Yealink EHS61 Wireless Headset Adapter User Guide

Yealink EHS61 Wireless Headset Adapter

Package Contents

User Guide

Connect the IP Phone and Headset

Mitel & Unify Phone

Note
For Mitel Phones, you need to go to the phone’s setup menu to enable the EHS feature for the first time. Once the phone is configured, you can connect the EHS61 cord and headset.

1. In the Settings interface, press Audio->Audio Mode to select Headset or Speaker/Headset or Headset/Speaker.
2. Return to Settings interface, press Audio->Headset to select DHSG is ON.

For Unify Phones, you can plug and play

Yealink IP Phone

For Yealink Phones, you can plug and play

Regulatory Notices

• Operating Ambient Temperatures
• Operating temperature: +14 to 113°F (-10 to 45°C)
• Relative humidity: 5% to 90%, non-condensing
• Storage temperature: -22 to +158°F (-30 to +70°C)

Warranty

Our product warranty is limited only to the unit itself when used normally by the operating instructions and the system environment. We are not liable for damage or loss resulting from the use of this product or for any claim from a third party. We are not liable for problems with the Yealink device arising from the use of this product; we are not liable for financial damages, lost profits, claims from third parties, etc., arising from the use of this product.

Explanation of the symbols
DC symbol is the DC voltage symbol.

WEEE Warning symbol
To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately.

Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive. Statements of compliance can be obtained by contacting support@yealink.com.

Safety Instructions
Save these instructions. Read these safety instructions before use!

General Requirements

• Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
• During the process of storage, transportation, and operation, please always keep the device dry and clean, to avoid collision and crash.
• Please attempt not to dismantle the device by yourself. In case of any discrepancy,
• please contact the appointed maintenance centre for repair.
• Please refer to the relevant laws and statutes while using the device. The legal rights of others should be respected as well.

Environmental Requirements

• Place the device in a well-ventilated place. Do not expose the device to direct sunlight.
• Keep the device dry and free of dust.
• Do not place the device on or near any inflammable or fire-vulnerable
• object, such as rubber-made materials.
• Keep the device away from any heat source or bare fire, such as a candle or an electric heater.

Operating Requirements

• Do not let a child operate the device without guidance.
• Do not let a child play with the device or any accessory in case of accidental swallowing.
• Please use the accessories provided or authorized by the manufacturer only.
• The power supply of the device shall meet the requirements of the input voltage of the device. Please use the provided surge protection power socket only.
• Before plugging or unplugging any cable, make sure that your hands are completely dry.
• Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near swimming pool.
• During a thunderstorm, stop using the device and disconnect it from the power supply.
• Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strikes.
• If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
• When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately.
• Contact the specified maintenance centre for repair.
• Do not insert any object into equipment slots that are not part of the product or auxiliary product.
• Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.

Cleaning Requirements
Use a piece of soft, dry and anti-static cloth to clean the device.

Troubleshooting

The usage environment is out of the operating temperature range. Use in the operating temperature range. The cable between the unit and the Yealink device is connected incorrectly. Connect the cable correctly. Some dust, etc., may be in the port. Clean the port. Contact your dealer or authorized service facility for any further questions.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: this device may not cause interference; and this device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity
DATE: 8th / October /2021
We, YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C

Declare that the product
Type: Wireless Headset Adapter
Model: EHS61 meets the essential requirements and other relevant provisions according to the following EC directive
Directive: 2014/30/EU

Conformity
The product complies with the following standards:
Safety: IEC 62368-1:2014
EMC: EN 55032:2015
EN 55035:2017

YEALINK (XIAMEN) NETWORK TECHNOLOGY CO., LTD WWW.YEALINK.COM
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the Council of 8 June 2011 and 4 June 2015 on the restriction of the use of certain hazardous substances in electrical and electronic equipment(RoHS 2.0) Directive 2012/19/EU of the European Parliament and the Council of 4.July.2012 on Waste electrical and electronic equipment(WEEE) Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18.December.2006 on Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH)

Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service, we sincerely recommend you use the Yealink Ticketing system
(https://ticket.yealink.com) to submit all your technical issues.

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD.

Web: www.yealink.com
Copyright2022 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO., LTD. All rights reserved.

References

• Yealink Support
• Yealink Ticket

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>