Brilliant 20801 Smart WiFi Swift Pan and Tilt Camera Instruction Manual

: June 5, 2024
: brilliant

Table of Contents

Brilliant 20801 Smart WiFi Swift Pan and Tilt Camera
Instructions
INSTALLATION
TECHNICAL SPECIFICATIONS
BRILLIANTSMART APP – SWIFT WiFi camera – START UP
RESET DEVICE
FULL FACTORY RESET
- BRILLIANTSMART APP – SETTINGS
BRILLIANT SMART APP – FUNCTIONS/FEATURES
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Brilliant 20801 Smart WiFi Swift Pan and Tilt Camera

Instructions

BEFORE YOU BEGIN PLEASE DOWNLOAD AND REGISTER THE BRILLIANTSMART APP.
For help or assistance go to www.brilliantsmart.com.au

Monitor your home from anywhere, anytime. The smart Swift camera allows you to move the lens up and down and swivel to see all areas of the room.

Enable your WiFi network on you mobile device making sure to select 2.4GHz frequency network if your home network supports dual band frequencies. i.e. 2.4GHz or 5GHz.
It’s important that you connect to 2.4GHz Frequency. Please disable or unselect the 5GHz Frequency in home WiFi network if able. This can be reselected or enabled once the smart devices have been paired to the BrilliantSmart app.
Note: if you are not familiar with this procedure you may need to contact your internet service provider for some assistance.

Before installation of your BrilliantSmart device (in the location you desire) please check the WiFi signal is at least 2 bars strength on your mobile device WiFi icon.

If a poor WiFi signal, upgrading your router, installing an AP(Access Point) or adding a WiFi Extender may be needed
(sold separately). If installing more than 15 smart devices to your WiFi Network, we do not recommend using WiFi extenders – these will be recognised from your Network as a separate Smart device and will limit your connectivity. Brilliant 20801 Smart WiFi Swift Pan and Tilt Camera fig
1

INSTALLATION

Unpack camera from box and check all components are included – smart camera, power adaptor and micro USB cable, mounting bracket, rawl plugs, screws (microSD memory card not included). Please dispose of this packaging material thoughtfully. Also, please dispose of this product thoughtfully once it has passed its useful life. When your smart device comes to the end of its life or you choose to update or upgrade it, please do not dispose of it with your normal household waste. Please recycle where facilities exist. When disposing of this fitting, check with your local authority for suitable options.

BRACKET MOUNTED

STEP 1
Using mounting bracket as template. Drill 2 x holes in mounting surface with correct size drill bit.
Insert 2 x Rawl plugs (supplied) and fasten mounting bracket with 2 x screws (supplied) into Rawl plugs.

STEP 2
Secure camera to locking lug.

STEP 3
Connect USB cable into device and adaptor. Pug adaptor into power outlet. Continue with WiFi setup.

SURFACE MOUNTED

STEP 1
Place device on any safe and stable surface. It will need to be close to a power socket for power.
STEP 2
Connect USB cable into device and adaptor. Plug adaptor into power outlet. Continue with WiFi setup. ****

INSTALLATION OF MICRO SD CARD

Ensure the camera is turned off. Gently roll the lens head up to reveal the memory card slot, then slide the 128GB (or smaller) Micro SD memory card into the slot. The camera lens will adjust itself automatically once it’s turned on and paired.

TECHNICAL SPECIFICATIONS

MODEL NO: 20801/05

– Class 10 minimum (not included)

| Adaptor| 220V–240V AC 50Hz

Output: 5V DC, 1A–2A (not included)

Sound Detection| Sends notification to phone| Motion Detection| 3-Level motion detection (low, medium, high) – sends notification to phone
Audio| High quality two-way audio| Weather resistant rating| IP20 – indoor use only (do not use in wet areas)
Works with 2.4GHz WiFi frequency only| Security: Mac Encryption; WEP/WAPI/TKIP/AES
WiFi Standard: 2.4GHz IEEE802.11b/g/n| System Req’s: iOS 8.0 or higher, Android 4.1 or higher
Included in the box: Smart Swift Camera, AC Adaptor, Micro USB Adaptor Cable, Wall Mounting Bracket, 2 Rawl Plugs, 2 Screws, Installation Manual x 1

BRILLIANTSMART APP – SWIFT WiFi camera – START UP

On power-on, after approx 5 seconds, the Swift camera red lights will appear and camera will rotate and chime 3 times twice, then it will begin beeping. It is ready to pair with the BrilliantSmart App.

