Aqua-Scope BVSDRY01 Dry Contact Controlled Ball Valve User Manual

: June 15, 2024
: Aqua-Scope

Table of Contents

Aqua-Scope BVSDRY01 Dry Contact Controlled Ball Valve
Declaration of Conformity
Disposal Guidelines
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Aqua-Scope BVSDRY01 Dry Contact Controlled Ball Valve

This retrofittable product transforms a standard ball valve for shutting off water or gas into a remotely controlled smart device. Using a converter, the radio-controlled device can be controlled directly by alarm systems or smart home systems via a switch contact. The converter is installed directly in the alarm control panel or near other control electronics and communicates with the motor via an encrypted radio link. The motor is completely waterproof (IP66) and can therefore be used in climatically difficult environments or outdoors.

The product consists of an Aqua-Scope ball valve actuator BVSLWE01 in combination with a generic LORA device GENLWE01, which is already connected upon delivery and thus requires no further setup effort. The converter can be powered either by a 3.0-3.6 V battery or a 5 – 12 V power supply, which is usually already available in smart home or alarm systems. For testing, the converter can also be supplied with USB-C. The connection is made via screw terminals.

The retrofittable motor is mounted on the ball valve via variable clamps. Pipe diameters between 0.5 and 1.5 inches are supported. Thanks to the patented motor coupling to the actual shut-off valve, high torques of up to 8 Nm can also be transmitted and thus even very stiff shut-off valves can be retrofitted. A button can also be used to switch the motor directly on site and a red/green LED indicates the status of the valve. For more information about the BVSLWE01 valve drive or the GENLWE01 generic LoRa device for control via switching contacts, please refer to the respective product manuals.

Support and Contact
Should you encounter any problem, please allow us to address it before returning this product. Please check our website www.aqua-scope.com and particularly the support section for answers and help. You can also send a message to info@aqua-scope.com

While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. Aqua-Scope shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software supplied with this product and the use of its contents are subject to written authorization from Aqua-Scope. We reserve the right to make any alterations that arise as a result of technical development.

Phone: +372 (0) 624 8002
Mail: support@aqua-scope.com
Web: www.aqua-scope.com

Declaration of Conformity

Aqua-Scope Technology OÜ, Sakala 7-2, 10141 Tallinn, Republic of Estonia, The radio-emitting device works on frequency 868…869 MHz with an output power of 22 dBm. (158 mW)

Disposal Guidelines

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging health and well-being.