CORSAIR iCUE H150i RGB ELITE Liquid CPU Cooler User Manual

iCUE
H100i | H115i | H150i
ELITE
PERFORMANCE LIQUID CPU COOLER

Note: Most newer PC cases include a CPU cut-out to allow access to the bottom of the motherboard.
If your case does not include a cut-out, you will need to remove your motherboard from the case prior to installation. ELITE Series coolers come with the Intel mounting bracket pre-installed on the pump for quick installation.

INTEL

INCLUDED HARDWARE
Highlighted parts for Intel installation only

1. INSTALLING THE INTEL BACKPLATE

Adjust backplate for your required socket.
NOTE: Intel LGA 2066 /2011-3/2011 do not require backplate installation. Proceed to step 2.
2. INSTALLING THE INTEL STANDOFF SCREWS

A. GA 1200/1150/1151/1155/1 156| > Attach the provided Intel standoff for your socket.

Use (A) for LGA 1200/115X, (B) for LGA 2011/ 2011-3/2066 or (C) for LGA1700.
---|---
B. LGA 2011/2011-3/2066| > Tighten all four standoffs until firmly secured.
C. LGA 1700|

3. INSTALL THE FANS AND RADIATOR

Attach the radiator and the fans as shown.
For the best cooling performance, we recommend mounting the fans as an air- intake to your PC case.
4. INSTALLING THE PUMP UNIT

• Align the bracket and pump over the standoff screws as shown.
• Attach the thumb nuts (F) to the standoff screws as shown.
• Tighten the thumb nuts until all four corners are firmly secured.

AMD AM4

INCLUDED HARDWARE
Highlighted parts for AMD AM4 installation only

1. INSTALLING THE AMD AM4 MOUNTING BRACKET

• Remove the integrated Intel mounting bracket (Figure 1).
• Install the AMD AM4 bracket by pushing both sides into the slot on the pump until secure (Figure 2).

Note: It is important that the AMD AM4 retention bracket be evenly secured on all sides before installation.
2. INSTALL THE FANS AND RADIATOR

Attach the radiator and the fans as shown.
For the best cooling performance, we recommend mounting the fans as an air- intake to your PC case.
3. PREPARE THE MOTHERBOARD FOR INSTALLATION

Remove the existing AMD AM4 mounting brackets shown.
4. INSTALLING THE AMD AM4 STANDOFF SCREWS

• Attach the provided AMD AM4 standoffs to the CPU socket.
• Tighten all four screws until firmly secure.

5. INSTALLING THE PUMP UNIT

Align the bracket with the AMD AM4 standoffs as shown. Tighten the thumb nuts (F) until secure.

AMD sTRX4

INCLUDED HARDWARE
Highlighted parts for AMD sTRX4 installation only

1. INSTALLING THE AMD sTRX4 MOUNTING BRACKET

• Remove the integrated Intel mounting bracket (Figure 1).
• Install the AMD sTRX4 bracket by pushing both sides into the slot on the pump until secure (Figure 2).

Note: It is important that the AMD sTRX4 retention bracket be evenly secured on all sides before installation.
2. INSTALLING THE AMD sTRX4 STANDOFF SCREWS

• Attach the provided AMD sTRX4 standoffs to the CPU socket.
• Tighten all four standoff screws until firmly secure.

3. INSTALL THE FANS AND RADIATOR

Attach the radiator and the fans as shown.
For the best cooling performance, we recommend mounting the fans as an air- intake to your PC case.
4. INSTALLING THE PUMP UNIT

• Align the bracket and pump over the standoff screws as shown.
• Attach the thumb nuts (F) to the standoff screws as shown.
• Tighten the thumb nuts until all four corners are firmly secured.

CONNECT FANS TO PUMP AND PUMP TO MOTHERBOARD

• Connect pump tach cable to the CPU_FAN header on your motherboard (Figure 1).
• Connect each fan to the USB-C Wire Harness and connect the USB-C cable to the pump (Figure 2).

CONNECT PUMP TO USB AND SATA POWER

• Using the included USB-C cable, connect the iCUE ELITE Series cooler to a motherboard USB 2.0 header.
• Connect pump power cable that is attached to the USB-C Wire Harness to an available SATA power plug from your power supply.

FAQ

1. How do I know the direction of the air flow of the fan?

An arrow located on the side of the fan indicates the direction of air flow.

2. Can I reuse the pre-applied thermal paste on the cooler for re- installation?

Re-installation of the cooler will require you to clean off the pre-applied thermal paste and apply an aftermarket paste.

3. What orientation should I install my radiator?

The best way to install a radiator is with the tubes on the bottom of the case, though you can install it with the tubes in any position, including an inverted radiator, as long as the highest point in the radiator is visibly higher than the CPU pump.

4. My cooler and fans are blinking red or not functioning. What do I do?

Please double-check all connections between the cooler and the fans. Ensure that the cooler is updated to the most recent firmware via iCUE. If this does not resolve your problems, please open a support ticket at support.corsair.com or contact our customer support team for further troubleshooting and assistance.

https://help.corsair.com/hc/en-us/requests/new

Documents / Resources

| CORSAIR iCUE H150i RGB ELITE Liquid CPU Cooler [pdf] User Manual
iCUE H150i RGB ELITE Liquid CPU Cooler, iCUE H150i, RGB ELITE Liquid CPU Cooler, ELITE Liquid CPU Cooler, Liquid CPU Cooler, CPU Cooler, Cooler
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>