hermitlux HMX-DW04 Table Top Dishwasher User Manual

Tabletop Dishwasher
Manual

Model No.: HMX-DW04

Please read the manual carefully.
It contains important imformation on how to install, use and maintain the machine. Please retain all documents for subsequent use or for next owner.

IMPORTANT SAFETY INSTRUCTIONS

WARNING When using your dishwasher, follow basic precautions, including the following:
a) Read all instructions before using the dishwasher.
b) Use the dishwasher only for its intended function.
c) Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children.
d) When loading items to be washed:

1. Locate sharp items so that they are not likely to damage the door seal;
2. Load sharp knives with the handles up to reduce the risk of cut-type injuries.
   e) Do not wash plastic items unless they are marked * dishwasher safe” or the equivalent. For plastic items not so marked, check the manufacturer’ s recommendations.
   f) Do not touch the heating element during or immediately after use.
   g) Do not tamper with controls.
   h) Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
   i) To reduce the risk of injury, do not allow children to play in or on a dishwasher.
   j) Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for such a period, before using the dishwasher turn on all hot-water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
   k) Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.
3. DO NOT IMMERSE IN WATER.
   m) HOUSEHOLD AND INDOOR USE ONLY.
   n) Itis forbidden to open the door while the appliance is working to avoid personal danger.
   Don’t open the door when washing avoiding to hot water flying out and causing any hurts.

Safety and warning

Warning| 1.Power socket must be grounded, avoiding possible electric leakage or shock;
2.Don’t share one socket with other appliances avoiding to fire;
3.Any new parts or power line will be changed by the service man after damages;
4.Dispose of the machine in an environmentally friendly manner under local regurlations;
5.Do not place the machine in the environment under 0°C, like outside the door in cold weather;
6.Please use salt and detergent which is special for the dishwasher;
7.Don’t place and use the machine on the platform which is not stable, wet, smooth, inflammable avoiding any damage;
8.Don’t place and use the machine within 150mm far from the gas stove or heater;
9.Don’t place any heavy objects on the door when the door opening to avoid the machine turn over;
10.Don’t splash water into the machine avoiding electric shock or fire;
11.Don’tdrink the left water in the machine;
12.Don’t let children operate the machine independently avoiding any dangerousness.
---|---
Precaution| 1.Don’t open the door when washing avoiding to hot water flying out and causing any hurts;
2.Don’t touch the block of the side air outlet;
3.Don’t tilt or move the machine when washing;
4.The knife or others with sharp points don’t face person to avoid any hurts when opening the door;
5.Pleae stop washing, power off, and close the tap when any faults;
6.Please check and clean the machine from time to time for the best washing effect;
7.Please fix the drain hose avoiding to the stained water outflow;
8.Don’t forcibly pull power cord, drain hose, or press cutlery tray avoiding any damage;
9.Don’tuse a wet hand to operate the machine avoiding electric shock;
10.Children should be far from the chemical material such as salt, detergent avoiding to any hurt.

Product Introduction

Machine

Parts list

Control Panel

1.Dry
2.Tank model
3.Tap model
4Displaysoreen
5.Time display| 6.Dry indicator
7.Temperature
8.Door open
9 Standard
10.Quick| 11.ECO
12.Strong
13.Fruit
14.Program selection
15.Start/Pause
16.Power on/off
---|---|---

Installation

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance to electric current. This appliance is equipped with a cord having an equipment—grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.
WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative if you are in doubt about whether the appliance is properly grounded. Do not madify the plug provided with the appliance, if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

1. Inlet hose installation
   1 Connect machine
   Insert the inlet hose elbow into the water inlet behind the machine and tighten the screw.
   2 Connect tap
   A. B. C are three options for tap connection, but B and C options need to make a hole on or behind cabinet for the hose can go through the cabinet.
   Note:
   The product has the characteristic of heating liquid;
   Water temperature does not be over 40°C if use hot water;
   The size of the inlet hose elbow is 1/2″ with internal thread, the tap size must be 1/2″ with outer thread.
   

