JCPenney BFS-5900 Portable Speaker Instruction Manual

JCPenney BFS-5900 Portable Speaker

Carefully read the operating manual to operate this unit properly, and keep this manual For Further reference.

IMPORTANT INSTRUCTION

1. THIS UNIT HAS A RECHARGEABLE BATTERY WHEN THE BATTERY POWER IS DRAINED, PLEASE PLUG THE SWITCH INTO AN ELECTRICAL SOCKET ACCORDING TO THE INPUT VOLTAGE.
2. PLEASE NOTE IF THE VOLTMETER IS GOING BELOW 12V WHICH SHOWS THE BATTERY IS GETTING LOW, IT MEANS THE UNIT NEEDS TO CHARGE. WHEN THE UNIT IS CHARGING, PLEASE MAKE SURE THE AC/DC SWITCH IS
   • ON. ONCE CHARGED, PLEASE UNPLUG THE SOCKET FROM THE ELECTRICAL OUTLET SAFELY.
   • YOU HAVE TO CHARGE THE BATTERY FOR 10 TO 12 HOURS FOR FIRST USE, AND 8 TO 10 HOURS FOR ALL FUTURE USES.
   • THE BATTERY CAN LAST 5 TO 6 HOURS ACCORDING TO THE VOLUME OF THE SPEAKER.
3. IF YOU CHANGE THE FUSE, PLEASE USE 10AMP FUSE ONLY.

ATTENTION

1. TO PROLONG THE BATTERY LIFE, PLEASE CHARGE THE BATTERY AFTER EACH USE. IF THE SPEAKER IS NOT USED OR CHARGED FULLY FREQUENTLY, BATTERY DAMAGE MAY OCCUR.
2. IF ANY ISSUE WITH THE PRODUCT ARISES, PLEASE CONTACT A PROFESSIONAL TO HANDLE ANY REPAIRS AS THIS UNIT IS A HIGH-POWER ELECTRONIC.
3. PLEASE KEEP AWAY FROM CHILDREN.

PANEL FUNCTION DECLARATION

1. USB/TF/SD CARD SLOT
2. PLAY, PAUSE, REWIND, FAST FORWARD, SHUFFLE, REPEAT, RECORD FEATURES
3. AUX OUTPUT/INPUT
4. MIC.PRI
5. DC INPUT
6. POWER: FULLY/CHARGED/LOW
7. ANTENNA
8. LIGHT SWITCH
9. AC INPUT
10. MIC. INPUT JACK
11. MIC. VOLUME LEVEL
12. ECHO VOLUME LEVEL
13. GUITAR VOLUME LEVEL
14. TREBLE VOLUME LEVEL
15. BASS VOLUME LEVEL
16. MAIN VOLUME CONTROL
17. GUITAR INPUT JACK
18. POWER ON/OFF

REMOTE FUNCTION DECLARATION

1. PRESS FOR MUTE
2. SHUFFLE
3. RECORD
4. VOLUME UP
5. PREVIOUS SONG
6. PLAY, PAUSE, AND SCAN
7. VOLUME DOWN
8. REPEAT SONG
9. RECORD PLAY
10. NEXT SONG
11. EQ
12. 0-9 SELECTION FOR CHOOSING SONGS

BLUETOOTH FUNCTION DECLARATION

1. PRESS THE MODE BUTTON ON THE FRONT PANEL TO LAUNCH THE BLUETOOTH APPLICATION. YOU WILL THEN SEE THAT “BLUE” SHOWS ON THE SCREEN.
2. SLIDE THE “BLUETOOTH” SWITCH TO “ON” ON SPEAKER. MAKE SURE BLUETOOTH IS ACTIVATED ON THE DEVICE YOU WISH TO CONNECT. YOUR DEVICE (CELLPHONE, COMPUTER, ETC.) WILL AUTOMATICALLY BEGIN SCANNING FOR NEARBY BLUETOOTH DEVICES.
3. TAP THE ENTRY FOR THE BLUETOOTH ACCESSORY WHEN YOUR DEVICE HAS DETECTED THE SPEAKER AND DISPLAYED ON THE SPEAKER SCREEN. BLUETOOTH IS NOW READY TO OPERATE.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>