DeWALT DCD991 18V 2 x 5Ah Li-Ion XR Brushless Cordless Twin Kit Instruction Manual
- June 15, 2024
- Dewalt
Table of Contents
- DeWALT DCD991 18V 2 x 5Ah Li-Ion XR Brushless Cordless Twin Kit
- Technical Data
- Product Information
- Definitions: Safety Guidelines
- Battery Packs
- Labels on Charger and Battery Pack
- Package Contents
- Description
- Product Usage Instructions
- ASSEMBLY AND ADJUSTMENTS
- OPERATION
- MAINTENANCE
- BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF887
- Technical Data
- Important Safety Instructions for All Battery Chargers
- Frequently Asked Questions (FAQ)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DeWALT DCD991 18V 2 x 5Ah Li-Ion XR Brushless Cordless Twin Kit
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable partners for
professional power tool users.
Technical Data
The vibration emission level given in this information sheet has been measured in accordance with a standardized test given in EN60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
The DCB107, DCB112, DCB113 and DCB115 chargers accept 10.8V, 14.4V, 18V Li-Ion XR and XR FLEXVOLTTM battery packs (DCB123, DCB127, DCB141, DCB142, DCB143, DCB144, DCB145, DCB181, DCB182, DCB183, DCB183B, DCB184, DCB184B, DCB185 and DCB546) battery packs. The DCB118 charger accepts 18V Li-Ion XR and XR FLEXVOLTTM battery packs (DCB181, DCB182, DCB183, DCB183B, DCB184, DCB184B, DCB185 and DCB546).
Fuses:
Europe| 230V tools| 10 Amperes. mains
U.K. & Ireland| 230V tools| 3 Amperes. in plugs
Product Information
Specifications
- Final page size: A5 (148mm x 210mm)
- Models: DCD991, DCD996
- Language: English
- Voltage: 18V
- Battery type: Li-Ion
- Power output: 820W
- No load speed: 1st gear – 55 min-1, 2nd gear – 55 min-1, 3rd gear – 15 min-1
- Impact rate: 1st gear – 15 min-1, 2nd gear – 15 min-1, 3rd gear – 13 min-1
- Max. torque: Hard – 55 Nm, Soft – 55 Nm
- Chuck capacity: 13mm
- Maximum drilling capacity: Wood – 15mm, Metal – 15mm, Masonry – 13mm
- Weight (without battery pack): DCD991 – 1.5kg, DCD996 – 1.6kg
- Noise values (LPA): DCD991 – 75 dB(A), DCD996 – 97 dB(A)
- Sound power level (LWA): DCD991 – 86 dB(A), DCD996 – 108 dB(A)
EC-Declaration of Conformity
Machinery Directive
Drill/Driver/Hammerdrill
DCD991, DCD996
DEWALT declares that these products described under Technical Data are in
compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010, EN60745-2-2:2010.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more
information, please contact DEWALT at the following address or refer to the
back of the manual.
The undersigned is responsible for compilation of the technical file and makes
this declaration on behalf of DEWALT.
Markus Rompel
Director Engineering
DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany
29.02.2016
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
- DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
- WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
- CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
- NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
- Denotes risk of electric shock.
- Denotes risk of fire.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f ) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
-
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
-
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
-
Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
-
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
-
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in unexpected situations. -
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
-
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
-
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
-
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
-
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
-
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
-
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. -
Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
-
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
-
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a risk of injury and fire. -
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Specific Safety Rules for Drills/Drivers/Hammerdrills
- Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles, if supplied with the tool. Loss of control can cause personal injury.
- Hold power tool by insulated gripping surfaces when performing an operation where the cutting tool or the fastener may contact hidden wiring. Cutting accessory or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
- Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
- Wear ear protectors when hammering for extended periods of time. Prolonged exposure to high intensity noise can cause hearing loss. Temporary hearing loss or serious ear drum damage may result from high sound levels generated by hammer drilling.
- Wear safety goggles or other eye protection. Hammering and drilling operations cause chips to fly. Flying particles can cause permanent eye damage.
- Hammer bits and tools get hot during operation. Wear gloves when touching them.
Residual Risks
The following risks are inherent to the use of percussion drills:
-
Injuries caused by touching the rotating parts or hot parts of the tool.
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are: -
Impairment of hearing.
-
Risk of squeezing fingers when changing accessories.
-
Health hazards caused by breathing dust developed when working in wood.
-
Risk of personal injury due to flying particles.
-
Risk of personal injury due to prolonged use.
Electrical Safety
The electric motor has been designed for one voltage only. Always check that
the battery pack voltage corresponds to the voltage on the rating plate. Also
make sure that the voltage of your charger corresponds to that of your mains.
Your DEWALT charger is double insulated in accordance with EN60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the DEWALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
- Safely dispose of the old plug.
- Connect the brown lead to the live terminal in the plug.
- Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended
fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an
approved extension cable suitable for the power input of your charger (see
Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30
m. When using a cable reel, always unwind the cable completely.
SAVE THESE INSTRUCTIONS
Chargers
DEWALT chargers require no adjustment and are designed to be as easy as
possible to operate.
Important Safety Instructions for All Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and
operating instructions for compatible battery chargers (refer to Technical
Data).
- Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.
WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may result.
- We recommend the use of a residual current device with a residual current rating of 30mA or less.
CAUTION: Burn hazard. To reduce the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
- Children should be supervised to ensure that they do not play with the appliance.
NOTICE: Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean
- DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.
- These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
- Do not expose charger to rain or snow.
- Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.
- Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire,electric shock, or electrocution.
- Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
- Do not operate charger with damaged cord or plug—have them replaced immediately.
- Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorised service centre.
- Do not disassemble charger; take it to an authorised service centre when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
- In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard.
- Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
- NEVER attempt to connect two chargers together.
- The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger.
Charging a Battery
- Plug the charger into an appropriate outlet before inserting battery pack.
- Insert the battery pack 8 into the charger, making sure the battery pack is fully seated in the charger. The red (charging) light will blink repeatedly indicating that the charging process has started.
- The completion of charge will be indicated by the red light remaining ON continuously. The battery pack is fully charged and may be used at this time or left in the charger. To remove the battery pack from the charger, push the battery release button 9 on the battery pack.
