (No. 1) with 6 Screws (No. 70), 4 Washers (No. 45), 2 Big Arc Washers (No. 25) and 6 Spring Washers (No. 17) that were removed. Tighten and secure with Allen Wrench (No. 121). NOTE: Be careful not to pinch any wires when attaching Front Post (No. 4) to Main Frame (No. 1). STEP 4: Attach the Left Decorative Cover (No. 63) and Right Decorative Cover (No. 64) to the Main Frame (No. 1) with 4 Screws (No. 42). Tighten and secure with Spanner (No. 123). STEP 5: Remove 2 Bolts (No. 31), 2 Spring Washers (No. 17), 2 Big Washers (No. 32) and 2 Wave Washers (No. 34) from the Front Post (No. 4) with Spanner (No. 123). Attach the Left Swing Rod (No. 5) onto the left horizontal axis of the Front Post (No. 4) with 1 Bolt (No. 31), 1 Spring Washer (No. 17), 1 Big Washer (No. 32) and 1 Wave Washer (No. 34) that were removed. Tighten and secure with Spanner (No. 123). Attach the U Bracket (No. 54) on the Left Foot Bar (No. 7) to the Left Crank (No. 89) with 1 Left Pedal Bolt (No. 57), 1 Wave Washer (No. 58). Turn the Left Pedal Bolt (No. 57) counter-clockwise as tightly as you can with your hand. Secure by tightening 1 Spring Washer (No. 59) and 1 Left Nylon Nut (No. 60) clockwise. Then use Allen Wrench (No. 122) and Spanner (No. 124) to tighten securely. Attach the Right Swing Rod (No. 6) onto the right horizontal axis of the Front Post (No. 4) with 1 Bolt (No. 31), 1 Spring Washer (No. 17), 1 Big Washer (No. 32) and 1 Wave Washer (No. 34) that were removed. Tighten and secure with Spanner (No. 123). Attach the U Bracket (No. 54) on the Right Foot Bar (No. 8) to the Right Crank (No. 90) with 1 Right Pedal Bolt (No. 61), 1 Wave Washer (No. 58). Turn the Right Pedal Bolt (No. 61) clockwise as tightly as you can with your hand. Secure by tightening 1 Spring Washer (No. 59) and 1 Right Nylon Nut (No. 62) counter- clockwise. Then use Allen Wrench (No. 122) and Spanner (No. 124) to tighten securely. STEP 6: Attach the Left Pedal (No. 48) to the Left Foot Bar (No. 7) with 2 Bolts (No. 47), 2 Washers (No. 45) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123). Attach the Right Pedal (No. 49) to the Right Foot Bar (No. 8) with 2 Bolts (No. 47), 2 Washers (No. 45) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123). Attach the Left Foot Bar Cover-A (No. 38) and Left Foot Bar Cover-B (No. 39) to the Left Foot Bar (No. 7) with 3 Screws (No. 42). Tighten and secure with Spanner (No. 123). Attach the Right Foot Bar Cover-A (No. 40) and Right Foot Bar Cover-B (No. 41) to the Right Foot Bar (No. 8) with 3 Screws (No. 42). Tighten and secure with Spanner (No. 123). STEP 7: Attach the Left Handlebar (No. 9) to the Left Swing Rod (No. 5) with 2 Bolts (No. 24), 2 Big Arc Washers (No. 25) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123). Attach the Right Handlebar (No. 10) to the Right Swing Rod (No. 6) with 2 Bolts (No. 24), 2 Big Arc Washers (No. 25) and 2 Nuts (No. 26). Tighten and secure with Spanner (No. 123). STEP 8: Attach the Left Swing Rod Cover-A (No. 27) and Left Swing Rod Cover-B (No. 28) to the Left Swing Rod (No. 5) by hand. Attach the Right Swing Rod Cover-A (No. 29) and Right Swing Rod Cover-B (No. 30) to the Right Swing Rod (No. 6) by hand. STEP 9: Attach the Middle Handlebar (No. 11) to the Front Post (No. 4) with 2 Bolts (No. 18) and 2 Spring Washers (No. 17). Tighten and secure with Allen Wrench (No. 121). Attach Clamp Cover (No. 19) to the Middle Handlebar (No. 11) by hand. STEP 10: Remove 4 Screws (No. 21) from the back of the Computer (No. 20) with the Spanner (No. 123). Connect the Extension Sensor Wire (No. 73) with Computer Wire (No. 20a). Then insert them into the