2. Drain hose installation
   1 Connect machine
   Insert the drain hose elbow into the water outlet behind the machine and tighten the collar.
   2 Connect sewer
   A. B. C are three options for sewer connection, B and C options need to make a hole on or under cabinet in order for the pipe can go through the cabinet.
   Note:
   A hose that attaches to a sink spray can burst if it is installed on the same water line as the dishwasher. If your sink has one, itis recommended that the hose be disconnected and the hole plugged.
   

Tableware Display

1. Please get rid of large food residue on tableware, avoiding blocking water hose.

2. Please make reference to the right picture for tableware display.
   Note:
   In order to fully clean tableware, please tilt tableware internally or put stained face down;
   The capacity of the maximum number of place settings is six.
   

Operation

1. Power on
   Plug in, touch “  “, turn on the machine
   Note:
   Before the program finishing, hold *   ” for 3 seconds to force the machine to turn off.

2. Add detergent
   Open the door, add moderate detergent powder, or 1pc detergent block into the machine, and close the door.
   Note:
   No detergent when fruit washing;
   The dosage: 8-10g each washing circle.

3. Program selection
   Touch “ ”, each of the program indicators will light one by one, select the program you want.

4. Run program
   Touch “   “, run the selected program, the machine will : check water supply automatically.
   
   Note:
   1 The system will automatically check all supplies are appropriate, if the indicators “ ” become red, you need open the tap or fill the tank;
   2 After 5 times checking, there is still no water supply, the machine will enter standby mode;
   3 Touch 1o force pause machine and add tableware during washing;
   4 Touch “ ” for 3 seconds to quit the program, and the machine will drain, then stop;
   5 Touch “Dry ”  to add 73 hours’ circular wind to keep air fresh inside machine.

5. Wash
   The machine has two water supply models, tap model and tank model.
   Note.
   1 The indicator ” ” is white, which means tank model;
   2 The indicator ”   ” is white, which means tap model;
   3 If tank is full, the machine will switch into tank model automatically;
   4 Fill 3 cups (1.8L water pitcher) of water into tank, Di, Di, Di will be sound if the tank is full, the indicator “   ” will become white;
   5 If the tap model, please open the water tap.

Functions

Program| Program execution| Time| Detergent| Temperature| Drying
time| Storage ( if selected )
---|---|---|---|---|---|---
Standard| Hot water washing Cold water rinsing Cold water rinsing Hot water rinsing| 69Min| 8g| Washing 55°C Rinsing 68°C Circulating fresh| 60Min| air 73 hours
Quick| Hot water washing Cold water rinsing Hot water rinsing| 29Min| 8g| Washing 50°C Rinsing 62°C| 60Min| Circulating fresh air 73 hours
Strong| Hot water washing Hot water rinsing Cold water rinsing Hot water rinsing| 89Min| 12g| Washing 60°C Rinsing 550C Rinsing 75°C| 60Min| Circulating fresh  air 73 hours
ECO| Hot water washing Cold water rinsing Hot water rinsing| 59Min| 8g| Washing 550C  Rinsing 68°C| 60Min| Circulating fresh air 73 hours
Fruit| Cold water rinsing
Cold water rinsing| 19Min| /| /| /| /
Dry| /| /| /| /| 60Min| Circulating fresh air 73 hours

Maintain & Clean

1. Clean Filter
   1 Disassemble
   Rotate anti-clockwise to disassemble the filter set, which have 3 parts, filter mesh, main filter and fine filter.
   2 Clean
   Use water to flush and brush each of filter parts. 3 Assemble
   After cleaning, rotated clockwise to close the filter set.

2. Clean spray arms
   1 Disassemble
   Open the door, take out the basket, then pull out the up and down spray arms.
   2 Clean
   Use water to flush and brush each spray arm, use tools with sharp point, like needle to clean holes if needed.
   3 Assemble
   After cleanning, please press each arms into position, make sure the arm can move smoothly.

