GOPIE X03 White Mid Tower Computer Chassis Instruction Manual

**GOPIE X03 White Mid Tower Computer Chassis Instruction Manual

**

Warm Tips:

1. Please lay the chassis flat when removing and installing the tempered glass panel

2. Please tear off the glass protector before using the case.

3. Front glass panel

4. Chassis main frames

5. Left glass panel

6. Left glass panel screws ight Panel

7. HDD Bracket

8. Top Dust Filter

9. Bottom Dust Filter
   

Install fans or RAD

Remove the left glass panel and right panel

Install fans or RAD

Heat dissipation schematic

Install HDD and SSD

Unscrew the three screws on the HDD bracket and remove the HDD bracket.

Install the SSD on top of the HDD bracket and screw the HDD screws through the corresponding 4 big holes on the bottom of the bracket.

Install the HDD*2 in the HDD bracket and screw on the side of the HDDs.

Install PSU

• Remove right side panel, botiom panel power supply mounting position.

• Align the power supply with the corresponding holes.

• Screw in the power supply screws at the rear of the chassis

Install USB 3.0

• Blue USB 3.0 ports inside the chassis

• Plug into the USB 3.0 socket on the motherboard

• Chassis panel USB 3.0 interface

Accessory Kit

Accessory Name| PSU Screws| Standoff| HDD Screws| Motherboard Screws
---|---|---|---|---
Quantity| 6| 3| 8| 16

Support and Service
If you have any further questions or encounter any issues while using the product, please feel free to contact us at [email protected]. When contacting us, please provide detailed information about the problem
Thank you once again for purchasing our product. If you have any comments or questions, please send us an email, and we will get back to you within 24 hours.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>