Open the BrilliantSmart App
that you’ve previously registered and set up.
Press the home screen. If you are connecting a smart device for the first time – press ‘Add Device’ or if you are adding another smart device – press the plus sign ‘+’.
Next, select the type of device you wish to add. If you’re connecting a Smart camera device, tap ‘Smart Camera’.
Icons may differ depending on your phone, tablet or operating system.
If you have heard a prompt tone (3 quick chimes) then tap on the ‘tick’ for ‘make sure the indicator is flashing quickly or a prompt tone is heard’. Then press ‘Next’.
Select your 2.4GHz network on your home modem and enter your password. Note: for first time users you may need to search for your 2.4GHz network and add your password. Once your device is paired, the BrilliantSmart app will save this information so you don’t need to re-enter each time a device is added. This is private and confidential with no access from third parties.
Scan the QR code with the smart camera. Ensure the QR code is facing the smart camera lens approx 20cm apart – hold until
the smart camera chimes. Select ‘I Heard a Prompt’.
The BrilliantSmart app will start connection to your smart device. The red light will stop flashing once connection is in progress.
Once connected you’ll get a ‘tick’ and voice prompt ‘camera online’ to show your device has successfully connected. Select the room your device is to be located. Select the pen icon to change the name of your smart device.
Type in the new device name and press ‘Save’.
The smart device can now be controlled by the BrilliantSmart app.
Select your Smart camera to select or change settings.

RESET DEVICE

RESET DEVICE – If the device fails to go into pairing mode after the initial start up.
Press and hold the reset button for approx 5 seconds on the back of the smart device. Device will chime 3 times twice and prompt and start beeping. It is now ready to connect to the BrilliantSmart App. Go to step 1 of Start up settings on page 3.
If connected to the App and you reset the smart device with the pin, devices goes offline – follow start up settings on page 3.

FULL FACTORY RESET

If the smart device is non responsive in the app, the device may need to be reset to factory settings.

Open BrilliantSmart App. Select the smart device that you want to do a full factory reset and hold/press on device Icon.
Shows 1 Selected and a tick against the selected device.
Select ‘Remove Device’.
Press ‘Confirm’. Camera beeps then chimes 3 times twice.
Device is now deleted from the BrilliantSmart app and Cloud.
Follow WiFi START UP on page 3 to reconnect device to BrilliantSmart app.

BRILLIANTSMART APP – SETTINGS

Select the camera that you’ve renamed.
Sound/Speaker
press to turn sound ON
press to turn OFF.
HD or SD – press to change from HD (high definition) or SD (standard definition) photo quality.
Full height – press to have your image the height of the area.
Screenshot – on the BrilliantSmart App, select to take a HD 1080 screenshot. If it’s night the infrared night vision filter enhances the image. Press View Albums to review.
The App saves the screenshot to your phone photo gallery.
Speak – select if you want to talk to your family or scare intruders – gives you one-way or two-way conversation.
Record – select to take a video of the family, intruders or more.
The App saves the video to your phone photo album. Press View Albums to review.
Direction button – press on the outer circle area to move the camera lens left/right and up/down.

