ZOGOLA Large Fireproof Safe Box Set Instruction Manual
- June 15, 2024
- ZOGOLA
Table of Contents
ZOGOLA Large Fireproof Safe Box Set
Please do not keep emergency keys in your safe!!!
Dear valued customer
Thank you for choosing our products! You’ve taken an important step in organizing and protecting your most valued possessions. Every Series of our safes is professionally made and designed to provide safety. Please take time to read and familiarize yourself with the proper operating procedures of your new safe presented on the following pages.
Again, thank you for choosing our products!
PRODUCT
① Knob
② Yellow Light
③ Red Light
④ Green Light
⑤ Confirming Button
⑥ Battery Compartment and Key Cover
⑦ LED Light
⑧ Reset Button
PACKAGE INCLUDES
- 1 × Safe Box
- 1 × Fireproof Bag
- 2 × Emergency Keys
- 1 × Mounting Accessories
- 1 × Instruction Manual
INITIAL USE
- When first opening, user should open the safe with the emergency key.
- Remove emergency key cover, then insert the emergency key and turn it anticlockwise.
- Turn the knob clockwise to open the door.
CAUTION:
- Finish operation, you need to rotate the knob anticlockwise and turn the key clockwise.
- Pull out the emergency key and keep it in a safe place.
INSERT THE BATTERIES
- Remove the battery compartment.
- Insert 4 × AAA batteries ( Not included ) into the battery box.
- Under normal condition, if the red light is on, it means the voltage is low and you should insert new batteries.
CAUTION:
- Replace 4 new batteries. If the power outage lasts more than 30 minutes, the user code should be reset.
OPEN THE DOOR
- Input your user’s code(3 to 8 digits) or master code(3 to 8 digits), each pressing results one buzzer beep and yellow light flashes;
- Press “#” , the green light will be on;
- Rotate the knob clockwise and pull outwards within 5 seconds, the door will be open;
CAUTION:
- The preset user code “159”. There is no preset master code.
CLOSE THE DOOR
- Turn the knob anticlockwise to close the door.
AUTOMATICALLY LOCKED
- Three continuously wrong entries will activate the warning beep for 20 seconds;
- Another three continuously wrong entries will activate the warning beep for 5 minutes.
SET THE USER CODE
- With the door unlocked, press the reset button. Then start setting code when the buzzer beeps twice and the yellow light goes on;
- Input the new user code(3 to 8 digits), and press the “#” to confirm, it will be confirmed by 2 buzzer beeps and the yellow light flashes twice.
SET THE MASTER CODE
- With the door unlocked, input “00” and press reset button, start setting code when the buzzer beeps twice and the yellow light goes on;
- Input the new master code(3 to 8 digits), and press the “#” to confirm, it will be confirmed by 2 buzzer beeps and the yellow light flashes twice. Then setting is done successfully.
CAUTION:
- If the yellow light flashes with 3 buzzer beeps, which means the code changing is not effective, and you need to try it again.
MOUNTING
- Drill holes for expansion bolts(or clamping screws) in the right place;
- Turn the expansion bolts anticlockwise to separate;
- Use the expansion bolts(or clamping screws) to secure the case to the wall;
- Make sure the case is mounted in place as required and then tighten all screws.
CAUTION:
- Use the expansion bolts when there is the concrete wall surface.
- Use the clamping screws when there is the wooden wall surface.
CUSTOMER SUPPORT
If you have the problem that is not answered in the FAQ section of this manual, please contact us with the order number and the product pictures through the following email. We will offer you help. We encourage you to email us: support@basics-safe.shop
(Or scan the QR code below to contact our email.)
If you are sure to return the Electronic Safe, our customer support team will provide you with return details.
Please prepare the following information available when contacting us:
- Purchaser’s name, mailing address, e-mail address, and phone number.
- Online order number.
- Detailed description of the problem.