Front Post (No. 4). Insert the Handle Pulse Wire (No. 14a) into the Pulse Input jack on the back of Computer (No. 20). Attach Computer (No. 20) to the top end of the Front Post (No. 4) with 4 Screws (No. 21) that were removed. Tighten and secure with Spanner (No. 123). STEP 11: Attach Bottle Holder (No. 74) to the Front Post (No. 4) with 2 Screws (No. 21). Tighten and secure with Spanner (No. 123). The assembly is complete! BATTERY INSTALLATION & REPLACEMENT BATTERY INSTALLATION Take out 2 AA batteries from computer box. Press the buckle of battery cover on the Computer (No. 20), then remove battery cover. Install 2 AA batteries into the battery case on the back of the Computer (No. 20). Pay attention to the battery + and – poles before installing. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 20). The installation is complete! BATTERY REPLACEMENT Press the buckle of battery cover on the back of the Computer (No. 20), then remove battery cover. Remove the 2 old AA batteries in the battery case and install 2 new AA batteries into the battery case on the back of the Computer (No. 20). Pay attention to the battery + and – poles before installing. Press the buckle of battery cover, then put the battery cover back to the back of the Computer (No. 20). The replacement is complete! BATTERY DISPOSAL Dispose the batteries according to the laws and regulations of your local region. Some batteries may be recycled. When disposing or recycling, do not mix battery types. ADJUSTMENTS GUIDE MOVING THE ELLIPTICAL BIKE Press the Middle Handlebar (No. 11) and tilt the elliptical bike until the Transportation Wheels (No. 69) touch the ground. Now you can transport the elliptical bike to the desired location with ease. ADJUSTING THE BALANCE In order to achieve a smooth and comfortable ride, you must ensure that the elliptical bike is stabled and secured. If you notice that the elliptical bike is unbalanced during use, you should adjust the Adjustable End Caps (No. 65) located on the front and rear stabilizers until the elliptical bike becomes levelled with the floor surface. ADJUSTING THE TENSION Adjust the tension by rotating the Tension Control Knob (No. 75) clockwise to increase the level of resistance. Rotate the Tension Control Knob (No. 75) counter-clockwise to decrease the level of resistance. Tension levels are set at Level 1 being the lowest and Level 12 being the highest. CLEANING The elliptical bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents on plastic parts. Please wipe your perspiration off the elliptical bike after each use. Be careful not to get excessive moisture on the computer display panel as this might cause electrical hazard or electronics to fail. Please keep the elliptical bike, especially the computer, out of direct sunlight to prevent screen damage. Please inspect all assembly bolts and pedals on the elliptical bike for proper tightness every week. STORAGE Store the elliptical bike in a clean and dry environment, away from children. EXERCISE COMPUTER FUNCTION BUTTONS MODE Press the button to select hour, minute, year, month and date for setting. Press the button to select TIME, DISTANCE, CALORIES and PULSE to preset. Press the button for selection function display on main LCD, or enter after setting. Press the button to confirm setting value of gender, age, height and weight. Press the button and hold for 2 seconds to reset all value to zero. (When the user replace batteries, all the values will reset to ZERO automatically.) SET To set up the hour, minute, year, month and date. To set up the target value of Time, Distance, Calories and Pulse. You can hold the button to increase the value fast. (The computer has to be in stop condition.) To set up the personal data of gender, age, height and weight for Body fat test. RESET Press the button to reset function value when setting.  (When the user replace batteries, all the values will reset to ZERO automatically.) BODY FAT Press this button to enter Body Fat measure function, then press MODE key to enter the setting Mode of your personal data of Gender, Age, Height and Weight. After finished setting, press it again to measure your Body fat ration (FAT%) and BMI.  RECOVERY To act the heart rate recovery function after pulse signal in. Press any button to return to the main display.  FUNCTIONS SCAN Automatically scan through each mode in sequence every 6 seconds. The display loop is RPM  Speed – Time – Distance – Calorie - Pulse on the main screen. TIME Accumulates total time from 00:00 up to 99:59. The user may preset target time by pressing SET &MODE button. Each increase is 1 minute.  RPM Displays the Rotation per Minute (RPM). The RPM and SPEED will switch to another display in every 6 seconds after exercise starts.  SPEED Displays current training speed. Maximum speed is 99.9 km/h or mile/h. DISTANCE Accumulates total distance from 0.00 up to 99.99 km or mile. The user may preset target Distance data by pressing SET & MODE button. Each increase setting is 0.5 km or mile.  CALORIES Accumulates calories consumption during training from 0 to max. 999 calories. The user may also preset the target calorie before training by press SET & MODE button. Each setting  increase is10 cal. Note : This data is a rough guide for comparison of different exercise sessions which can not be used in medical treatment.  PULSE The monitor will display the user's heart rate in beats per minute during training. You may set the target heart rate by press the SET & MODE button. CALENDAR The monitor will display date, month, and year when the monitor is in sleep mode. CLOCK The monitor will display current clock time when the monitor is in sleep mode. TEMPERATURE Displays current room temperature from 10 ℃ to 60 ℃when the monitor is in sleep mode. OPERATION ORDER: Power on – Installs 2 pieces of 1.5V UM-3 or AA batteries. The monitor start to segment test with a long beep sound. (Whenever batteries are removed, all the functions values will be reset to zero or default value.) Set current data – Press the SET and MODE buttons to set up current clock time, year, month, and date. After the first setting till batteries be replaced next time, those preset data will be updated automatically. Select and preset target value – Get access to the setting function of Time, Distance, Calories and Target Pulse. When you are in each setting mode. For instance the Time setting, when the time value is glitter, you can press the SET button to adjust the value. Press the MODE button for confirmation and skip to next setting. The setting of Distance & Calories is the same as Time setting. After entering speed signal, each function of SPEED-RPMTIME-DISTANCE- CALORIES-PULSE will skip to display in every 6 seconds. You can also press the MODE button to select single function display on the main screen except RPM & SPEED. The RPM & SPEED function will switch display in 6 seconds. If you have preset any function target before, the function starts to count down from the target when the training starts. Once the target is achieved, the monitor will beep and the function will count up from zero automatically if the training is still going. Pulse measurement – After you hold on two handgrip sensors in a few seconds, the monitor