VISIONAIR 1VAHW152P Milkhouse Electric Heater Owner’s Manual
- June 15, 2024
- VISIONAIR
Table of Contents
**VISIONAIR 1VAHW152P Milkhouse Electric Heater Owner’s Manual
**
TECHNICAL DATA
Model: 1VAHW152P and 1VAHW153P
Voltage : 120V~ / 60Hz /12.5A
Watts : 1300W Low / 1500W High
BTUs: 5120
Features:
- Adjustable Thermostat with Anti-freeze Setting
- Front Mounted Control Panel
- Power Indicator Light
- Safety Overheat Protection
- Safety Tip-Over Protection
- Convenient Carry Handle
- Sturdy Metal Frame
- 3-Prong plug (1VAHW153P only)
CONSUMER PRODUCT INFORMATION
For your own records, please attach a copy of your sales receipt to this manual. Also, write the store name/location and date purchased below:
Store Name: ___
Location:__ ____
Date Purchased: _ __
IMPORTANT NOTE:
Read the manual carefully. Make sure to save this manual for future reference.
Illustrations in this manual are for explanatory purposes only, your actual
product may look slightly different.
SAFETY GUIDELINES
INTENDED USE:
This product is intended for indoor residential and office use only, not for industrial or other commercial application. Use only with electrical wiring that is in good working order and that meets applicable codes and ordinances. This heater must be plugged in to a 120V AC, 15 Amp. (or larger) circuit. Do not plug anything additional into the same circuit. If you have any questions whether your wiring is adequate, consult a qualified electrician. Risk of fire, overheating, malfunction, property damage, injury or even death may result if not adhered to. Use your heater/fan only with a working smoke detector located in the vicinity of your heater/fan.
While using your heater/fan, you should follow the IMPORTANT INSTRUCTIONS listed below. As part of those instructions, we have used the word “WARNING” to indicate the level of hazard: WARNING indicates a hazard which, if not avoided, could result in injury or death.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
- Read all the instructions before using this heater/fan.
- This heater/fan is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use provided handle when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 meters) from the front of the heater/fan and keep them away from the sides and rear.
- Do not use heater unattended. Use of extreme caution is necessary when any heater is used by or near children, invalids, disabled persons or pets.
- Do not operate the heater with a damaged power cord or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment or repair.
- Do not use heater outdoors.
- Use your heater only in dry environments. This heater is not intended for use in a bathroom, laundry area, or similar locations, or near sinks, washing machines, swimming pools or other sources of water. Never locate heater where it may fall into a bathtub or other water container. Do not use in damp environments such as flooded basements.
- Do not place the heater on a small, unlevel, uneven or any surface which might allow heater to tip or fall.
- For proper operation, heater should be placed on a smooth, non-combustible surface. Do not place on rugs, carpet, vinyl flooring or other plastic surfaces. Not for use outdoors or in wet areas.
- This heater is not designed as a primary heat source.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip). Always unplug heater when not in use.
- Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Arrange cord away from traffic area where it will not be tripped over.
- To disconnect heater, turn controls off then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons or property.
WARNING: SHOCK HAZARD
Use your heater only in dry environments. This heater is not intended for
use in a bathroom, laundry area, or similar locations, or near sinks, washing
machines, swimming pools or other sources of water. Never locate heater where
it may fall into a bathtub or other water container. Do not use heater
outdoors. Do not use in damp environments such as flooded basements.
WARNING: HOT SURFACES
Do not touch body of heater when in use. This heater is hot when in use, to
avoid burns, do not let bare skin touch hot surfaces. If provided, use handles
when moving this heater.
WARNING: FIRE HAZARD
Heater has hot and arcing or sparking parts inside. Do not use near
combustible materials or flammable gases or sources of heat. DO NOT USE in
areas where gasoline, paint or flammable materials are used or stored. Keep
combustible materials such as furniture, pillows, bedding, papers, clothes and
curtains at least 3 feet (0.9 meters) from the front of the heater and keep
them away from the sides and rear. To prevent a possible fire, do not block
air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed,
where openings may become blocked. Do not insert or allow foreign objects to
enter any ventilation or exhaust opening as this may cause an electric shock,
fire, or damage the heater.
WARNING: ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use with adequate electrical system
that is up to code. The supply cord has a polarized plug. As a safety feature
this plug will fit in a polarized outlet only one way. To prevent electric
shock, match wide blade of plug to wide slot, fully insert plug. If the plug
does not fit contact a qualified electrician. Do not operate any heater with a
damaged cord or plug or after heater malfunctions, has been dropped or damaged
in any manner. Do not operate heater with a broken heating element or ceramic
cone or any visual imperfections.