NOTE: To ensure maximum performance and life of lithium-ion battery packs, charge the battery pack fully before first use.
Charger Operation
Refer to the indicators below for the charge status of the battery pack.
- The red light will continue to blink, but a yellow indicator light will be illuminated during this operation. Once the battery pack has reached an appropriate temperature, the yellow light will turn off and the charger will resume the charging procedure.
The compatible charger(s) will not charge a faulty battery pack. The charger
will indicate faulty battery by refusing to light or by displaying problem
pack or charger blink pattern.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be
tested at an authorized service centre.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until the
battery pack has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures maximum
battery pack life. A cold battery pack will charge at a slower rate than a
warm battery pack. The battery pack will charge at that slower rate throughout
the entire charging cycle and will not return to maximum charge rate even if
the battery pack warms.
The DCB118 charger is equipped with an internal fan designed to cool the
battery pack. The fan will turn on automatically when the battery pack needs
to be cooled. Never operate the charger if the fan does not operate properly
or if ventilation slots are blocked. Do not permit foreign objects to enter
the interior of the charger.
Electronic Protection System
XR Li-Ion tools are designed with an Electronic Protection System that will
protect the battery pack against overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the lithium-ion battery pack on the charger
until it is fully charged.
Wall Mounting
These chargers are designed to be wall mountable or to sit upright on a table
or work surface. If wall mounting, locate the charger within reach of an
electrical outlet, and away from a corner or other obstructions which may
impede air flow. Use the back of the charger as a template for the location of
the mounting screws on the wall. Mount the charger securely using drywall
screws (purchased separately) at least 25.4 mm long with a screw head diameter
of 7–9 mm, screwed into wood to an optimal depth leaving approximately 5.5 mm
of the screw exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in the slots.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger from the AC outlet before
cleaning. Dirt and grease may be removed from the exterior of the charger
using a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions. Never let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Battery Packs
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalog number and
voltage. The battery pack is not fully charged out of the carton. Before using
the battery pack and charger, read the safety instructions below. Then follow
charging procedures outlined.
READ ALL INSTRUCTIONS
- Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.
- Never force battery pack into charger. Do not modify battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury.
- Charge the battery packs only in DEWALT chargers.
- DO NOT splash or immerse in water or other liquids.
- Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal buildings in summer).
- Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs are burned.
- If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
- Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.
-
Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with
a hammer, stepped on). Electric shock or electrocution may result. Damaged battery packs should be returned to service centre for recycling. -
Fire hazard. Do not store or carry the battery pack so that metal objects can contact exposed battery terminals. For example, do not place the battery pack in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over.
Transportation
WARNING: Fire hazard. Transporting batteries can possibly cause fire if the
battery terminals inadvertently come in contact with conductive materials.
When transporting batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them and cause
a short circuit.
DEWALT batteries comply with all applicable shipping regulations as prescribed
by industry and legal standards which include UN Recommendations on the
Transport of Dangerous Goods; International Air Transport Association (IATA)
Dangerous Goods Regulations, International Maritime Dangerous Goods (IMDG)
Regulations, and the European Agreement Concerning The International Carriage
of Dangerous Goods by Road (ADR). Lithium-ion cells and batteries have been
tested to section 38.3 of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests and Criteria. In most instances, shipping a DEWALT
battery pack will be excepted from being classified as a fully regulated Class
9 Hazardous Material. In general, only shipments containing a lithium-ion
battery with an energy rating greater than 100 Watt Hours (Wh) will require
being shipped as fully regulated Class 9. All lithium-ion batteries have the
Watt Hour rating marked on the pack. Furthermore, due to regulation
complexities, DEWALT does not recommend air shipping lithium-ion battery packs
alone regardless of Watt Hour rating. Shipments of tools with batteries (combo
kits) can be air shipped as excepted if the Watt Hour rating of the battery
pack is no greater than 100 Whr. Regardless of whether a shipment is
considered excepted or fully regulated, it is the shipper’s responsibility to
consult the latest regulations for packaging, labeling/marking and
documentation requirements. The information provided in this section of the
manual is provided in good faith and believed to be accurate at the time the
document was created. However, no warranty, expressed or implied, is given. It
is the buyer’s responsibility to ensure that its activities comply with the
applicable regulations.
Transporting the FLEXVOLTTM Battery
The DEWALT FLEXVOLTTM battery has two modes: Use and Transport.
Use Mode: When the FLEXVOLTTM battery stands alone or is in a DEWALT 18V
product, it will operate as an 18V battery. When the FLEXVOLTTM battery is in
a 54V or a 108V (two 54V batteries) product, it will operate as a 54V battery.
Transport Mode: When the cap is attached to the FLEXVOLTTM battery, the
battery is in Transport mode. Keep the cap for shipping.
When in Transport mode, strings of cells are electrically disconnected within the pack resulting in 3 batteries with a lower Watt hour (Wh) rating as compared to 1 battery with a higher Watt hour rating. This increased quantity of 3 batteries with the lower Watt hour rating can exempt the pack from certain shipping regulations that are imposed upon the higher Watt hour batteries.
For example, the Transport Example of Use and Transport Label Marking Wh
rating might indicate 3 x 36 Wh, meaning 3 batteries of 36 Wh each.
The Use Wh rating might indicate 108 Wh (1 battery implied).
Storage Recommendations
- The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. For optimum battery performance and life, store battery packs at room temperature when not in use.
- For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger and the battery pack may show the following pictographs:
- Read instruction manual before use.
- See Technical Data for charging time.
- Do not probe with conductive objects.
- Do not charge damaged battery packs.
- Do not expose to water.
- Have defective cords replaced immediately.
- Charge only between 4 ˚C and 40 ˚C.
- Only for indoor use.
- Discard the battery pack with due care for the environment.
- Charge DeWALT battery packs only with designated DeWALT chargers. Charging battery packs other than the designated DeWALT batteries with a DeWALT charger may make them burst or lead to other dangerous situations.
- Do not incinerate the battery pack.