will show up your current heart rate in beats per minute. To ensure the heart rate readout precisely, please do not hold one hand only. You may preset target pulse before training starts. Once your current heart rate is achieved to the target, the value of pulse will beep to remind you. Recovery –When the PULSE is working, you can press “RECOVERY” button to start the recovery test function. The monitor will count down from 0:60 second to 0:00 and the heart beat symbol will be glitter till counting down to “0:00”. During 60 seconds counting period, please keep heart rate sensor is attached. Then the screen will display “F1 to F6” to show your recovery status. F1 is the best, and the F6 is the worst. You may keep exercising to improve your heart rate recovery status, and check it by using Recovery function. Body Fat - a) Press BODY FAT key to enter body fat measurement. b) Press MODE and SET buttons to input your personal data. Each personal data available setting area is described as the following: c) AGE: 10 ~ 99 years HEIGHT: 100 ~ 250 cm (or 3’03” ~ 8’02“) WEIGHT: 10 ~ 200 kg (or 22 ~ 440 lb) d) After all personal data have been input, you can press BODY FAT button and hold on grip conductors to start the body fat testing. e) It takes few seconds to test the body fat. If you did not hold on the conductor during the testing procedure, the LCD will show the error sign Err after 10 seconds period. f) After the testing is finished, you will see fat advice in percentage and BMI figure (body mass Index) display on the main LCD in sequence by scan mode. g) BODY FAT % : Calculate from your personal data to show the value from 5%~50%. h) BMI : Calculate from your personal data to show the value from 1.0~99.99. i) Press any key to return to the main display. Note Stop training for 4 minutes, the screen will show up room temperature, clock, and calendar display automatically. If the computer displays abnormally, please re-install the battery and try again. Battery Spec: 1.5V UM-3 or AA (2PCS). APP CONNECTION: Scan the QR code below to download the SunnyFit app onto your mobile device. https://sunnyhealthfitness.com/app/ If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in. Ensure that the Bluetooth function is turned on from your mobile device. To connect the equipment to the SunnyFit app: a. From the “Workout” tab, press on the “Search” button to search for your equipment. b. Once your equipment appears on the list, tap the “Select” button to confirm. c. Note: If your equipment does not appear on the "Searching for Equipment" list, check the EXERCISE COMPUTER on your equipment to ensure that it is not in sleep mode and your phone's Bluetooth function is on, then tap "Retry" to search again. d. Once your equipment shows up on the “Workout” tab as “Currently Selected”, your equipment is now ready to display, track, and record your equipment’s workout stats on the app! If you are unable to replicate these steps, or have any other issues with the SunnyFit app, please contact SunnyFit support at support@sunnyfit.com, or use the in-app “Contact Us” form to request support (“Me” tab -> “Contact Us”). TROUBLESHOOTING PROBLEM SOLUTION There is no display on the computer. 1. Remove the computer and verify that the wire from the computer is properly connected to the wire that comes from the front post. 2. Check if the batteries are correctly positioned and battery springs are in proper contact with batteries. 