GOPIE T07 Portable Mini Tower Computer Chassis Installation Guide
- June 15, 2024
- GOPIE
Table of Contents
GOPIE T07 Portable Mini Tower Computer Chassis
PRODUCT INFORMATION
Thank you once again for purchasing our product. If you have any comments or questions,please send us an email, and we will get back to you within 24 hours.
- Top/Bottom/Front Dust Filter (Dust Prevention)
- PC Case Handle (AL alloy)
- Left Side Glass Panel
- PC Case Feet
Case Components
Hardware List
Disassembling Steps
- Unscrew the four screws on the left side glass panel
- Remove the left side glass panel
- Remove PSU holder
Assembling Steps
- Install top/front/bottom dust filter
- Install case handle
- Install case feet
- Install bottom fans (Reverse Blade Fans)
- Install top fans ( or water-cooling)
- Install rear fan
- Install the motherboard, then install the graphics Card, then install the PCI slot cover
- Install PSU onto the PSU holder, then mount the PSU holder
- Install left-side glass panel
Port Description
- USB 3.1
- Power switch port
HD Installation
- HOD Installation Location (Support up to 2.5″ HOD *5)
- HOD Mounting Holes (HOD Mounting Holes *10 in the bottom of the pc case)
Congratulations, you have completed the setup of your computer case
Support and Service
If you have any further questions or encounter any issues while using the product, please feel free to contact us at 19928724105@163.com. When contacting us, please provide detailed information about the problem.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>