Goldair GPTF480 100cm Multi Season 3n1 Bladeless Tower Heater and Fan with Wifi Instruction Manual

June 4, 2024
GOLDAIR

Goldair GPTF480 100cm Multi Season 3n1 Bladeless Tower Heater and Fan

with Wifi Instruction Manual

General Care and Safety Guide

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the appliance by a person responsible for their safety.

  • Children should be supervised to ensure that they do not play with the appliance.

  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
    WARNING: You must not cover this appliance. Covering this appliance presents fire risk and will activate the safety fuse; permanently disabling the unit.
    WARNING: Do not use this appliance in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constantsupervision is provided.
    WARNING: To reduce the risk of fire, keep textiles, curtains, or any flammable material a minimum distance of 1 metre from the air outlet. General Care and Safety Guide

  • Use only the voltage specified on the rating label of the appliance.

  • Keep all objects at least 1 metre from the front, sides and rear of the appliance.

  • This appliance is intended for household use only and not for commercial or industrial use.

  • Indoor use only.

  • This appliance incorporates an earth connection for functional purposes.

  • Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.

  • Do not use the appliance if it has been dropped or damaged.

  • The common cause of overheating is deposits of dust or fluff in the appliance.
    Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.

  • Never use the appliance to dry clothes.

  • Always unplug appliance when not in use. YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

  • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team.

  • Do not use if there are visible signs of damage to the appliance.

  • Do not connect the appliance to mains supply until completely assembled and adjusted.

  • Ensure hands are dry before handling the plug or main unit.

  • Ensure appliance is on a flat, stable, heat-resistant surface.

  • Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to become a hazard.

  • Carry out regular checks of the supply cord to ensure no damage is evident

  • Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions or has been dropped or damaged in any manner. Take to a qualified electrical person for examination, electrical service or repair.

  • Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.

  • It is recommended that this appliance is plugged directly into the wall socket. Power boards are not rated to supply power to high wattage appliances.

  • A correctly specified, undamaged extension cord may be used with this appliance provided it is used in a safe manner.

  • Do not remove plug from power socket until the appliance has been switched off.

  • Do not remove plug from power socket by pulling cord; always grip plug.

  • Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot be tripped over.

  • Don’t place appliance on bedding or on thick & long carpet where the openings may get blocked.

  • Switch off and use handle provided when moving

  • Do not place appliance close to radiant heat source.

  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire or damage to the appliance.

  • Do not sit on the appliance.

  • Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.

  • Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

  • Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming pool or other liquids.

  • The appliance must not be immersed in any liquids.

  •  There are no user serviceable parts installed in the unit.

  • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards. General Care and Safety Guide

  • This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored.

  • If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team. General Care and Safety Guide The remote control supplied with this d

The remote control supplied with this device uses a CR2032 coin type battery.

DANGER IF SWALLOWED

Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room.
Dispose of used batteries immediately.

Operating your Appliance

Always choose a safe location for the fan, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.

WARNING: In order to avoid overheating or fire, do not cover the heater.
WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
WARNING: Do not use this heater with a programmer, separate timer, remote- control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly

WARNING: Never leave this heater unattended when in use. Ensure heater is on a flat, stable, heat-resistantsurface.
Once the heater is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet and switch on. The unit will now be in stand-by mode.
CAUTION: Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket. A partially inserted plug will overheat the plug and socket and could result in fire.

Operating your Appliance

Always choose a safe location for the fan, keeping in mind the safety precautions outlined Ensure all packaging has been removed from the unit before use This
appliance requires no installation, it should be used solely as a portable appliance

WARNING In order to avoid overheating or fire, do not cover the heater
WARNING Keep all objects at least 1 metre from the front, sides and rear of the appliance
WARNING Do not use this heater with a programmer, separate timer, remote control system or any other device that switches the heater on\ automatically, since a fire risk exists if the heater is covered or positioned incorrectly
WARNING Never leave this heater unattended when in use

Ensure heater is on a flat, stable, heat resistant surface Once the heater is in a safe operating position and all switches are in the off
position, insert the power plug into the mains outlet and switch on The unit will now be in stand by mode

CAUTION Ensure the power cord is not tight because if pulled it may partially pull the plug from the socket A partially inserted plug will overheat the plug and socket and could result in fire

Operating your Appliance

1 Display 8 Remote Control: Speed Settings (up)
2 Power Button 9 Remote Control: Mode
3 Air Grill 10 Remote Control: Oscillation
4 HEPA or Carbon Filter 11 Remote Control: Speed Settings (down)
5 HEPA or Carbon Filter 12 Remote Control: Air Purifiy Mode
6 Air Grill 13 Remote Control: Power Button
7 Remote Control: Timer 8+11 Remote Control: Child Lock

THIS APPLIANCE CAN ONLY BE OPERATED FROM THE REMOTE CONTROL OR WIFI INTERFACE

**Power**

Press to turn the unit ON/OFF

Mode

Press to change the device between Heating & Cooling mode

Fan Speed

Press the + and – buttons on the remote to adjust the speed settings. In cooling mode, there are 12 fan speed settings. In heating mode there are 7 heat settings.
Note: when in heating mode the unit will only run continuously for 6 hours. You will need to switch the unit off to reset.

