alnor DV Series Duct Fan User Manual

alnor DV Series Duct Fan

Product Information

Model| Voltage (V)| Frequency (Hz)| Power (W)| Current (A)| Speed (rpm)| Airflow (m3/h)| Noise Level (dB(A))| Insulation Class| Protection Class (IP)| Weight (kg)
---|---|---|---|---|---|---|---|---|---|---
DV-100| 230| 50/60| 68| 0.28| 2400| 400| 42| H| 44| 2.6
DV-125| 230| 50/60| 76| 0.29| 2350| 500| 43| H| 44| 2.7
DV-150| 230| 50/60| 80| 0.4| 2450| 422| 46| B| 44| 3.0
DV-160| 230| 50/60| 90| 0.4| 2550| 440| 45| B| 44| 3.2
DV-200| 230| 50/60| 90| 0.43| 2300| 735| 46| B| 44| 4.4
DV-250| 230| 50/60| 150| 0.66| 2600| 1200| 57| F| 44| 5.5
DV-315| 230| 50/60| 187| 0.83| 2500| 1900| 68| F| 44| 6.9
DV-355| 230| 50/60| 160| 1.0| 1450| 1300| 45| F| 44| 9.0

Product Usage Instructions

1. Ensure that the product is installed and maintained by authorized personnel.
2. Use protective gloves when handling the product due to sharp edges.
3. If the inlet and outlet of the device remain open, use a filter to prevent foreign objects from entering.
4. Maintain appropriate distances between the ventilation duct before and after the fan.
5. Refer to the connection diagrams provided for different diameters of the product.

Dear Customer,
Products are manufactured in production facilities with ISO 9001: 2008 Quality Management System certificate.

Safety warnings

1. These fans contain rotating parts and electrical connections. Therefore, pay attention to safety warnings during their assembly, maintenance and operation.
2. Electrical connections and assembly must be made by authorized persons.
3. Electrical connections of the fan should not be damaged when the ceiling or the wall is drilled or broken.
4. The product must have an air duct of its own.
5. During transport, operation and maintenance, hands should be protected with gloves against cuts.
6. The fan should in no way be touched while operating.
7. Proper cleaning should be done with periodic intervals; otherwise the product might be harmed.
8. Keep the fan away from children and do not let unauthorized people to use it.
9. Do not use do product at ambient temperature over 40˚C

Dimensions

Technical features

The values declared in the markings on the product or the documents provided together with the product are values obtained in laboratory environments according to related standards. These values can change according to product use and environment conditions.

Assembly

Use mounting supports.

1. Wall mounting holes and the distance to the wall in accordance with feet pierced and insert the dowel.
2. Combine the product with the mounting legs.
3. Leg items available wall mounting.
4. As shown in figure 4 connect the product to the ducts with the clamps.
5. Be sure to connect the power cord to the correct wiring diagram.
6. Make sure you have the appropriate air direction.
7. Make sure that the length of the ventilation duct is sufficient before and after the fan. The lengths depend on the OB fan diameter.
8. Trialthe onerstion of the needuet check for vihestion and error

Wiring connection diagram

for diameters 150, 160, 200, 355:

for diameters 100, 125, 250, 315:

1. The products should only be assembled by authorized persons.
2. Since products have sharp edges, wearing gloves is recommended.
3. If entrance and exit of the products are going to stay open, they should be covered with a culvert to prevent foreign materials from entering.
4. Before connecting electric cables, you must not forget to cut the power supply.
5. When assembling the devices, be sure that all connections are correctly established and that the assembly elements are strong enough to carry the weight of the product.
6. Even if the product is turned off, be sure that the main power supply is off while connecting the devices.
7. Before assembly, check whether the electrical connection information on the product (tension, power, frequency, etc.) conform to the area where the product will be assembled.
8. The terminal box cable inlet should be firmly plugged in. The lid should be closed correctly and should prevent water leakage.
9. There shall not be any obstacles in the air flow route.
10. For safety reasons, the earthing terminal on the electric terminal should absolutely be connected to the building earthing line.
11. Be sure that the motor thermic relay and overload relay are connected correctly.
12. Cable connection of the product should be like the one in the electrical connection diagram.

Usage

• DV series inline duct fans are the ideal fans for air ducting systems where high air flow rate and high pressure is required. They can be mounted in air ducts directly in every required position.
• They can be used in industrial or constructional applications, factories, kitchens, hospitals, fume hoods, offices, laboratories, shopping centers, restaurants, theatres, apartments, etc. The filter should be used in case air pollution. Do not expose the fan into contact with aggressive substances. The fan should be used in accordance with the technical characteristics IP and CL B/F. We recommend the use of thermal protection or short-circuit the fan.
• Users, duct fans and maintenance manual carefully before using this are obliged to read.
• Expected life of the products is 10 years.

