alnor KNG-125-1P KNG Gypsum Ventilation Diffuser Instructions
- June 15, 2024
- alnor
Table of Contents
alnor KNG-125-1P KNG Gypsum Ventilation Diffuser
Product Information
- Specifications
- The Ventilation finish trim Gypsum diffuser KNG has the following specifications:
- Material: Gypsum
- Product code example: KNG-125 – 1P
- Product code options: KNG-100-1P, KNG-125-1P
- Dimensions:
- H [mm]: 90 (for KNG-100-1P), 85 (for KNG-125-1P)
- Weight [kg]: 0.280 (for KNG-100-1P), 0.285 (for KNG-125-1P)
Product Usage Instructions
- Step 1 : Installation
- To install the Ventilation finish trim Gypsum diffuser KNG, follow these steps:
- Choose the appropriate product code based on your requirements.
- Prepare the installation area by ensuring it is clean and free from any obstructions.
- Position the gypsum diffuser in the desired location.
- Secure the gypsum diffuser using suitable screws or adhesive, depending on the surface.
- Step 2: Adjusting Volumetric Flow Rate
- The volumetric flow rate q [m3/h] can be adjusted using the following chart:
Instructions
- Determine the desired volumetric flow rate (qv) in m3/h.
- Locate the corresponding value on the chart.
- Adjust the ventilation system to achieve the desired flow rate.
Maintenance
- To ensure optimal performance and longevity of the Ventilation finish trim Gypsum diffuser KNG, follow these maintenance guidelines:
- Regularly clean the gypsum diffuser using a soft cloth or brush to remove dust and debris.
- Inspect the diffuser for any damage or cracks. If any are found, replace the diffuser immediately.
- Check the screws or adhesive holding the diffuser in place and tighten or replace as necessary.
FAQS
- Q: What is the material of the Ventilation finish trim Gypsum diffuser KNG?
- A: The material used for the diffuser is gypsum.
- Q: How do I choose the correct product code?
- A: The product code is determined by the size and features you require. Refer to the product code example and dimensions in the specifications section to make your selection.
- Q: How do I adjust the volumetric flow rate?
- A: Use the provided chart to locate the desired flow rate and adjust the ventilation system accordingly.
- Q: How often should I clean the gypsum diffuser?
- A: Regular cleaning is recommended to maintain optimal performance. Clean the diffuser whenever dust and debris accumulate, typically every few months.
Description
- The KNG gypsum ventilation diffuser is designed for installation in ceilings made of plasterboard.
- It is a modern ventilation solution that combines functionality with aesthetics.
- This elegant interior design element is made of high-quality plaster, giving it durability and resistance to damage.
- The gypsum diffuser is not only a functional ventilation element but also a decorative accent that blends in perfectly with different interior styles.
- It can be painted in any color to match the chosen aesthetic of the room.
- Material: gypsum
Product code example
Product code:
Dimensions
Dimension tolerance – ( +/-) 5 mm
Technical specifications
Parameters
The volumetric flow rate q [m3/h] and the total pressure loss Pt [Pa] can be
read off the chart.
dn125 – SUPPLY and EXTRACT
ALNOR® ventilation systems is a registered trademark protected by a technical patent. All modification rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>