- USE (without transport cap). Example: Wh rating indicates 108 Wh (1 battery with 108 Wh).
- TRANSPORT (with built-in transport cap). Example: Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCD991 and DCD996 operate on a 18V Li-Ion XR and XR FLEXVOLTTM battery
packs These battery packs may be used: DCB181, DCB182, DCB183, DCB183B,
DCB184, DCB184B, DCB185, DCB546. Refer to Technical Data for more information.
Package Contents
The package contains:
- 1 Brushless cordless drill/driver (DCD991)
- 1 Brushless cordless hammerdrill (DCD996)
- 1 Li-Ion battery packs (M1, P1, T1)
- 2 Li-Ion battery packs (M2, P2, T2)
- 3 Li-Ion battery packs (M3, P3, T3)
- 1 Tool Connect™ App instruction manual
- 1 Kitbox
- 1 Charger
- 1 Side handle
- 1 Instruction manual
NOTE: Battery packs, chargers and kitboxes are not included with N-models. Battery packs and chargers are not included with NT models. B models include Bluetooth® battery packs.
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®, SIG, Inc. and any use of such marks by DEWALT is under license. Other trademarks and trade names are those of their respective owners.
- Check for damage to the tool, parts or accessories which may have occurred during transport.
- Take the time to thoroughly read and understand this manual prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
- Read instruction manual before use.
Date Code Position
The date code, which also includes the year of manufacture, is printed into
the housing.
Example:
2016 XX XX
Year of Manufacture
Description
WARNING: Never modify the power tool or any part of it. Damage or
personal injury could result.
- Trigger switch
- Forward/reverse control button
- Work light
- Chuck
- Torque adjustment collar
- Gear shifter
- Side handle
- Battery pack
- Battery release button
- Belt hook
- Mounting screw
- Magnetic bit holder
- Work light switch
- Low work light mode
- Medium work light mode
- Spotlight mode
- Fuel gauge
- Main handle
Intended Use
These drills drivers/hammer drills are designed for professional drilling,
percussion drilling and screw driving applications. This tool is compatible
with Bluetooth® Battery Technology and with the DEWALT Tool Connect™ App.
Please see your Tool Connect™ App instruction manual for more information. DO
NOT use under wet conditions or in the presence of flammable liquids or gases.
These drills/drivers/hammer drills are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
- Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
- This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.
Product Usage Instructions
Safety Precautions
Before using the DEWALT cordless drill/driver, please read and understand
all safety precautions mentioned in the user manual.
Some important safety precautions include:
- Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.
- Ensure the work area is well-lit and free from any hazards.
- Do not use the drill/driver if it is damaged or if any parts are missing.
- Keep children and bystanders away from the work area.
Assembly
Before using the drill/driver, follow these steps for assembly:
- Insert the battery pack into the designated slot on the tool until it clicks into place.
- Make sure the chuck is fully closed by rotating it clockwise.
- If necessary, attach any accessories or drill bits to the chuck by inserting them and tightening the chuck clockwise.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
- Use only DEWALT battery packs and chargers.
Inserting and Removing the Battery Pack from the Tool
NOTE: Make sure your battery pack 8 is fully charged.
To Install the Battery Pack into the Tool Handle
- Align the battery pack 8 with the rails inside the tool’s handle (Fig. B).
- Slide it into the handle until the battery pack is firmly seated in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
- Press the release button 9 and firmly pull the battery pack out of the tool handle.
- Insert battery pack into the charger as described in the charger section of this manual.
Fuel Gauge Battery Packs
Some DEWALT battery packs include a fuel gauge which consists of three green
LED lights that indicate the level of charge remaining in the battery pack. To
actuate the fuel gauge, press and hold the fuel gauge button 17 . A
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged.
NOTE: The fuel gauge is only an indication of the charge left on the
battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end-user application.
Variable Speed Switch
To turn the tool on, squeeze the trigger switch 1 . To turn the tool off,
release the trigger switch. Your tool is equipped with a brake. The chuck will
stop as soon as the trigger switch is fully released.
NOTE: Continuous use in variable speed range is not recommended. It may
damage the switch and should be avoided.
Side Handle
WARNING: To reduce the risk of personal injury, ALWAYS operate the tool
with the side handle properly installed. Failure to do so may result in the
side handle slipping during tool operation and subsequent loss of control.
Hold tool with both hands to maximize control.
The side handle 7 clamps to the front of the gear case and may be rotated
360˚ to permit right- or left-hand use. Side handle must be tightened
sufficiently to resist the twisting action of the tool if the accessory binds
or stalls. Be sure to grip the side handle at the far end to control the tool
during a stall. If model is not equipped with side handle, grip drill with one
hand on the handle and one hand on the battery pack.
NOTE: Side handle comes equipped on all models.
Forward/Reverse Control Button
A forward/reverse control button 2 determines the direction of the tool and
also serves as a lock off button. To select forward rotation, release the
trigger switch and depress the for ward/re verse control button on the right
side of the tool. To select reverse, release the trigger switch and depress
the forward/reverse control button on the left side of the tool. The center
position of the control button locks the tool in the off position. When
changing the position of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing the direction of
rotation, you may hear a click on start up. This is normal and does not
indicate a problem.
Torque Adjustment Collar/Electronic Clutch
Your tool has an electronic adjustable torque screwdriver mechanism for driving and removing a wide array of fasteners. Circling the torque adjustment collar 5 are numbers. These numbers are used to set the clutch to deliver a torque range. The higher the number on the collar, the higher the torque and the larger the fastener which can be driven. To select any of the numbers, rotate until the desired number aligns with the arrow.
Three-Speed Gearing
The three-speed feature of your tool allows you to shift gears for greater
versatility. To select speed 1 (highest torque setting), turn the tool off and
permit it to stop. Slide the gear shifter 6 all the way forward. Speed 2
(middle torque and speed setting) is in the middle position. Speed 3 (highest
speed setting) is to the rear.
NOTE: Do not change gears when the tool is running. Always allow the
drill to come to a complete stop before changing gears. If you have trouble
changing gears, make sure that the gear shifter is engaged in one of the three
speed settings.
