fingers 1686234143 SoundFlame Portable Speaker User Guide
- June 15, 2024
- fingers
Table of Contents
fingers 1686234143 SoundFlame Portable Speaker
Important – Warnings and Safety
- Do not place the speaker near heat sources such as fire, radiators, stoves and other apparatus that produce heat.
- Use only accessories supplied by FINGERS.
- Unplug the speaker once it is fully charged, when unused for long periods of time or during lightning/thunderstorms.
- It is recommended to refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
Care and Maintenance
- Switch off the speaker before cleaning it.
- Use soft, damp cloth to clean the surface.
- Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia or abrasives.
- Do not allow any liquid to enter into any of the openings.
In the box
- 1 x FINGERS SoundFlame
- 1 x Remote Control
- 1 x USB-C Charging Cable
- 1 x AUX Cable
- 1 x Quick Start Guide
- 1 x Brand Note
Connections
- AUX port
- LED indicator
- Type-C port for Charging
- USB Port 5. MicroSD Card port
On-board Controls
Function What to do
-
Play/Pause
Play/Pause Short Press
BT Disconnect Long press in BT mode -
Volume Up/Next
Track Increase Long Press
Volume Next Track Short Press -
Volume Down/Previous
Track Decrease Long Press
Volume Previous Track Short Press -
Mode
Navigate across different playback options Short Press to switch modes from BT/USB/MicroSD/Aux -
RGB Lights
Switch to different colours Short Press
RGB On-Off Long Press -
Power On-Off
Power On-Off Short Press
Charging
A red light indicates that it is in charging mode. Once it is completely
charged, the Red LED turns to green.
Modes
You can enjoy your music in the following way
- BT
- MicroSD
- AUX
- USB
ВТ
-
When the device is switched on, it automatically goes to BT mode.
-
If any source is connected (USB, MicroSD or AUX), press “MODE” till BT Mode is heard.
-
As it flashes blue, make sure that Bluetooth is enabled on your device. Find the device list and select FINGERS SoundFlame. A sound prompt of “Connected” is heard and it is ready to play. BT Available devices • FINGERS SoundFlame ON
Connect 2 BT devices using Multi-Point Technology- Turn off BT function of first connected device, and search FINGERS SoundFlame in 2nd device.
- Repeat above steps (3 & 4) to pair another device.
- Turn off FINGERS SoundFlame portable speaker, once 2nd device is connected successfully.
- Turn on BT function on 1st device and FINGERS SoundFlame portable speaker.
- As speaker remembers previously connected devices
-
When switched on, it attempts to reconnect both previously paired devices.
- Now the Speaker is ready to use, by both the paired devices.
MicroSD
- Insert the MicroSD card in the provided port.
- You can then play your favorite tracks directly from the MicroSD Card.
AUX
- If you wish to listen to music from mobile devices, plug in the AUX cable in the Aux port.
- You can then stream music directly from your mobile devices
USB
- Insert the USB device (Pen Drive) in the provided port.
- You can then play your favourite tracks directly from the USB.
Remote
-
STBY : Switch between operation mode and standby mode.
-
Mode : Switch between various modes BT I MicroSD I USB I Aux.
-
EQ: EQ key : Short press to switch EQ, order “Normal-Rock-Pop-Classic-Jazz-Country”; The default is Normal
-
Mute : Short press to enter mute and press again to cancel mute.
-
Play/Pause : Short press to play/pause.
-
Volume Up/Next Track: Short press to next song. Long Press to increase the volume level
-
Volume Down/Previous Track : Short press to Next Song. Long Press to increase the volume level
-
Rep
Function What to do
- Repeat Single track 1st Short press
- Go to Folder 2nd Short press
- Repeat all 3d Short press
- On-Off RGB lights Long Press
-
0-9 number pads : When USB and Micro SD card mode, you choose the song quickly. For example: if you need to choose the 258th song, you can press “2” “5” “g” and wait for 1 second, it will turn to the 258th song and play automatically. If there is no song you chose, it will continue to play the current song.
Product Specifications
Parameters SoundFlame
- Wireless Protocol Bluetooth v5.3
- Peak Output Power 16 W
- Power Rating DC 5 V / 1 A max
- Power Source DC 5 V / 1 A
- Driver unit 40 8W
- Effective Range 2 Wireless range up to 10 m
- Battery 2400 mAh / 3.7 V
- Charging Time Up to 2.5 hours
- Playback Time Up to 4 hours
- Playback Options * Bluetooth® | AUX I USB I MicroSD
- Dimensions 405 (L) x 88 (W) x 75 (H) mm
- Weight 940gm
- Colours Rich Black
Ver.: 1.0.0
fingers.co.in
‘Tested under ideal conditions and in BT playback mode. Playback time may vary depending on usage, playback mode and volume levels. 2WS function can only be enabled to pair two SoundShuttle Portable Speakers.
- Images shown may vary from actual product.
- Specifications, features and appearance are subject to change without notice.
- All logos, brands, trademarks and product names are properties of their respective owners.
- Product warranty is governed by warranty terms mentioned on www.fingers.co.in
- This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website www.fingers.co.in
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>