intratone 32-0003 Dita Create Module Camera Instructions

June 15, 2024
intratone

intratone 32-0003 Dita Create Module Camera

AUDIO CALL

VIDEO CALL

DIMENSION

Drill the support

Support:

  • Thickness 8 mm maximum.
  • Push the rear support in as far as possible, then adjust the tightening with the screws.
  • Check that all notches in the frame are in place.

Space between two modules (example):

Connection of the different éléments :

For laying a label number (32-0004) greater than 28, use a Repeater (32-1002).

Numbering of the buttons:

  • We must define the number of each label, this number will be useful in the management site www.intratone.info
  • At the back of the camera module, there is an “Init” button. Press it for 10 seconds.
  • All screens will show “??? “. Press the label keys in the desired order from first to last. 30 seconds of inactivity close the configuration.

www.intratone.info.

Warranty Operating Guarantees

  • The VIDEO INTERCOM WITH DIGITAL NAME is guaranteed within a temperature range of -20°C and +60°C and at a relative humidity level not exceeding 70%.
  • It must be installed according to the Top/Bottom directions given in these instructions and on the device.
  • The installation must be carried out by qualified personnel with the necessary knowledge for a safe assembly of the equipment.
  • This kit includes the necessary elements to ensure a safe installation of the equipment. Finland, Norway, Sweden: Do not install outside because of extreme temperature.

End-of-life recycling of the product:

  • The VIDEO INTERCOM WITH DIGITAL NAME and its accessories must not be discarded with unsorted municipal waste, but must be disposed of via the WEEE (Waste Electrical and Electronic Equipment) collection and recycling system.

Simplified declaration of conformity

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

intratone User Manuals

Related Manuals