Oscillation

Press to turn horizontal oscillation ON/OFF

Timer

If the unit is ON, you can set a countdown timer for the device to switch OFF. If the device is in stand-by mode, then you can set a timer for the device to switch ON.
Press the timer button and use the + and – buttons to adjust the length of time in 1 hr increments. Choose between 1-12 hours.

Air Purify

Press to turn on Air Purification mode . Using the included HEPA filter and UV lights, this will draw in and remove unwanted allergens from the air.

Operating your Appliance

Child Lock Press the + and – buttons at the same time to turn on Child Lock. A lock symbol will appear on the display and no functions can be operated. To turn off Child Lock, hold down the + and – buttons.

Filter Replacement

The HEPA filter will need replacing after 600 hours use.
The indicator light will flash when the filters need replacing.

The remote control supplied with this device uses a CR2032 coin type battery.
DANGER IF SWALLOWED

Please store your remote on the magnetic remote control holder on the back of the appliance.

WiFi – Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz capable
Note this device will only work within your home WIFI system.
This does not operate on 3G or 4G internet connections.
You will need a connection to your home Wi-Fi.

Download

Goldair mobile APP

  • Open the APP Store or Google Play on your mobile phone.
  • Open ‘Search’ and enter ‘Goldair’
  • Click ‘GET’ and begin to download and install. Once downloaded to your phone open the APP
  • Tap REGISTER near the bottom of the screen.
  • Read and agree to the Privacy Policy.
  • Add your email address.
  • Tap ‘Obtain verification

You will then receive an email with a verification code.

  • Enter the verification code from your email.
  • Create a password.
  • Then tap confirm. If

If you haven’t received a verification code via email, tap the resend button and when the verification code is received follow above steps.

Your APP is now registered and ready for pairing to your device.

Pairing APP to Device

Details for pairing this heater to the Goldair App can be found at the below website link Either scan the QR code below or enter the website into your browser

Pairing Mode

To connect to the Goldair app you must ensure that your device is in pairing mode which is where the Wifi Icon is flashing
The device will be in pairing mode when you first switch it on, if it is not then:
– Put device in STAND BY mode (ON at the wall but device is OFF)
– Press and HOLD the POWER BUTTON for around 5 seconds or until the Wifi icon begins to flash.

Quick Connection

  • Turn your phone’s Bluetooth ON
  • Ensure your device is in Pairing Mode (see instructions above)
  • Tap the + on the top right corner to navigate to the main device Tap ‘Auto Scan’ – your device will appear. Tap the device and follow the instructions.
  • If Quick Connection does not work, follow the manual via the QR Code above

SAFETY DEVICES

This appliance has three protection devices:

  • Tilt switch – this will automatically turn the appliance off if the appliance is not in the correct operating
  • Resettable thermal link – this will automatically disconnect the power to the appliance at a pre-set overheat To Reset Unit –
    • Unplug the unit and wait 10 minutes for the unit to cool
    • After the unit has cooled down, plug the unit into the electrical outlet and

follow the operation instructions described in this manual.

If this occurs again, investigate what is causing the appliance to overheat.

  • Thermal fuse – this disconnects the appliance permanently in case of (It is non resettable).

CAUTION: The appliance generates heat during use. Precautions must be taken to prevent the risk of burns, scalds, fires or other damage to persons.

CARE AND CLEANING

The appliance requires regular cleaning to ensure trouble free operation:

  • Unplug the appliance from the mains supply before cleaning.
  • Ensure that the appliance has been allowed to cool down completely before
  • The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and
  • Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and
  • Never use solutions such as petrol, thinners or polishing
  • Ensure the appliance is dry before plugging back into the mains
  • Do not attempt to dismantle the
  • There are no user serviceable For service or repair, contact an authorised electrical service technician.

Three Year Warranty

Thank you for purchasing this Goldair Platinum product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of three years. In non-domestic use Goldair limits the voluntary warranty to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act (1993

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

GOLDAIR User Manuals

Related Manuals