If the speed shifter becomes stuck or is difficult to select the desired gear,
pull the trigger switch 1 to rotate the motor. Then select the gear.
Keyless Single Sleeve Chuck
WARNING: Do not attempt to tighten drill bits (or any other accessory) by gripping the front part of the chuck and turning the tool on. Damage to the chuck and personal injury may result. Always lock off trigger switch and disconnect tool from power source when changing acces sories.
- Always ensure the bit is secure before starting the tool. A loose bit may eject from tool causing possible personal injury.
Your tool features a keyless chuck with one rotating sleeve for one-handed operation of the chuck. To insert a drill bit or other accessory, follow these steps.
- Turn off tool and disconnect tool from power source.
- Grasp the black sleeve of the chuck 4 with one hand and use the other hand to secure the tool as shown in Figure F. Rotate the sleeve counterclockwise (as viewed from the front) far enough to accept the desired accessory.
- Insert the accessory about 19 mm into the chuck (Fig. G). Tighten securely by rotating the chuck sleeve clockwise with one hand while holding the tool with the other hand (Fig. H). Continue to rotate the chuck sleeve until several ratchet clicks are heard to ensure full gripping power.
To release the accessory, repeat Steps 1 and 2 above. Be sure to tighten chuck with one hand on the chuck sleeve and one hand holding the tool for maximum tightness.
LED Work light
The LED work light 3 and its work light switch 13 are located on the foot
of the tool. The work light is activated when the trigger switch is depressed.
The low 14 , medium 15 and spotlight 16 modes can be changed by moving
the switch on the foot of the tool. If the trigger switch remains depressed,
the work light will remain on in all modes. When on low 14 and medium 15
settings, the beam will automatically turn off 20 seconds after the trigger
switch is released.
Spotlight Mode
The high setting 16 is the spotlight mode. The spotlight will run for 20
minutes after the trigger switch is released. Two minutes before the spotlight
will shut off, it will flash twice and then dim. To avoid the spotlight
shutting off, lightly tap the trigger switch.
WARNING: While using the work light in medium or spotlight mode, do not
stare at the light or place the drill in a position which may cause anyone to
stare into the light. Serious eye injury could result.
CAUTION: When using the tool as a spotlight, be sure it is secured on a
stable surface where it will not cause a tripping or falling hazard.
- Remove all accessories from the chuck before using the drill as a spotlight. Personal injury or property damage could result.
Low Battery Warning
When in spotlight mode and the battery is nearing complete discharge, the
spotlight will flash twice and then dim. After two minutes, the battery will
be completely discharged and the drill will immediately shut down. At this
point, replace with a charged battery.
WARNING: To reduce the risk of injury, always have a back-up battery or
secondary lighting available if the situation warrants it.
Belt Hook and Magnetic Bit Holder
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories.
- To reduce the risk of serious personal injury, DO NOT suspend tool overhead or suspend objects from the belt hook. ONLY hang tool’s belt hook from a work belt.
- To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure.
CAUTION: To reduce the risk of personal injury or damage, DO NOT use the
belt hook to hang the drill while using as a spotlight.
IMPORTANT: When attaching or replacing the belt hook or magnetic bit
holder, use only the screw 11 that is provided. Be sure to securely tighten
the screw.
The belt hook 10 and magnetic bit holder 12 can be be attached to either
side of the tool using only the screw 11 provided, to accommodate left- or
right- handed users. If the hook or magnetic bit holder is not desired at all,
it can be removed from the tool.
To move belt hook or magnetic bit holder, remove the screw 11 that holds it
in place then reassemble on the opposite side. Be sure to securely tighten the
screw.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and applicable
regulations.
- To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
Proper Hand Position
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown in figure I.
- To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle 18 , with the other hand on the side handle 7 .
Drill Operation
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect tool from power source before making any adjustments or
removing/installing attachments or accessories. TO REDUCE THE RISK OF PERSONAL
INJURY, ALWAYS ensure workpiece is anchored or clamped firmly. If drilling
thin material, use a wood “back-up” block to prevent damage to the material.
- Select the desired speed/torque range using the gear shifter to match the speed and torque to the planned operation. Set the torque adjustment collar 5 to the drill symbol.
- For Wood, use twist bits, spade bits, power auger bits or hole saws. For Metal, use high-speed steel twist drill bits or hole saws. Use a cutting lubricant when drilling metals. The exceptions are cast iron and brass which should be drilled dry.
- Always apply pressure in a straight line with the bit. Use enough pressure to keep the drill bit biting, but do not push hard enough to stall the motor or deflect the bit.
- Hold tool firmly with both hands to control the twisting action of the drill.
- IF DRILL STALLS, it is usually because it is being overloaded. RELEASE TRIGGER IMMEDIATELY, remove drill bit from work, and determine cause of stalling. DO NOT CLICK TRIGGER OFF AND ON IN AN ATTEMPT TO START A STALLED DRILL – THIS CAN DAMAGE THE DRILL.
- Keep the motor running when pulling the bit back out of a drilled hole. This will help prevent jamming.
Screwdriver Operation
-
Select the desired speed/torque range using the three-speed gear shifter 6 on the top of the tool. If using the torque adjustment collar 5 , initially set the three-speed gear shifter to speed 2 or 3. This ensures effective control over the fastener allowing the screw to be seated correctly and set to specification. Speed 1 will provide the same clutching torque as speeds 2 and 3. However, for optimum performance of the electronic clutch, speeds 2 and 3
are preferred.
NOTE: Use the lowest torque setting (1) first and increase the number through to the highest setting (11) to seat the fastener at the desired depth. The lower the number, the lower the torque output. -
Reset the torque adjustment collar 5 to the appropriate number setting for the torque desired. Make a few practice runs in scrap or unseen areas to determine the proper position of the torque adjustment collar.
NOTE: The torque adjustment collar may be set to any number at any time.
Hammerdrill Operation
- Select the desired speed/torque range using the gear shifter to match the speed and torque to the planned operation. Set the torque adjustment collar 5 to the hammer symbol.
- Select the high speed 3 setting by sliding the gear shifter 6 back (away form the chuck).
