Arcury TP16 Professional Video Tripod Instruction Manual
- June 15, 2024
- Arcury
Table of Contents
Arcury TP16 Professional Video Tripod
Parts
Parameters
Mode| Material| Weight (kg)| Load (kg)| Diameter (mm)| Height (cm)| Folded
(cm)
---|---|---|---|---|---|---
TP16| Aluminum| 4.04| 10| 14-20| 86-196| 90
Installation and Operation
-
Install the camera:
Through the screws on the quick release plate, insert the quick release plate into the head panel holder and lock the tilt locking knob. -
Install the handle:
According to your personal habits, you can install the handle on the left or right side of the installation port, and turn the lock button until it is locked.
-
Pan and tilt rotation of the head:
The pan lock knob allows the head to be locked in the pan direction and the tilt lock knob allows the head to be locked in the tilt direction. -
Center of gravity adjustment of your camera:
Move the position of the quick-release plate in the panel holder to adjust the center of gravity of the camera on the tripod. -
Vertical shooting:
Press the vertical shooting switch button on the left side of the head, flip the plate to 90° and then release the button.
-
Horizontal adjustment:
Loosen the handle and move it up and down to adjust the bowl to horizontal, until the bubble in the spirit level is at the middle position. -
Head disassembly and installation:
Disassembly: Rotate the bowl-handle counterclockwise, until it is completely removed.
Installation: Place the head in the bowl, rotate the bowl-handle clockwise to and tighten it.
-
Tripod unfolded:
-
Loosen the locking knobs on the legs, the tripod will slide down automatically, and re-tighten the knobs according to the required height to fix the height of the tripod.
-
Spread the legs of the tripod to a suitable angle, and turn the knobs on the spreder to lock.
Precautions
- Do not use the tripod at temperatures below -40°C or above 70°C.
- Keep it clean and dry after using, not recommended for use in seawater.
- It is prohibited to carry and move the tripod with camera or video-recording devices.
- Please do not add unauthorized or inappropriate lubricating oil.
- To ensure personal safety, please do not contact with electric products, high-voltage equipment or strong chemicals when using this tripod.
- Please do not use excessive force to avoid any damage to the parts.
- Do not exceed the maximum load capacity (10kgs).
Troubleshooting Guide
| Problem | Causes | Suggestions |
|---|---|---|
| The head shaking |
The head does not attach well to the bowl
| Re-connect the head with the bowl
Quick-release plate can not be removed| Lock knob not loosened/ Failure to
press safety bolt| Loose the lock knob, and press the safety bolt,
Simultaneously pull out the quick-release plate
After camera mounted, the head tilt forward or backward| Quick release plate
is not in the right place| Adjust the front and back position of the quick
release plate until the platform is in a horizontal state
Contents
| Name | Qty (pcs) | Use | |
|---|---|---|---|
| 1 | Video Tripod | 1 | / |
| 2 | Quick Release Plate | 1 | / |
| 3 | Tool Kit | 1 | For maintenance |
Product design and specifications are subject to change without notice. www.arcury.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>