ARCURY SL-P60 Portable LED Video Light User Manual
- June 1, 2024
- Arcury
Table of Contents
ARCURY SL-P60 Portable LED Video Light User Manual
FOREWORD
Thank you for purchasing this ARCURY product. Please read the product manual carefully before use. Wish you a pleasant shopping.
SL-P60 portable LED video light with the feature of compact size, easy to carry, can be used for video conference, film recording, photography, live broadcast, selfie and other scenes. Built-in 2000mAh battery provides about 2 hours of use.
BRIEF -INTRODUCTION
The SL-P60 is available in three color temperature modes, 2500K/450OK/9000K, with 10 levels of adjustable brightness.
SAFETY- NOTE
In order to prevent any damage to your products or the safety of users, please read the following safety precautions thoroughly before use and keep this manual so that all users of this product can refer to it at any time. Before operating this product, please read this manual carefully and keep it properly for future reference.
OPERATION -MANUAL
Switch Operation
In the off state, long press the power button for 3 seconds to turn on the
power.
In the on state, long press the power button for 3 seconds to turn off the
power.
Mode Switching
Under the power-on state, click the power button to switch the three color
temperature modes of 2500K,
4500K and 9000K.
Brightness Adjustment
Under any mode, click +, – button to adjust the brightness. The brightness is
adjustable in 10 levels.
Charging
Use a compliant Type-C or Micro USB cord to charge the LED light.
When charging, the power indicator will be blinking; when all the indicator
lights are in constant light, it means the charging is completed.
PARTS
- luminous surface
- Type-C charging port
- Micro USB charging port
- Decrement key
- Increment key
- Power switch/mode switch
- Screw clip
- Angle adjustment knob
- Display/indicator
- Phone holder
- Fixed knob
- 1/4 screw hole
- Parameter switching
INSTALLATION OF BRACKETS
Screw Clip
Mounted through 1/4′ screw holes, just tighten the knob to fix the light.
Phone Holder
- Fit the single buckle of the phone holder into the slot on the back of the LED light.
- Push and pull the holder in the direction of the double-button position until the 01double-button position of the holder fits into the slot on the edge of the LED light.
- Open the cell phone fixing buckle of the phone holder.
- As shown in the picture, the phone is mounted in the specified direction.
TECHNICAL -DATA
| Product Model | SL-P60 |
|---|---|
| Color Temp. | 2500K/4500K/9000K (±200K) |
| Light Brightness | 0-100% Adjustable |
| LED Beads | 60 pcs |
100% lux
| Distance| 2500K| 4500K| 9000K
0.3m| 900| 1200| 1000
0.5m| 350| 500| 400
CRI| ≥95
TLCI| ≥97
Built-in Battery| 3.7V 2000mAh (7.4Wh)
Power| Max. 4W
Battery Duration| About 1.5 hours at maximum power
Charging Port| Type-C/Micro1USB
Accessories| Screw Clip, Phone Holder
Dimensions| 104×75×11.8mm
Net Weight| 140g
Contents| LED1Light, Charging Cable, Screw Clip, Phone Holder, User Manual
CAUTIONS
- This product is not waterproof or dustproof.
- Do not subject the product to strong impact.
- Please do not look directly at the light-emitting surface to avoid visual impairment.
- After the charging is completed, the power cord should be unplugged as soon as possible.
- If the product has not been used for a long time, please charge the battery before using.
- it is recommended to charge once every 3 months, which is beneficial to the service life of the battery .