- When drilling, use just enough force on the hammer to keep it from bouncing excessively. Prolonged and too much force on the hammer will cause slower drilling speeds and potential overheating.
- Drill straight, keeping the bit at a right angle to the work. Do not exert side pressure on the bit when drilling as this will cause clogging of the bit flutes and a slower drilling speed.
- When drilling deep holes, if the hammer speed starts to drop off, pull the bit partially out of the hole with the tool still running to help clear debris from the hole.
- For masonry, use carbide-tipped bits or masonry bits. A smooth, even flow of dust indicates the proper drilling rate.
MAINTENANCE
Your DEWALT power tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
The charger and battery pack are not serviceable.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air as often
as dirt is seen collecting in and around the air vents. Wear approved eye
protection and approved dust mask when performing this procedure.
- Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
Optional Accessories
WARNING: Since accessories, other than those offered by DEWALT, have not
been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DEWALT recommended accessories
should be used with this product.
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked with this symbol must not
be disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products and
batteries according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce
sufficient power on jobs which were easily done before. At the end of its
technical life, discard it with due care for our environment:
- Run the battery pack down completely, then remove it from the tool.
- Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or disposed of properly.
United Kingdom DEWALT, 210 Bath Road; Slough, Berks SL1 3YD
Tel: 01753-567055
Fax: 01753-572112
Website: www.dewalt.co.uk
Email: emeaservice@sbdinc.com
Operating Modes
The DEWALT cordless drill/driver has multiple operating modes:
- Drill Mode: Use this mode for general drilling tasks in wood, metal, or masonry.
- Driver Mode: Use this mode for driving screws or fasteners into various materials.
- Hammer drill Mode (DCD996 only): Use this mode for drilling into tough materials like concrete or brick.
Selecting Speed and Torque
The drill/driver offers three gear speeds and adjustable torque
settings:
- For high-speed drilling tasks, select the 3rd gear.
- For medium-speed drilling or driving tasks, select the 2nd gear.
- For low-speed drilling or driving tasks, select the 1st gear.
- Adjust the torque setting based on the hardness of the material and the desired tightness of the fastener.
Drilling Process
Follow these steps for drilling with the DEWALT cordless
drill/driver:
- Select the appropriate drill bit for the material you are drilling into.
- Position the drill bit on the desired drilling spot and apply steady pressure.
- Start the drill by squeezing the trigger gradually.
- Maintain a steady grip on the tool and avoid excessive force or pressure.
- Once the desired depth is reached, release the trigger to stop the drilling process.
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER DCF887
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product
development and innovation make DEWALT one of the most reliable partners for
professional power tool users.
Technical Data
| | DCF887
---|---|---
Voltage| VDC| 18
Type| | 1/10/20
Battery type| | Li-Ion
Power output| W| 400
No load speed| rpm|
Mode 1| | 0–1000
Mode 2| | 0–2800
Mode 3| | 0–3250
Impact rate| ipm| 0–3800
Max torque| Nm| 205
Tool holder| mm| 6.35
Weight (without battery pack)| kg| 0.9
| |
Noise values and vibration values (triax vector sum) according to EN60745-2-2:
LPA (emission sound pressure level)| dB(A)| 96
LWA (sound power level)| dB(A)| 107
K (uncertainty for the given sound level)| dB(A)| 3
| |
Vibration emission value ah =| m/s2| 22.0
Uncertainty K =| m/s2| 2.1
The vibration emission level given in this information sheet has been measured
in accordance with a standardized test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure.
WARNING: The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
EC-Declaration of Conformity
Machinery Directive
Brushless Cordless Compact Impact Driver DCF887
DEWALT declares that these products described under Technical Data are in
compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-2:2010. These products also
comply with Directive 2014/30/EU and 2011/65/EU. For more information, please
contact DEWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes
this declaration on behalf of DEWALT.
Markus Rompel
Director Engineering
DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany 31.05.2017
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
- DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
- WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
- CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
- NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
- Denotes risk of electric shock.
- Denotes risk of fire.
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
Batteries | Chargers/Charge Times (Minutes) |
---|
Weight
Cat # VDC Ah kg|
DCB107 DCB113 DCB115 DCB118 DCB132 DCB119
DCB546| 18/54| 6.0/2.0| 1.05| 270| 140| 90| 60| 90| X
DCB547| 18/54| 9.0/3.0| 1.25| 420| 220| 140| 85| 140| X
DCB181| 18| 1.5| 0.35| 70| 35| 22| 22| 22| 45
DCB182| 18| 4.0| 0.61| 185| 100| 60| 60| 60| 120
DCB183/B| 18| 2.0| 0.40| 90| 50| 30| 30| 30| 60
DCB184/B| 18| 5.0| 0.62| 240| 120| 75| 75| 75| 150
DCB185| 18| 1.3| 0.35| 60| 30| 22| 22| 22| X
DCB187| 18| 3.0| 0.48| 140| 70| 45| 45| 45| 90
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
-
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
-
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
-
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock. -
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
-
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
-
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
-
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
-
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
-
Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
-
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
-
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in unexpected situations. -
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
-
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
-
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
-
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
-
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
-
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
-
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
-
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. -
Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
-
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
-
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a risk of injury and fire. -
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Additional Specific Safety Rules for Impact Wrenches/Drivers
- Hold power tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Residual Risks
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be avoided.
These are:
- Impairment of hearing.
- Risk of personal injury due to flying particles.
- Risk of burns due to accessories becoming hot during operation.
- Risk of personal injury due to prolonged use.
Electrical Safety
The electric motor has been designed for one voltage only. Always check that
the battery pack voltage corresponds to the voltage on the rating plate. Also
make sure that the voltage of your charger corresponds to that of your mains.
Your DEWALT charger is double insulated in accordance with EN60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced by a specially prepared
cord available through the DEWALT service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
- Safely dispose of the old plug.
- Connect the brown lead to the live terminal in the plug.
- Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended
fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an
approved extension cable suitable for the power input of your charger (see
Technical Data). The minimum conductor size is 1 mm2; the maximum length is 30
m. When using a cable reel, always unwind the cable completely.
