ZOGOLA 2.3 Fireproof Waterproof Large Safe Box Instruction Manual

Table of Contents

THE OPERATING MANUAL OF ELECTRIC SAFE

If there is any issue about safe, please contact: support@homesafe.vip

Emergency Key 2| Hidden box keys 2| Foot Mat 4
Fireproof
Document Bag 1
---|---|---
| |
Master Key 2| External Power Box 1| Expansion Bolt *6
| |

Please use the key to open the safe for the first use. The operation is as follows.

Sliding the cover ofmaster keyhole to left and then sliding the cover of emergency keyhole to right exposed lock channel.
Insert the master key into the left keyhole, turn 90° clockwise.
Insert the emergency key into the right keyhole turn 50° counterclockwise.
Rotate the handle clockwise and the door will be opened successfully.
Open the cover of battery box behind the door and put 4 AA alkaline batteries according to the sequence of “+”,”-“. The system is powered on
Then you can try to use the original password to open the safe.
The factory uniﬁed personal password is “1234” and the management password is “123456”.

The safe has 2 sets of initial passwords:administrative password ”123456” and individual password ”1234”, both can successfully open the safe.

Open the safe with the initial password and standby
Enter 00 on the keyboard and press the reset button inside the safe within three seconds, the screen will display “———”
Enter 3-8 digits, then press “#” to confirm
The screen displays “into”, the administrative password reset successfully(123456 is invalid)

Open the safe with the password and standby
Press the reset button inside the safe, the screen will display “—–”
Enter 3-8 digits, then press “#” to confirm
The screen displays “into”, the user password reset successfully(1234 is invalid)

Note: For security reasons, we recommend that you change both the administrative and individual passwords.

Use the key only, master key + emergency key + knob
Insert the master key into the left keyhole, turn 90° clockwise. Then inset the emergency key into the right keyhole turn 50° counterclockwise. Rotate the handle clockwise and the door will be opened successfully.
Use the password only, password + knob

Make sure the battery of safe has enough power
Make sure the master keyhole horizontal before using password
In the standby state, press the “#” key to rouse the system, the screen will display “——-”
Enter correct password and press “#” key to confirm.
The screen will display ”open” and then rotate the handle clockwise to open the door.
If the password is wrong, the error will display on the screen. And then the screen will re-display “——-“, you can input the password again.
If you enter the wrong password for three times the alarm will continue to sound for 60 seconds. The alarm will stop when you enter the correct password.

External battery box + password + knob
When the battery of the safe runs out, you can use the external battery box. And then open the safe with password.

Note: The external battery box is powered by 4 AA batteries which are not included. Never put the external battery box in your safe.

Make sure you have install the battery and the safe has power
Press “*” key directly to enter into the state ofmodifying the system date and time
Input the “year” – “month” – “day” – ”the day of the week”-”hour” – ”minute” in the order by pressing the digital keypad.
It will automatically confirm and save the new date and time after you complete the whole setting.
If you press the wrong digit , please press “*” button one time to eliminate one number. During the setting, if no digit is pressed within 8 seconds, it will exit the modification state and return to the standby state. The setting of your date and time is unsuccessful.
The system will identify the validity of the input numbers, and invalid values beyond the range will not be confirmed.
The valid ranges of each parameter are as follows:
Year: 00-99
Month: 01-12
Day: 01-31
Week: MON-SUN (1-7)

The safe can be mounted to a wall or floor
WLL MOUNTING

Drill the appropriate size holes for the anchors you are using
Carefully press the anchor into the holes at this time
Mount the safe by running screws from inside of the safe and securing to anchors. Ensure the safe is mounted securely

ZOGOLA 2 3 Fireproof Waterproof Large Safe Box - WLL
MOUNTING

FLOOR MOUNTING

Use proper drill tools depending on the type of floor you are mounting the safe (wood, tile, or concrete)
Measure the location of the pre-set drill holes, mark their exact position onto the floor
Drill the appropriate size holes for the anchors you are using
Carefully press the anchor into the holes at this time

DURAL ALARM SYSTERM

The alarm will be issued when enter wrong password 3 times or your safe is hit hard. The alarm will stop when you enter the correct password.
In standby state, if you press “0” key the screen will display “BELL ON” and then enters the vibrating alarm state. In this state, if you move or hit the safe, the alarm will be issued. The alarm will stop and the vibrating alarm will be Automatically dismissed when you enter the correct password.

Working power: four “AA” alkaline batteries
Working voltage range: 4V-7V
Working under voltage point: 4.6V plus or minus 0.20V
Quiescent current is less than 5Ua
When battery of the safe runs out, the date and time will recover to the original. You need to re-set the date and time. But your personal password won’t be changed.