nVent HOFFMAN P2BP2125 Proline G2 200 MM Plinth Bases Owner’s Manual

June 27, 2024
nVent HOFFMAN

P2BP2125 Proline G2 200 MM Plinth Bases

nVent LOGO

Product Information

CATALOG NUMBER

  • P2BP2125
    ProLine G2 Plinth Bases install under an enclosure to provide space for cables to enter from below.
Specifications
  • Article Number: 31118
  • Height: 7.58 in
  • Width: 47.21 in
  • Depth: 18.27 in
  • Material: Mild Steel
  • Finish: Powder Coated
  • Color: Jet Black
  • Color Code: RAL 9005
  • Thickness: 16 ga
  • Type: 200mm
  • Weight: 33 lb

FEATURES

  • Four access panels for cable management options at the base of the enclosure
  • Sturdy cast aluminum corner supports for superior performance under load
  • Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be
  • attached after integration and just prior to shipment
  • Stackable up to 400mm in height using Plinth Base Stacking Kit (not included)
  • 100 mm or 200 mm options
  • To maintain a NEMA Type 12 environmental rating, gland plate must also be used in the base of the enclosure
  • Installation hardware included

PRODUCT ATTRIBUTES

  • Article Number: 31118
  • Height: 7.58 in
  • Width: 47.21 in
  • Depth: 18.27 in
  • Material: Mild Steel
  • Finish: Powder Coated
  • Color: Jet Black
  • Color Code: RAL 9005
  • Thickness: 16 ga
  • Type: 200mm
  • Weight: 33 lb

Product Usage Instructions

The ProLine G2 200-MM Plinth Bases are designed to be installed under an enclosure to create space for cables to enter from below.

Follow these steps for proper installation:

  1. Ensure the surface where the plinth base will be installed is clean and level.
  2. Place the plinth base under the enclosure in the desired position.
  3. Secure the plinth base to the floor using appropriate fasteners (not included).
  4. Route cables through the space created by the plinth base for a tidy and organized setup.

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

Our powerful portfolio of brands:
nVent.com

  • CADDY
  • ERICO
  • HOFFMAN
  • RAYCHEM
  • SCHROFF

TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

FAQ

Q: Can the ProLine G2 Plinth Bases support heavy enclosures?
A: The ProLine G2 Plinth Bases are made of sturdy mild steel and can support a substantial weight. However, it is recommended to verify the weight capacity of the specific model you have.

Q: Can I paint the plinth bases a different color?
A: While the plinth bases come in Jet Black color with a powder-coated finish, it is possible to paint them a different color if desired. Ensure proper surface preparation and use paint suitable for metal surfaces.

Q: Are installation instructions available online?
A: Yes, installation instructions for nVent products, including the ProLine G2 Plinth Bases, can be found at www.nvent.com or obtained from your nVent customer service representative.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

nVent HOFFMAN User Manuals

Related Manuals