SAVE THESE INSTRUCTIONS
Chargers
DEWALT chargers require no adjustment and are designed to be as easy as
possible to operate.
Important Safety Instructions for All Battery Chargers
SAVE THESE INSTRUCTIONS: This manual contains important safety and operating instructions for compatible battery chargers (refer to Technical Data).
- Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using battery pack.
WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric shock may result.
- We recommend the use of a residual current device with a residual current rating of 30mA or less.
CAUTION: Burn hazard. To reduce the risk of injury, charge only DEWALT rechargeable batteries. Other types of batteries may burst causing personal injury and damage.
- Children should be supervised to ensure that they do not play with the appliance.
NOTICE: Under certain conditions, with the charger plugged into the power supply, the exposed charging contacts inside the charger can be shorted by foreign material. Foreign materials of a conductive nature such as, but not limited to, steel wool, aluminum foil or any buildup of metallic particles should be kept away from charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug charger before attempting to clean
- DO NOT attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.
- These chargers are not intended for any uses other than charging DEWALT rechargeable batteries. Any other uses may result in risk of fire, electric shock or electrocution.
- Do not expose charger to rain or snow.
- Pull by plug rather than cord when disconnecting charger. This will reduce risk of damage to electric plug and cord.
- Make sure that cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
- Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock, or electrocution.
- Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
- Do not operate charger with damaged cord or plug—have them replaced immediately.
- Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service centre.
- Do not disassemble charger; take it to an authorized service centre when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
- In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard.
- Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.
- NEVER attempt to connect two chargers together.
- The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger.
Charging a Battery
- Plug the charger into an appropriate outlet before inserting battery pack.
- Insert the battery pack 6 into the charger, making sure the battery pack is fully seated in the charger. The red (charging) light will blink repeatedly indicating that the charging process has started.
- The completion of charge will be indicated by the red light remaining ON continuously. The battery pack is fully charged and may be used at this time or left in the charger. To remove the battery pack from the charger, push the battery release button 5 on the battery pack.
NOTE: To ensure maximum performance and life of lithium-ion battery packs, charge the battery pack fully before first use.
Charger Operation
Refer to the indicators below for the charge status of the battery pack.
- The red light will continue to blink, but a yellow indicator light will be illuminated during this operation. Once the battery pack has reached an appropriate temperature, the yellow light will turn off and the charger will resume the charging procedure.
The compatible charger(s) will not charge a faulty battery pack. The charger
will indicate faulty battery by refusing to light or by displaying problem
pack or charger blink pattern.
NOTE: This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to be
tested at an authorized service centre.
Hot/Cold Pack Delay
When the charger detects a battery pack that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until the
battery pack has reached an appropriate temperature. The charger then
automatically switches to the pack charging mode. This feature ensures maximum
battery pack life.A cold battery pack will charge at a slower rate than a warm
battery pack. The battery pack will charge at that slower rate throughout the
entire charging cycle and will not return to maximum charge rate even if the
battery pack warms. The DCB118 charger is equipped with an internal fan
designed to cool the battery pack. The fan will turn on automatically when the
battery pack needs to be cooled. Never operate the charger if the fan does not
operate properly or if ventilation slots are blocked. Do not permit foreign
objects to enter the interior of the charger.
Electronic Protection System
XR Li-Ion tools are designed with an Electronic Protection System that will
protect the battery pack against overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic Protection System
engages. If this occurs, place the lithium-ion battery pack on the charger
until it is fully charged.
Wall Mounting
These chargers are designed to be wall mountable or to sit upright on a table
or work surface. If wall mounting, locate the charger within reach of an
electrical outlet, and away from a corner or other obstructions which may
impede air flow. Use the back of the charger as a template for the location of
the mounting screws on the wall. Mount the charger securely using drywall
screws (purchased separately) at least 25.4 mm long with a screw head diameter
of 7–9 mm, screwed into wood to an optimal depth leaving approximately 5.5 mm
of the screw exposed. Align the slots on the back of the charger with the
exposed screws and fully engage them in the slots.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger from the AC outlet before
cleaning. Dirt and grease may be removed from the exterior of the charger
using a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions. Never let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Battery Packs
Important Safety Instructions for All Battery Packs
When ordering replacement battery packs, be sure to include catalogue number
and voltage. The battery pack is not fully charged out of the carton. Before
using the battery pack and charger, read the safety instructions below. Then
follow charging procedures outlined.
READ ALL INSTRUCTIONS
- Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.
- Never force battery pack into charger. Do not modify battery pack in any way to fit into a non-compatible charger as battery pack may rupture causing serious personal injury.
- Charge the battery packs only in DEWALT chargers.
- DO NOT splash or immerse in water or other liquids.
- Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal buildings in summer).
- Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs are burned.
- If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
- Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.
- Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Electric shock or electrocution may result. Damaged battery packs should be returned to service centre for recycling.
- Fire hazard. Do not store or carry the battery pack so that metal objects can contact exposed battery terminals. For example, do not place the battery pack in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc.
CAUTION: When not in use, place tool on its side on a stable surface where it will not cause a tripping or falling hazard. Some tools with large battery packs will stand upright on the battery pack but may be easily knocked over.
Transportation
WARNING: Fire hazard. Transporting batteries can possibly cause fire if the
battery terminals inadvertently come in contact with conductive materials.
When transporting batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them and cause
a short circuit.
DEWALT batteries comply with all applicable shipping regulations as prescribed
by industry and legal standards which include UN Recommendations on the
Transport of Dangerous Goods; International Air Transport Association (IATA)
Dangerous Goods Regulations, International Maritime Dangerous Goods (IMDG)
Regulations, and the European Agreement Concerning The International Carriage
of Dangerous Goods by Road (ADR). Lithium-ion cells and batteries have been
tested to section 38.3 of the UN Recommendations on the Transport of Dangerous
Goods Manual of Tests and Criteria. In most instances, shipping a DEWALT
battery pack will be excepted from being classified as a fully regulated Class
9 Hazardous Material. In general, only shipments containing a lithium-ion
battery with an energy rating greater than 100 Watt Hours (Wh) will require
being shipped as fully regulated Class 9. All lithium-ion batteries have the
Watt Hour rating marked on the pack. Furthermore, due to regulation
complexities, DEWALT does not recommend air shipping lithium-ion battery packs
alone regardless of Watt Hour rating. Shipments of tools with batteries (combo
kits) can be air shipped as excepted if the Watt Hour rating of the battery
pack is no greater than 100 Whr. Regardless of whether a shipment is
considered excepted or fully regulated, it is the shipper’s responsibility to
consult the latest regulations for packaging, labeling/marking and
documentation requirements. The information provided in this section of the
manual is provided in good faith and believed to be accurate at the time the
document was created. However, no warranty, expressed or implied, is given. It
is the buyer’s responsibility to ensure that its activities comply with the
applicable regulations.