PET OWNERS NOTE
The health of birds and some small pets are extremely sensitive to the fumes
given off during the initial use of many appliances. Although these fumes are
not harmful to humans, it is recommended that this heater not be used around
birds and small pets during its initial use until the manufacturing corrosion
coatings burn off.
USAGE
HEATER OPERATION
Always operate the heater in the upright position following all instructions
and recommendations listed in this manual.
HEATER LOCATION
Place the heater in the area of the room that is coldest.
HEATER CONNECTION
Plug heater directly into 120 Volt AC, 60Hz wall outlet. Be sure plug fits
tightly in outlet. A loose connection may cause overheating and damage to the
plug or heater. This product must be plugged directly into a wall outlet.
Never use any type of extension cord or outlet adapter with this high wattage
product. To prevent overloading a circuit, do not plug the heater into a
circuit that is servicing other large or small appliances.
ASSEMBLY INSTRUCTIONS
Before initial use some assembly is required. With a phillips screwdriver,
attach handle to heater body using screws provided as shown in the photo at
right.
TURNING HEATER ON
To start the heater, turn the ON/OFF Power Level/Fan Dial from the OFF
position to the 1300 or 1500 watt setting. Then rotate the Thermostat Control
clockwise to the HIGH THERMOSTAT position as described below. (During the
heaters initial use, you may experience a slight odor or smoking. This is the
result of the heating element lubrication “burning off”. This is normal and
will go away after a few minutes of use).
CONTROL PANEL
POWER LEVEL SWITCH
This heater has two heat settings: 1300 and 1500 watts. Use the higher setting
(1500 watt) to raise the room temperature quickly. When the desired
temperature is reached use the lower 1300 watt setting. It is usually
sufficient to maintain a comfortable temperature.
ADJUSTABLE THERMOSTAT WITH ANTI-FREEZE SETTING
After heater has been turned on and the room has reached the desired
temperature, slowly rotate the thermostat knob counter-clockwise until the
heater shuts off (you should hear a faint “click”). By leaving the thermostat
at this setting it will automatically maintain this temperature. To lower
temperature, rotate the knob further counter-clockwise (towards the LOW
position). To raise the temperature, rotate the thermostat knob clockwise
(towards the HIGH position). When set to the Anti-Freeze setting, the Heater
will turn on whenever the temperature drops below 40°F, which is helpful to
economically prevent ice formation in garages and other unheated spaces.
TURNING HEATER OFF
Turn the ON/OFF Power Level/Fan Dial to the OFF position before unplugging or
plugging in the heater. Heater should be unplugged when not in use. To
disconnect heater, turn controls to OFF, then remove plug from outlet. Do not
wrap the cord around the unit tightly for storage, this will cause damage long
term to the cord.
TO OPERATE FAN ONLY
Turn the On/Off Power Level Control dial to the Fan setting. Turn thermostat
fully clockwise so the fan will run continuously.
SAFETY FEATURES
This heater includes a visual alarm to warn that parts of the heater are
getting excessively hot. If the caution light comes on, immediately turn the
heater off and inspect for any objects on or adjacent to the heater that may
cause high temperatures. DO NOT OPERATE THE HEATER WITH THE CAUTION LIGHT
ON. The power indicator light, located near the power control, lights
whenever the heater is turned on. The heater is equipped with an automatic
overheat protection device located inside the body of the heater. If the
heater grille is obstructed, or if the heater gets too hot for any reason, the
automatic overheat protection device will turn the heater off. To reset the
heater, simply turn power off and unplug the heater for 10 minutes until it
cools down and then you may plug the heater in and restart. Be sure that the
heater is on a smooth level surface with no obstructions. The heater is also
equipped with a safety tip-over switch to turn power off to the heater when
the heater tips over. To resume heater functions simply stand heater upright.
CARE AND MAINTENANCE
CLEANING
CAUTION – Before cleaning the heater be sure to disconnect power cord and
allow the heater to cool completely. This heater should be cleaned at least
once a year to maintain proper performance. Clean the outside surface with a
clean damp cloth. Do not use harsh chemical or abrasive cleaners. DO NOT
IMMERSE THE HEATER IN WATER. Allow heater to dry completely before use.
REPAIR
DO NOT OPERATE THE HEATER WITHOUT THE GRILLE IN PLACE. DO NOT USE THE HEATER
IF IT HAS MALFUNCTIONED OR BECOME DAMAGED IN ANY WAY. RETURN HEATER TO
AUTHORIZED FACILITY FOR EXAMINATION, ELECTRICAL OR MECHANICAL ADJUSTMENT OR
REPAIR.
STORAGE
Keep original carton for storage of the heater. Coil and tie the power cord to
avoid damage during storage.
4560 W. 160th Street
Cleveland, OH 44135
833-950-1185 |
support@visionairproducts.com
www.visionairproducts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>