BRILLIANTSMART APP

Select the ‘three dots’ at top right of screen for more settings.
Private Mode – turns camera off –no view or recording is available.
Basic Function Settings.
Flip Screen – flips the camera image 180°.
Time Watermark – puts the date and time stamp on the screen image.
Talk Mode
- One-Way Communication –allows you to talk through the camera speaker.
Talk Mode
- Two-Way Communication –allows you to talk and person can talk back through the camera speaker.
  Press the arrow to return to previous screen.
Select ‘Detection Alarm Settings’.
Motion Detection Alarm – turn on to get a notification to your phone and a recording to your photo album if camera detects movement.
Alarm Sensitivity Levels.
3 levels
High – a small motion, such as yawning or stretching.
Medium – a normal daily motion, such as people walking.
Low – a large motion, such as children chasing or jumping around.
Motion Tracking – camera follows and automatically starts recording when it detects object movement.
Schedule – allows you to select specific times when you want motion detection turned on – eg: when you are asleep at night or if you are away from home.
Select ‘Add’ to add a schedule to turn Motion Detection ON.
Select the time to start detection –select an ON time.
Select the days.
Notification – turn on if you want to get a message to your App.
Motion Detection – turns the motion detection ON/OFF.
To turn the Motion Detection OFF –repeat steps 16 and select off.

BRILLIANT SMART APP – FUNCTIONS/FEATURES

Select the double arrows for more functions/features.
Playback – only works if you have a SD memory card installed.
Gallery – on your phone or tablet where camera screens & videos are saved.
Theme colour – select to make the App screen – light.
Theme colour – dark.
Private Mode – turns camera off –no view or recording is available.
Select ‘Turn on the camera’ to restart the camera.
Motion Tracking – the camera tracks and follows movement.
Motion Detection Alarm – turn on to get a notification to your phone and a recording to your photo album if camera detects movement.
Edit – N/A
Messages.
Shows the notifications sent to your phone/tablet when motion has been detected.
Direction button – press on the outer circle area to move the camera lens left/right and up/down.

TROUBLESHOOTING

Problem:

LED indicator light not on or device not powering up.

Possible Cause| Suggested Solution
A. Fuse or circuit breaker has blown.| A. Check main and branch circuit breakers.
B. Loose wire connections to the unit.| B. Check all wire connections to the unit are secure & firmly attached and/or plugs are firmly into the power socket.
Problem:

Indicator light is flashing or device is offline.

Possible Cause| Suggested Solution
A. Device lost internet connection and unable to go back online.| A. Restart device.
Problem:

Unable to pair the device with the BrilliantSmart app.

Possible Cause| Suggested Solution
A. Device not in pairing mode.| A. Press and hold reset switch for 10 seconds until device LED. indicator turns red and starts blinking. (Supplied reset pin may need to be used for models with internal reset switch).
B. No Internet access.| B. Ensure WiFi network is working and able to access internet connection. Refresh the WiFi modem by switching the power OFF then ON. If problem still persists, please contact your internet service provider.
C. Dual WiFi network modem.| C. Ensure your mobile device are connected to 2.4GHz network before start the pair process. Disable 5GHz temporarily until pairing is completed.
D. Modem is too far away from the unit.| D. May need to use WiFi extender or AP for strong WiFi signal in range.
E. BrilliantSmart App requires update.| E. Check & install latest smart app update from the App store.
F. BrilliantSmart App not responding.| F. Remove/delete the app from the mobile device then re-install the smart app.
G. WiFi bandwidth not enough. Too many devices connected to the WiFi modem.| G. Standard modem usually allows connection of up to 10–15 devices. If too many devices are connected, we advise to upgrade the modem or use a WiFi MESH gateway/device.
Problem:

Device in the BriliantSmart app shown Offline.

Possible Cause| Suggested Solution
A. No Internet access.| A. Ensure WiFi network is working and able to access internet connection.
B. Requires refresh to the BrilliantSmart app.| B. At home screen, pull down the screen to refresh the app. Or close the app and start again in your mobile device.
C. Smart device power turns on less than 1 minute.| C. When smart device power on it will take up to 1 to 2 minutes to connect to the cloud server. Wait at least 1 to 2 minutes and refresh the home screen.