Transporting the FLEXVOLTTM Battery
The DEWALT FLEXVOLTTM battery has two modes: Use and Transport.
Use Mode: When the FLEXVOLTTM battery stands alone or is in a DEWALT 18V
product, it will operate as an 18V battery. When the FLEXVOLTTM battery is in
a 54V or a 108V (two 54V batteries) product, it will operate as a 54V battery.
Transport Mode: When the cap is attached to the FLEXVOLTTM battery, the
battery is in Transport mode. Keep the cap for shipping.
When in Transport mode, strings of cells are electrically disconnected within
the pack resulting in 3 batteries with a lower Watt hour (Wh) rating as
compared to 1 battery with a higher Watt hour rating. This increased quantity
of 3 batteries with the lower Watt hour rating can exempt the pack from
certain shipping regulations that are imposed upon the higher Watt hour
batteries.
For example, the Transport Example of Use and Transport Label Marking Wh
rating might indicate 3 x 36 Wh, meaning 3 batteries of 36 Wh each. The Use Wh
rating might indicate 108 Wh (1 battery implied).
Storage Recommendations
- The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. For optimum battery performance and life, store battery packs at room temperature when not in use.
- For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for optimal results.
NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels on the charger
and the battery pack may show the following pictographs:
- Read instruction manual before use.
- See Technical Data for charging time.
- Do not probe with conductive objects.
- Do not charge damaged battery packs.
- Do not expose to water.
- Have defective cords replaced immediately.
- Charge only between 4 ˚C and 40 ˚C.
- Only for indoor use.
- Discard the battery pack with due care for the environment.
- Charge DeWALT battery packs only with designated DeWALT chargers. Charging battery packs other than the designated DeWALT batteries with a DeWALT charger may make them burst or lead to other dangerous situations.
- Do not incinerate the battery pack.
- USE (without transport cap). Example: Wh rating indicates 108 Wh (1 battery with 108 Wh).
- TRANSPORT (with built-in transport cap). Example: Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).
Battery Type
The DCF887 operates on an 18 volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183, DCB183B, DCB184,
DCB184B, DCB185, DCB187, DCB546, DCB547. Refer to Technical Data for more
information.
Package Contents
The package contains
- 1 Impact driver
- 1 Charger
- 1 Li-Ion battery pack (M1, L1, C1, P1, D1, D1B models)
- 2 Li-Ion battery packs (M2, L2, C2, P2, D2, D2B models)
- 3 Li-Ion battery packs (M3, L3, C3, P3, D3, D3B models)
- 1 Magnetic bit holder
- 1 Belt hook
- 1 Kitbox
- 1 Instruction manual
- 1 Tool ConnectTM App instruction manual (B models)
NOTE: Battery packs, chargers and kitboxes are not included with N-models.
- Check for damage to the tool, parts or accessories which may have occurred during transport.
- Take the time to thoroughly read and understand this manual prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
- Read instruction manual before use.
- Visible radiation. Do not stare into light.
Date Code Position
The date code, which also includes the year of manufacture, is printed into
the housing.
Example: 2017 XX XX Year of Manufacture
Description
WARNING: Never modify the power tool or any part of it. Damage or personal injury could result.
- Trigger switch
- Forward/reverse control button
- Chuck collar
- 6.35 mm hex chuck
- Battery release button
- Battery pack
- Work lights
- Belt hook (optional accessory)
- Mounting screw
- Main handle
- Mode selector
- Magnetic bit holder
Intended Use
This impact driver is designed for professional impact screw driving
applications. The impact function makes this tool particularly useful for
driving fasteners in wood, metal and concrete. DO NOT use under wet conditions
or in the presence of flammable liquids or gases. This impact driver is a
professional power tool. DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.
- Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
- This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
- Use only DEWALT battery packs and chargers.
Inserting and Removing the Battery Pack from the Tool
NOTE: Make sure your battery pack 6 is fully charged.
To Install the Battery Pack into the Tool Handle
- Align the battery pack 6 with the rails inside the tool’s handle (Fig. B).
- Slide it into the handle until the battery pack is firmly seated in the tool and ensure that you hear the lock snap into place.
To Remove the Battery Pack from the Tool
- Press the release button 5 and firmly pull the battery pack out of the tool handle.
- Insert battery pack into the charger as described in the charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some DEWALT battery packs include a fuel gauge which consists of three green
LED lights that indicate the level of charge remaining in the battery pack. To
actuate the fuel gauge, press and hold the fuel gauge button 13 . A
combination of the three green LED lights will illuminate designating the
level of charge left. When the level of charge in the battery is below the
usable limit, the fuel gauge will not illuminate and the battery will need to
be recharged. NOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is subject to
variation based on product components, temperature and end-user application.
Belt Hook and Magnetic Bit Holder (Fig. A)
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories.
- To reduce the risk of serious personal injury, DO NOT suspend tool overhead or suspend objects from the belt hook. ONLY hang tool’s belt hook from a work belt.
- To reduce the risk of serious personal injury, ensure the screw holding the belt hook is secure.
IMPORTANT: When attaching or replacing the belt hook or magnetic bit
holder, use only the screw 9 that is provided. Be sure to securely tighten
the screw.
The belt hook 8 and magnetic bit holder 12 can be attached to either side
of the tool using only the screw 9 provided,to accommodate left- or right-
handed users. If the hook or magnetic bit holder is not desired at all, it can
be removed from the tool. To move belt hook or magnetic bit holder, remove the
screw 9 that holds it in place then reassemble on the opposite side. Be sure
to securely tighten the screw.
