TECKNET M003 PRO Cordless Mouse User Manual

TECKNET M003 PRO Cordless Mouse

Product Layout

System Requirements

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0
• Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10

Technical Specifications

• Button Count : 6 buttons
• Operating Frequency : 2.4GHz
• Receiver interface : USB version 2.0
• Operating Voltage : 3.0V
• Operating Current : 10 mA
• Transmission Power : 3.23dBm

Package Contents

• 1 x Cordless Mouse
• 1 x USB Nano Receiver
• 1 x User Manual

Product Instructions

Battery Installation

The mouse uses two AAA batteries (Batteries not included)

1. Open the battery cover.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity markings.
3. Close the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the mouse. The red low battery indicator LED will flash.
   Note : Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.
   

Receiver Connection

Remove the USB Nano receiver and plug it into a free USB port on your computer. Turn on the mouse. The Plug & Play function of your system will detect a new device has been connected and install it automatically

Note : The receiver can be removed and stored next to the battery compartment while not in use.

Intelligent Power Saving (IPS)
The mouse is equipped with Intelligent Power Saving (IPS) function.

DPI Switch
Press the DPI button to cycle through 5 DPI levels.

Low Power Indicator

When the battery power gets low during the period of use, the low power indicator will flash to remind you to replace the battery.

Note : We recommend you use AAA alkaline dry cell batteries.

Reconnection

The Mouse and Nano Receiver may need to be reconnected if subjected to high temperature, electromagnetic fields or strong vibrations.

1. Press the right button and middle button (under the scroll wheel) simultaneously (Do not release both buttons until you have completed step 3);
2. Plug the USB Nano receiver into a free USB port of your computer within 15 seconds.
3. Then release both buttons.

Attention

1. Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
2. Avoid using the mouse on a metal surface. Metals, such as iron, aluminium or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
3. If your PC has a metal case that contains aluminium or magnesium, use the mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the PC.
4. Please remove the batteries if you are not going to use it for a prolonged period of time (several weeks or months).

Note on handling batteries

• Keep batteries out of the reach of children.
• Replace old or weak batteries promptly.
• Remove the batteries if the mouse is not going to be used.

Safety Measures

• Keep the mouse away from young children.
• Any attempt to disassemble, adjust or repair the mouse may result in exposure and other safety hazards.

Troubleshooting

What do I do if the mouse does not work?

• Make sure that the polarity of the batteries is correct.
• Make sure the batteries are not discharged.
• Please try to remove the batteries, and reinstall the batteries again.
• Verify that your computer’s power management features are turned off.
• Check that the Nano receiver’s USB connector is firmly attached to the USB port of your computer.

The USB Nano receiver is recognized by Windows (Windows2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10) but the cursor does not move.

• Check whether the low power indicator lights up. If the indicator lights up, it is likely that the batteries are discharged. Please replace them.
• If replacing the batteries does not help, it is likely that the mouse is not connected to the receiver. Please try reconnection and ensure that the mouse is within the optimal operational working distance (1.5m) from its USB Nano receiver.

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS

1. RETAIN THESE INSTRUCTIONS – This sheet contains important safety and operating instructions.
2. Before using the product, read all instructions and caution markings on the product, accessories, and device.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. Keep the product away from the fire to avoid an explosion.
6. For proper insertion, please observe polarity indicators (+/-).
7. Remove the batteries if the product is not going to be used for a long period.
8. Do not place the product in or near an inflammable, explosive, or hazardous object.
9. Do not operate the product if it has been damaged in any way.
10. Do not disassemble the product. Disassembly may result in a risk of safety hazards.
11. Do not throw or shake the product.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type M003 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Limited 12-Month Warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product

( Waste Electrical & Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

References

• TECKNET EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>