Micron E1MU23Y5 7400 NVMe SSD Instructions

Micron E1MU23Y5 7400 NVMe SSD

Product Information

Scope
This document describes how to upgrade the firmware on a Micron 7400 NVMe SSD using either nvme-cli or msecli. For further assistance with this process please contact your local Micron representative.

Upgrade using nvme-cli

1. Download and install the latest version of nvme-cli from GitHub.
2. Obtain the required Micron 7400 SSD Firmware from your Micron contact or from www.micron.com:
   • Firmware name: Micron_7400_E1MU23Y5_release.ubi
3. List the SSDs in the system:
   • nvme list
   • Note: The target name (nvmeX) for the SSD
4. To download the firmware, use the following nvme-cli commands:
   • nvme fw-download /dev/nvmeX -f Micron_7400_E1MU23Y5_release.ubi
5. To commit and activate the firmware, use the following nvme-cli command:
   • nvme fw-commit /dev/nvmeX -s 2 -a 3
6. Perform a power cycle to the SSD
   • This is required for the firmware changes in E1MU23Y5 to take effect
7. Confirm the firmware has been successfully updated to version E1MU23Y5
   • nvme list

Upgrading using msecli

1. Download and install the latest version of msecli from Micron Technology.
2. Obtain the required Micron 7400 SSD Firmware from your Micron contact or from www.micron.com:
   • Firmware name: Micron_7400_E1MU23Y5_release.ubi
3. List the SSDs in the system:
   • msecli -L
   • Note: The target name (nvmeX) for the SSD
4. To download and activate the firmware, use the following msecli commands:
   • msecli -F -U Micron_7400_E1MU23Y5_release.ubi -n /dev/nvmeX -S 2
5. Perform a power cycle to the SSD
   • This is required for the firmware changes in E1MU23Y5 to take effect
6. Confirm the firmware has been successfully updated to version E1MU23Y5
   • msecli -L

Specifications

Scope

This document describes how to upgrade the firmware on a Micron 7400 NVMe SSD using either nvme-cli or msecli. For further assistance with this process please contact your local Micron representative.

Upgrade using nvme-cli

1. Download and install latest version of nvme-cli from github.com:

   • https://github.com/linux-nvme/nvme-cli/releases

2. Obtain the required Micron 7400 SSD Firmware from your Micron contact orwww.micron.com:

   • Firmware name: Micron_7400_E1MU23Y5_release.ubi

3. List the SSDs in the system:

   • nvme list
     Note: The target name (nvmeX) for the SSD

4. To download the firmware, use the following nvme-cli commands:

   • nvme fw-download /dev/nvmeX -f Micron_7400_E1MU23Y5_release.ubi

5. To commit and activate the firmware, use the following nvme-cli command:

   • nvme fw-commit /dev/nvmeX -s 2 -a 3

6. Perform a power cycle to the SSD

   • This is required for the firmware changes in E1MU23Y5 to take effect

7. Confirm the firmware has been successfully updated to version E1MU23Y5

   • nvme list

Upgrading using msecli

1. Download and install the latest version of msecli from micron.com:

   • https://www.micron.com/products/solid-state-storage/storage-executive-software

2. Obtain the required Micron 7400 SSD Firmware from your Micron contact orwww.micron.com:

   • Firmware name: Micron_7400_E1MU23Y5_release.ubi

3. List the SSDs in the system:

   • msecli -L
     Note: The target name (nvmeX) for the SSD

4. To download and activate the firmware, use the following msecli commands:

   • msecli -F -U Micron_7400_E1MU23Y5_release.ubi -n /dev/nvmeX -S 2

5. Perform a power cycle to the SSD

   • This is required for the firmware changes in E1MU23Y5 to take effect

6. Confirm the firmware has been successfully updated to version E1MU23Y5

   • msecli -L

FAQ

• Where can I download the latest version of nvme-cli?
  You can download the latest version of nvme-cli from GitHub.

• Where can I find the Micron 7400 SSD Firmware?
  The firmware can be obtained from your Micron contact or from Micron’s official website at www.micron.com.

• What is the name of the firmware file for the Micron 7400 SSD?
  The firmware file is named Micron_7400_E1MU23Y5_release.ubi.

• How do I confirm the firmware update was successful?
  You can confirm the firmware update by using the command nvme list for nvme- cli or msecli -L for msecli, and verifying the version is updated to E1MU23Y5.

• Is a power cycle necessary after updating the firmware?
  Yes, a power cycle is required for the changes to take effect after updating the firmware.

Micron Technology, Inc., reserves the right to change products or specifications without notice. ©2023 Micron Technology, Inc. All rights reserved.

References

• Releases · linux-nvme/nvme-cli · GitHub
• Storage Executive Software | Micron Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>