Fault & problem

1.Fault codes

bending;
2.Power off, and check if anything blocks the filter or drain pipe;
3.Be sure all pipes are not blocked by something.
“E3”| Overflowing| Tilt the machine to 30-45 degrees, and let water flow out from the base of
machine, restart the machine, if still show fault, contact our serviceman.
“ELY| Temperature| Restart the machine. if still show fault, please contact our serviceman.
“E5”| Massage
“E6”| Heating
“E7”| Pressure

2.Problem(1)

Tableware is
not clean| Incorrect tableware loading| Be sure enough gap between tableware
Spray arm trapped| Be sure nothing traps the spray arm
Blocked spray arm| Clean spray arm
Blocked filter| Clean filter set
Incorrect filter installation| Correctly assemble the filter set
Incorrect program selection| Select appropriate washing program
No detergent| Add detergent (block/powder/liquid)
Don’t start the machine| Water shortage| Add water till the indicator light off
Door does not close fully| Check the door if anything stops closing fully
Can not
select program| Be washing| Re-select the program after stopping the in- progress program or wait in-progress program finishing

2.Problem(2)

program with a lower temperature
Detergent left| Blocked spray arm, no water flush detergent| Be sure the spray arm moves smoothly
Detergent with poor quality| Use qualified detergent

2.Problem(3)

detergent for the dishwasher;
2.Open the machine, and wipe out the foam by hand;
3.Fill 2-3L water into the machine, and select any program, after 1-2min, the foam will be drained, repeat the process if needed.
Abnormal sound in the machine| Spray arm knock tableware| Correctly set the tableware
Tableware move slightly| Fix tableware before washing
Egg custard left on the tableware| Portein solidification| Clean the tableware with egg custard by hand
Water drops left inside of machine| Drying time is not enogh| Select “Dry” program

Specification

Machine

Electrical Drawing

RoHS Requirement

Hazardous substances content

Components| substances
Pb| Hg| Cd| Cr6+| PBB| PBDE

_

Plasti parts| 0| 0| 0| 0| 0| 0
Metal parts| 0| 0| 0| 0| 0| 0
Rubber parts| 0| 0| 0| 0| 0| 0
Screws| 0| 0| 0| 0| 0| 0
Stickers| 0| 0| 0| 0| 0| 0
Heat plate| 0| 0| 0| 0| 0| 0
Wire| 0| 0| 0| 0| 0| 0
Water pumps| 0| 0| 0| 0| 0| 0
PCB, Fan| X| 0| 0| 0| 0| 0
Water valve| 0| 0| 0| 0| 0| 0
Parts of others| 0| 0| 0| 0| 0| X
The table is made according to SJ/T11364 standards.
0: indicates the hazardous substance contain is below the limit of GB1T26572 standards.
X: indicate the hazardous substance contain is over the limitation of GB1T26572 standards, but fit for the RoHS order.
The information in the table is offered by suppliers, under the present skills, we will keep the best level of the hazardous substances in all of the machine parts and try our best to lower the level of the hazardous substances in the machine through improving the technologies constantly.

ZHIYUAN APPLIANCES CO.,LIMITED
3/F WORKINGTON TOWER 78 BONHAMSTRAND SHEUNG WAN HK
Email:support@hermitiux.com Website: www.hermitlux.co.uk

Warranty Card

NOTE.
Foreasierreference,pleasent Original Sales Invoice or Official Receipt when claiming warranty.
The Manufacturer and/or Exclusive Distributor has the sole discretion in determining the cause of defects.

IMPORTER
COMPANY NAME: Zhong Shan Shi Zhi Mei Dian Qi You Xian Gong Si
ADDRESS : Yong Hui Lu 37 Hao Wu Lou Zhi Yi Zhong Shan Shi Nan Tou Zhen Guang Dong Sheng 528427 CN
E-mail: support@hermitlux.com
MANUFACTURER
COMPANY NAME:
Guangdong Jienuo Electric Appliances Co., Ltd.
ADDRESS:
No.23 Yonghui Rd. Nantou Town, Zhongshan, Guangdong, China
COMPANY NAME:
EVATOST CONSULTING LTD
ADDRESS:
Suite 11.First Floor,Moy Road Business Centre,Taffs Well,Cardiff,Wales,CF15 7QR
E-mail: contact@evatmaster.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>