OPERATION
Instructions for Use
WARNING: Always observe the safety instructions and applicable
regulations.
- To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.
Proper Hand Position
WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.
- To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the main handle 10 .
Variable Speed Trigger Switch (Fig. A)
To turn the tool on, squeeze the trigger switch 1 . To turn the tool off,
release the trigger switch. Your tool is equipped with a brake. The tool will
stop when the trigger switch is fully released. The variable speed switch
enables you to start the application at a slow speed. The further you squeeze
the trigger, the faster the tool will operate. For maximum tool life, use
variable speed only for starting holes or fasteners.
NOTE: Continuous use in variable speed range is not recommended. It may
damage the switch and should be avoided.
Forward/Reverse Control Button (Fig. A)
A forward/reverse control button 2 determines the direction of the tool and
also serves as a lock-off button. To select forward rotation, release the
trigger switch 1 and depress the forward/reverse control button 2 on the
right side of the tool. To select reverse, release the trigger switch 1 and
depress the forward/reverse control button 2 on the left side of the tool.
The centre position of the control button locks the trigger switch in the off
position. When changing the position of the control button, be sure the
trigger is released.
NOTE: The first time the tool is run after changing the direction of
rotation, you may hear a click on start up. This is normal and does not
indicate a problem.
Work lights (Fig. A)
There are three work lights 7 located around the 6.35 mm hex chuck 4 . The
work lights are activated when the trigger switch is depressed. When the
trigger is released, the work light will stay illuminated for up to 20
seconds.
NOTE: The work lights are for lighting the immediate work surface and are
not intended to be used as a flashlight.
Mode Selector (Fig. A, D)
Your tool is equipped with a mode selector 11 which allows you to select one
of three modes. Select the mode based on the application and control the speed
of the tool using the variable speed trigger switch 1 .
Precision Drive
In addition to normal impacting modes, this tool features the Precision Drive
mode which enables greater control in lighter applications to avoid damage to
materials or fasteners. It is ideal for light applications such as cabinet
hinge screws or machine screws. Precision Drive mode will work as a
screwdriver in light applications, before hesitating as the screw head reaches
the work piece, and then (if required) start a slow controlled impact to
ensure the head ends perfectly flush.
NOTE: This mode is for light duty screw driving applications. If the tool
will not drive a fastener in Precision Mode, please select mode 2 which will
give the additional power required.
DCF887
Mode 1 Precision Drive rpm 0–1000
Mode 2 Normal Impacting rpm 0–2800
Mode 3 High Speed Impacting rpm 0–3250
Quick-Release Chuck
WARNING: Use only impact accessories. Non-impact accessories may break
and cause a hazardous condition. Inspect accessory prior to use to ensure that
it con tains no cracks.
NOTE: The chuck accepts 6.35 mm hex accessories only. Place the
forward/reverse button 2 in the lock-off (centre) position or remove battery
pack before changing accessories.
To install an accessory, fully insert the accessory. The accessory is locked
into place (Fig. E).
To remove an accessory, pull the chuck collar 3 away from the front of the
tool. Remove the accessory (Fig. F).
Usage
Your impact tool generates the following maximum torque:
Cat # Nm
DCF887 205
CAUTION: Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may cause breakage and possible personal injury.
- Place the accessory into the chuck. Keep the tool pointed straight at the work piece.
- Press switch to start operation. Release the switch to stop operation. Always check torque with a torque wrench, as the fastening torque is affected by many factors including the following:
- Voltage: Low voltage, due to a nearly discharged battery, will reduce fastening torque.
- Socket size: Failure to use the correct socket size will cause a reduction in fastening torque.
- Bolt Size: Larger bolt diameters generally require higher fastening torque. Fastening torque will also vary according to length, grade, and torque coefficient.
- Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque.
- Material: The type of material and surface finish of the material will affect fastening torque.
- Fastening Time: Longer fastening time results in increased fastening torque. Using a longer fastening time than recommended could cause the fasteners to be overstressed, stripped or damaged.
MAINTENANCE
Your DEWALT power tool has been designed to operate over a long period of time
with a minimum of maintenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
The charger and battery pack are not serviceable.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air as often
as dirt is seen collecting in and around the air vents. Wear approved eye
protection and approved dust mask when performing this procedure.
- Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
Charger Cleaning Instructions
WARNING: Shock hazard. Disconnect the charger from the AC outlet before
cleaning. Dirt and grease may be removed from the exterior of the charger
using a cloth or soft non-metallic brush. Do not use water or any cleaning
solutions.
Optional Accessories
WARNING: Since accessories, other than those offered by DEWALT, have not
been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only DEWALT recommended accessories
should be used with this product.
Consult your dealer for further information on the appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked with this symbol must not
be disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled
reducing the demand for raw materials. Please recycle electrical products and
batteries according to local provisions. Further information is available at
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce
sufficient power on jobs which were easily done before. At the end of its
technical life, discard it with due care for our environment:
- Run the battery pack down completely, then remove it from the tool.
- Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or disposed of properly.
United Kingdom
DEWALT, 210 Bath Road; Slough, Berks SL1 3YD
Tel: 01753-567055
Fax: 01753-572112
Website: www.dewalt.co.uk
Email: emeaservice@sbdinc.com
Frequently Asked Questions (FAQ)
-
Q: Can I use the DEWALT cordless drill/driver on concrete?
A: Yes, the DCD996 model has a hammer drill mode specifically designed for drilling into tough materials like concrete or brick. However, ensure you use appropriate masonry drill bits and follow proper drilling techniques. -
Q: Can I use the drill/driver with other DEWALT battery packs?
A: Yes, as long as the battery pack is compatible with the 18V Li-Ion battery type, you can use it with the DCD991 and DCD996 models. -
Q: How can I maintain my DEWALT cordless drill/driver?
A: To ensure optimal performance and longevity of your tool, regularly clean the exterior, check for any loose screws or parts, and keep the battery pack charged when not in use. Refer to the user manual for detailed maintenance instructions.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>