3. The batteries in the computer may be unresponsive. Change to new batteries. The elliptical bike wobbles when in use. Tum the adjustable end caps on the front and rear stabilizers as needed to level the elliptical bike. The elliptical bike makes squeaking noise when in use. Some bolts on the elliptical bike might have become loose. Please inspect all the bolts and tighten any loosened bolts. EXPLODED DIAGRAM  EXPLODED DIAGRAM 1 EXPLODED DIAGRAM 2 PARTS LIST No.  Description  Spec.  Qty  No.  Description  Spec. Qty  1 Main Frame  1 63 Left Decorative Cover  1 2 Front Stabilizer  1 64 Right Decorative Cover  1 3 Rear Stabilizer  1 65 Adjustable End Cap   4 4 Front Post   1 66 Screw  ST4.220  8 5 Left Swing Rod  1 67 Bolt  M855  4 6 Right Swing Rod  1 68 Bolt  M840  2 7 Left Foot Bar  1 69 Transportation Wheel  2 8 Right Foot Bar  1 70 Screw  M820  10 9 Left Handlebar  1 71 Tension Wire  L=500mm  1 10 Right Handlebar  1 72 Sensor Wire   L=1600mm  1 11 Middle Handlebar  1 73 Extension Sensor Wire  L=1100mm  1 12 Foam Grip Ф24Ф30500  2 74 Bottle Holder  1 13 Handrail End Cap   2 75 Tension Control Knob  1 14 Handle Pulse Sensor  2 75a  Tension Control Wire  L=760mm  1 14a Handle Pulse Wire  L=750mm  1 76 Big Arc Washer   Ф5Ф181.0  1 15 Plug  Ф12.1 1 77 Bolt  M555  1 16 Screw  ST4.220  2 78 C-clip  Φ201  2 17 Spring Washer Ф8  10 79 Bearing  6004ZZ  2 18 Bolt  M830  2 80 Wave Washer  Φ20Φ240.3  1 19 Clamp Cover  1 81 Belt   PJ400  1 20 Computer  1 82 Nut    M6 S10  4 20a Computer Wire  1 83 Spring Washer   Ф6  4 21 Screw  M510  6 84 Screw  M615 4 22 Cap  Ф321.5  2 85 Belt Pulley   Φ260  1 23 Foam Grip   Ф31Ф41675  2 86 Left Belt Cover  1 24 Bolt  M843  4 87 Right Belt Cover  1 25 Big Arc Washer Ф8Ф202.0  6 88 Crank Cover  2 26 Nut  M8  15 89 Left Crank  6.5"  1 27 Left Swing Rod Cover-A  1 90 Right Crank  6.5"  1 28 Left Swing Rod Cover-B  1 91 Nut  M121.25  2 29 Right Swing Rod Cover-A 1 92 Crank Cap  2 30 Right Swing Rod Cover-B  1 93 Screw  ST4.225  8 31 Bolt  M816   2 94 Screw  M615  2 32 Big Washer   Ф32Ф82.0  2 95 Washer   Ф6Ф161.2  4 33 Shaft Sleeve  Φ323.5 4 96 Shaft Snap Ring  Ф121.0  2 34 Wave Washer  Ф19Ф260.3 2 97 Magnetic Plate Axle  1 35 Bushing  Φ31.8Φ19.2  2 98 Magnetic Bracket  1 36 Shaft Sleeve  Φ323  4 99 Magnet Seat  1 37 Insulation Casing  Ф14Ф8.258 2 100 Magnet   4 38 Left Foot Bar Cover 1 101 Screw  ST2.99  5 39 Left Foot Bar Cover 1 102 Spring  1 40 Right Foot Bar Cover 1 103 Bolt  M645  1 41 Right Foot Bar Cover 1 104 Nut  M6   2 42 Screw  ST4.216  10 105 Bolt  M612  6 43 Square Cap  6030  2 106 Washer   Ф6Ф121.0  7 44 Bolt  M875  2 107 Bearing End Cover  2 45 Washer   Ф8Ф161.5  17 108 Bearing Seat  2 46 Bolt  M610  1 109 Screw  M612  2 47 Bolt  M850   4 110 Bearing  6001 2 48 Left Pedal  1 111 Flywheel  Ф240  1 49 Right Pedal  1 112 Idler Wheel Shaft  1 50 Bolt M1055  2 113 PC Pad  1 51 Small Alloy  Ф14Ф1010  4 114 Screw  M8  1 52 Washer   Ф10Ф202.0  2 115 Idler Wheel  1 53 Nut  M10  2 116 Bolt  M885  1 54 U Bracket  2 117 Screw  ST4.215  1 55 Plastic Bushing   Ф3220  4 118 Cover Limit Column  2 56 Shaft Sleeve  4 119 Plastic Washer  Ф8Ф202.0  4 57 Left Pedal Bolt  Ф1689L23  1 120 Shipping Tube  2 58 Wave Washer Ф28Ф170.3  2 121 Allen Wrench    S6  1 59 Spring Washer   Ф20Ф13B2  2 122 Allen Wrench  S8  1 60 Left Nylon Nut  1/2”  1 123 Spanner  S10,13,14,15  1 61 Right Pedal Bolt  Ф1689*L23  1 124 Spanner  S10,13,17,19  1 62 Right Nylon Nut  1/2”  1 125 End Cap  1 CONNECT WITH US FOR FITNESS ARTICLES, VIDEOS & WORKOUTS https://vqr.vc/vKdFNv2Kf SUNNY - Logo" width="240" height="115" />

| @SUNNYHEALTHANDFITNESS| | @SUNNYHEALTHFITNESS| | @SUNNYHEALTHFIT
---|---|---|---|---|---
| /SUNNYHEALTHFITNESS| | /SUNNYHEALTHANDFITNESS| |  @DLSUNNYHEALTHFITNESS

WWW.SUNNYHEALTHFITNESS.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>