When using your product for the first time:

1. Before connecting electric cables, you must not forget to cut the power supply. Be sure that electrical connections of the product are established correctly and safely.
2. Be sure that safety equipment is connected correctly.
3. Properly establish earthing connections.
4. Be sure that the cable and electric connection box are closed correctly and do not admit water leakage.
5. Air exit direction should be in the direction indicated with the label on the body. There shall not be any obstacles in the air flow route.
6. The wings should rotate in the correct direction.
7. While the product is operating, there shall not be any vibration or internal rubbing or hitting voice due to the rotation of the fan or the suction fan.
8. Power supply, current and frequency values shall comply with the product label.
9. If any electricity warning device turns on, electric connection should immediately be cut from the main power supply. Before starting the product, all the installation should be controlled again carefully.
10. If any problem occurs, please consult authorized persons.
11. In case of any defect after you have started using the product continuously, the type of defect should be determined. In order to remove the defect, the technical service must be contacted. You must not try to fix the problem yourself.

Defects and How to Fix Them:

Cleaning, maintenance and transport

• In order to protect your product from being damage during transport
• The product has been packaged according to normal transport conditions. In order to avoid possible damage, it should always be carried in its original package.
• The product shall be kept in its own package in a vibration-free, dust-free environment away from abrasive or chemical material until it is delivered to its place of assembly. Do not accept the products which are not in their original package or which were opened before being delivered to you.
• The products should be stocked into the vehicle in a way to stay motionless in case of any turn over or fall down.
• While heavy products are being carried, use appropriate lifters to protect products or the people carrying the products.
• All necessary measures should be taken in order to prevent damages arising from sudden and careless lifting and putting down.
• The products should be carried one by one carefully. They shall not be thrown or carried carelessly from hand to hand.
• After taking the product out of its package
• The delivered product should be checked.
• The product must be checked for damage during transport. If there is any lost or damaged part, it should immediately be informed to the transporter or our firm verbally or by writing.
• Do not hold the product on its connection box or electric cables. Abstain from applications which will damage the wings or the protective cage while carrying.
• Periodic cleaning and maintenance of the product Before cleaning or maintenance, even if the product is turned off, be sure that electric connection has been cut from the main power supply.
• All electrical equipment should be regularly controlled, connections should be checked and damaged or worn-out cables and equipment should be replaced.
• Periodic maintenance should be carried out at least once every six months or more frequently, depending on its frequency of use. Maintenance and cleaning of the products should be carried out by qualified staff.
• Check the product regularly. In order to prevent dirt or accumulations in the wing, motor or grill, carry out the maintenance according to the operating conditions of the product. Otherwise, the expected life of your product can be substantially shortened or serious damage can occur.
• While cleaning the product, pay attention to protecting the balance on the wing and the turbine.
• Bolts which might become loose during maintenance should be checked.
• Inappropriate parts should be immediately replaced.
• The product should not be cleaned with inflammable or combustible cleaners; it should be cleaned with a wet cloth.
• The product should in no way be exposed to water or pressure water.

Warranty and serve

Dear customer, we believe that providing good service is as important as providing good products for you. You can contact our Sales Representatives by calling us or obtain the most suitable service for you by contacting our Authorized Dealers.

We recommend you to follow the advices below:

1. When you buy a product, have your Authorized Dealer approve the Warranty Dee
2. Use your product according to the user’s manual.

The warranty does not cover the damages arising out of using the product under conditions other than its normal conditions of use. The following conditions are also not included in the warranty:

1. Damages and defects arising out of faulty usage,
2. Damages and defects which occur while loading, unloading or carrying the product after it has been delivered,
3. Damages and defects arising due to low or high voltage, faulty electrical installation and using the product at a different voltage than the one written on its label,
4. Damages and defects due to fire, eathquake, lightening strike, etc.
5. Damages occuring due to using the product under conditions not conforming to the issues stated in the user’s manual.

• The above-mentioned damages are fixed on payment.
• Assembly and transport of the product is not included in the product price.
• The responsibility of approving the warranty deed and submitting it to the customer belongs to the seller, dealer, agency or representative from which the customer has purchased the product.
• Since the invoice will be taken as reference if a misunderstanding occurs about the warranty period, the user must keep the invoice and a copy of it together with the Warranty Deed.
• If the warranty deed is altered, the original serial number on the product is removed or altered; the warranty deed will become invalid.

Warranty terms and conditions

1. The warranty period is 12 months from the date of delivery.
2. The product including all its components is under the warranty of our company.
3. In case of defects within the warranty period ,the period spent in repairing is added to the warranty period. The repairing period is 14 days from the date of delivery to the service, in each case confirmed in the quality control department of the supplier. Repair time could be extended in case necessary order by supplier spare parts. This period starts from the date of delivery of the product to the services centre or in case of absence of service centre to the seller, the agency the representative ,the importer or the manufacturer of the product respectively. In case the defect is not repaired within 30 work-days, the importer or the manufacturer is entitled to supply another product with similar features until the repair is completed.The warranty period of the replaced product is limited with the warranty period of the product which is purchased.
4. The present warranty does not cover damages resulting from use of product against the instructions in the manual.
5. General Administration of Protection of Consumer Rights and Competition in the Ministry of Industry and Commerce may be applied for problems regarding the warranty certificate.

Energy efficiency classes

is a legally protected trademark and technical patent. All rights reserved. www.alnor.com.pl

Documents / Resources

| alnor DV Series Duct Fan [pdf] User Manual
DV-100, DV-125, DV-150, DV-160, DV-200, DV-250, DV-315, DV-355, DV Series Duct Fan, DV Series, Duct Fan, Fan
---|---

References

• Alnor | TSI
• Anasayfa - BVN Air

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>